Publication Year 2012

  1. A.E. Ismail, A.K. Ariffin, S. Abdullah & M.J. Chazali. 2012. Stress intensity factors under combined tension and torsion loadings, Indian Journal of Engineering & Materials Sciences, 19:5-16.
  2. A.E. Ismail, A.K. Ariffin, S. Abdullah, M.J. Ghazali. 2012. Stress Intensity Factors for Surface Cracks in Round Bar under Single and Combined Loadings Meccanica, 47:1141-1156.
  3. Ahmad Rasdan Ismail, Baba Md Deros, Mohd Yusri Mohd Yusof, Mohd Hanifiah Mohd Haniff, Isa Halim. 2012. Modelling and Optimization Approach of Quantitative Environmental Ergonomics in Malaysian Automotive Industry, Journal of Occupational Safety and Health, 9(1):7-14.
  4. Ahmad Rasdan Ismail, Shashi Kumar S A Karagaratnan, Rozli Zulkifli, Baba Md Deros, Mohd Nizam Abdul Rahman, 2012. A Review on Thermal Comfort Assessment in Malaysian Industries, Jurnal Teknologi (Sciences & Engineering), 59:7-11.
  5. B. Daryakenari, S. Abdullah, R. Zulkifli, A. Shamsudeen. 2012. Numerical Study of Multiple Channel Road Vehicle Underbody Diffusers, International Review of Mechanical Engineering, 6(3):583-587.
  6. Choon Lih Hoo, Sallehuddin Mohamed Haris, Nik Abdullah Nik Mohamed, 2012. A floating point conversion algorithm for mixed precision computations, Journal of Zhejiang University-Science C-Computers & Electronics, 13(9):711-718.
  7. E.A. Azrulhisham, D.A. Wahab, S. Abdullah, N. Nikabdullah, C.H. Che Haron. 2012. Inverse Power Law Model for Extrapolation of Fatigue Life Curves, International Review of Mechanical Engineering, 6(3):685-690.
  8. Elwaleed Awad Khidir, Nik Abdullah Mohamed, Sallehuddin Mohamed Haris. 2012. Geometrical Amplification of SMA Actuator Displacement Using Externally Actuated Beam, Sensors & Transducers, 144(9):92-100.
  9. Hyder H. Balla, Shahrir Abdullah, Rozli Zulkifli, Wan Mohd Faizal and Kamaruzzaman Sopian. 2012. Effect of oxides nanoparticle materials on the pressure loss and heat transfer of nanofluids in circular pipes, Journal of Applied Sciences, 12(13):1396-1401.
  10. J.A. Ghani, M. Rizal, M. Zaki Nuawi, C.H. Che Haron. 2012. Development of an Adequate Online Tool Wear Monitoring System in Turning Process using Low Cost Sensor, Advanced Science Letters,13:702-706.
  11. Jaharah A. Ghani, Poh Siang Jye, Che Hassan Che Haron, Muhammad Rizal, Mohd Zaki Nuawi. 2012. Relationship Between Measurement of Cutting Force and Sensor Location in Turning Process, Jurnal Teknologi, 59:91-94.
  12. Jawad, L.H., Abdullah, S., Zulkifli, R., Mahmood, W.M.F.W. 2012. Modelling of centrifugal compressor impellers using adaptive neuro- fuzzy inference systems (ANFIS), International Review of Mechanical Engineering, 6(5):1011-1017.
  13. Jawad, L.H., Abdullah, S., Zulkifli, R., Mahmood, W.M.F.W. 2012. Prediction of centrifugal compressor performance by using adaptive neuro-fuzzy inference system (ANFIS), International Review on Modelling and Simulations, 5(4):1580-1587.
  14. M. Abdul Razzaq, A.K. Ariffin, Ahmed Al-Shafie, S. Abdullah, Z. Sajuri, A.E Ismail. 2012. Fatigue Life Prediction With Different Load Sequences Using ANFIS, Journal of Materials Engineering and Performance, 1-22 (No. ISSN 1059-9495).
  15. M.F. Mat Tahir, M.Z. Nuawi, R. Zulkifli, S. Abdullah, M. A. Mohd Sabri. 2012. Study on Correlation of Sound Absorption Coefficient for Automotive Noise Absorption Panel Material by Using Sabine Method and Z-Octave Method, International Review Of Mechanical Engineering (IREME), 6(3):640-643.
  16. M.J. Suriani, Aidy Ali, A. Khalina, S. M. Sapuan, S. Abdullah, Haftirman. 2012. Detection of Defects in Natural Composite Materials Using Thermal Imaging Technique, Materials Testing, 54(5):340-346.
  17. M. Mohammad, S. Abdullah, N. Jamaluddin and M.M. Padzi. 2012. On The Need to Correlate Acoustic Emission and Fatigue Strain Signals Associated to Metallic Component Life Assessment, International Journal of Mechanical and Materials Engineering, 7(1):78-82.
  18. M.S. Javadi, M.A. Hannan, S.A. Samad and A. Hussain. 2012. A Robust Vision-Based Lane Boundaries Detection Approach for Intelligent Vehicles, Information Technology Journal, 11(9):1184-1192.
  19. M.M. Padzi, S. Abdullah, M.Z. Nuawi, A. Shamsudeen. 2012. Fatigue Failure Assessment of Variable Amplitude Loading (VAL) on Carbon Steel AISI 1045 using I-kaz Approach, International Review of Mechanical Engineering, 6(3):578-582.
  20. Md. Ayub, Mohd Jailani Mohd Nor, Mohammad Hosseini Fouladi, Rozli Zulkifli and Nowshad Amin. 2012. A practical acoustical absorption analysis of coir fiber based on rigid frame modeling, Acoustical Physics, 58(2); 246-255.
  21. Mohd Amin At-Tasneem, Sallehuddin Mohamed Haris, Zulkifli Mohd Nopiah. 2012. A computing capability test for a switched system control design using the Haris-Rogers method, Journal of Zhejiang University – Science C, 13(10):781-792.
  22. Mohd Azhar Sahwan, Mohd Nizam Ab Rahman, Baba Md Deros. 2012. Barriers to Implement Lean Manufacturing in Malaysian Automotive Industry, Jurnal Teknologi (Sciences & Engineering), 59:107-110.
  23. Mohd Faridz Mod Yunoh, Shahrum Abdullah, Azman Jalar and Mohamad Faizal Abdullah. 2012. Cyclic Loading Effect on Durability Assessment of Microelectronics Packaging Using Statistical Strain Signal Analysis, Journal of Nanoelectronics and Optoelectronics, (7): 1-3.
  24. N.A. Khadim, S. Abdullah & A.K. Ariffin. 2012. Effective strain damage model associated with finite element modelling and experimental validation, International Journal of Fatigue, 36(1):194-205.
  25. N.K. Khamis, M.Z. Nuawi, S. Abdullah, Z.M. Nopiah, L. Abdullah. 2012. Signal Analysis Software as an Educational Tool for Engine Diagnostic System, International Review of Mechanical Engineering, 6(3):666-670.
  26. Nurazua Mohd Yusop, Dzuraidah Abdul Wahab, Nizaroyani Saibani. 2012. Analysis of Remanufacturing Practices in the Malaysian Automotive Industry, Jurnal Teknologi (Sciences & Engineering), 59(2):77-80.
  27. Rizauddin Ramli and Mohammad Nizam Arffin. 2012. Reliability Centered Maintenance in Schedule Improvement of Automotive Assembly Industry, American Journal of Applied Sciences, 9(8):1232-1236 .
  28. Rozli Zulkifli, Ali Ahmed Gitan, Kamaruzzaman Sopian, Shahrir Abdullah. 2012. Multiple Pulsating Jets Mechanism for Heat Transfer Enhancement, International Review of Mechanical Engineering, 6(3):654-658.
  29. S. Ataollahi, S.T. Taher, R.A. Eshkoor, A.K. Ariffin, C.H. Azhari. 2012. Energy absorption and failure response of silk/epoxy composite square tubes: Experimental, Composites: Part B, 43:542-548.
  30. S.A. Oshkovr, R.A. Eshkoor, S.T. Taher, A.K. Ariffin, C.H. Azhari. 2012. Crashworthiness characteristics investigation of silk/epoxy composite square tubes, Composite Structures, 94(8):2337-2342.
  31. Salih A.A., Omar M.Z., Syarif J., Sajuri Z. 2012. An investigation on the microstructure and mechanical properties of quenched and tempered SS440C martensitic stainless steel, International Journal of Mechanical and Materials Engineering, 7(2):119-123.
  32. Shahrum Abdullah, Kamarul Ariffin Zakaria, Mariyam Jameelah Ghazali. 2012. Observation of the fatigue Crack Propagation Rate of an Aluminium Alloy Specimen under Fatigue Spectrum Loadings, Materials Testing, 54(10):663-673.
  33. Suhartini Mohd Jainury, Rizauddin Ramli, Mohd Nizam Ab Rahman, Azhari Omar. 2012. An Implementation of Set Parts Supply System in the Malaysian Automotive Industry, Jurnal Teknologi (Sciences & Engineering), 59(2):19-24.
  34. T.F. Go, D.A. Wahab, M.N. Ab. Rahman R. Ramli, A. Hussain. 2012. Genetically optimised disassembly sequence for automotive component reuse, Expert Systems with Applications, 39(5):5409-5417.
  35. Taib Iskandar Mohamad, Mark Jermy, Anni Kaisa Vuorenskoski, Matthew Harrison. The Effects of Propane and Gasoline Sprays Structures from Automotive Fuel Injectors under Various Fuel and Ambient Pressures on Engine Performance, World Applied Sciences Journal, 18(3):396-403.
  36. Wajdi S. Aboud, Sallehuddin Mohamed Haris. 2012. A study on load dependent controller performance for mechatronic suspensions. International Review of Mechanical Engineering, 6(3):611-616.
  37. Z. Harun, I. Marusic, J.P. Monty and R. Mathis. 2012. Effects of Pressure Gradient on Higher Order Statistics in Turbulent Boundary Layers, Turbulence, Heat and Mass Transfer 7, Begell House, Inc.

Translate »