Seminar

List of seminar/conference organised/co-organised by CAR

SEMINAR /CONFERENCE TITLEDATE/VENUE SPEAKER
The Importance and Latest Development of Crash Safety Engineering26th May 2017, Faculty of Engineering and Built Environment, UKM• Mr. Mohd Syazwan Solah
• Mr. Azhar Hamzah
Malaysian Institute of Road Safety Research (MIROS)
Design and Development of a Simulation Environment and a Fault Isolation Scheme on A Volvo VEP4 MP Engine16th November 2016, Faculty of Engineering and Built Environment, UKM• Dr. Mark Ng, Electrical and Computer Systems Engineering, School of Engineering, Monash University of Malaysia
Symposium on Damage Mechanisms in Materials and Structures 9th August 2016, Bangi Hotel• Prof. Akiyuki Takahashi, Tokyo University of Science, Japan
• Ir. Dr. Ezzarhan Abdullah, Department of Occupational Safety and Health, Malaysia
Invited Lecture Series: Lectures on Energy Systems and Drivetrains
4 December 2015, Design Room, JKMB, FKAB• Prof. Volker Schindler (formerly, of TU Berlin and BMW, Germany)
3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR) 20151-3 December 2015, Holiday Inn Hotel, Melaka• Prof. Mingcong Deng (Tokyo University of Agriculture & Technology, Japan)
• Dato' Sri Syed Zainal Abidin Syed Mohamed Tahir (CMS Consortium Sdn Bhd - COMOS, Malaysia)
• Dr. Lin Xiaobin (HBM-nCode, Shanghai Division, China)
• Prof. Volker Schindler (formerly, of TU Berlin and BMW, Germany))
• Mr. Masaharu Ohya (RION Co. Ltd. Japan)
• Mr. Dieter Lim (VTC Solution Sdn Bhd, Malaysia)
5th International Conference on Noise, Vibration & Comfort (NVC) 20151-3 December 2015, Holiday Inn Hotel, Melaka• Prof. Mingcong Deng (Tokyo University of Agriculture & Technology, Japan)
• Dato' Sri Syed Zainal Abidin Syed Mohamed Tahir (CMS Consortium Sdn Bhd - COMOS, Malaysia)
• Dr. Lin Xiaobin (HBM-nCode, Shanghai Division, China)
• Prof. Volker Schindler (formerly, of TU Berlin and BMW, Germany))
• Mr. Masaharu Ohya (RION Co. Ltd. Japan)
• Mr. Dieter Lim (VTC Solution Sdn Bhd, Malaysia)
Invited Talk: Cooperative Research of
Universities and Industries in Germany
30 November 2015, Main Meeting Room, FKAB, UKM• Dr.–Ing Tobias
Bruckmann (Chair of
Mechatronics, University of
Duisburg-­‐Essen)
Automotive Forum: Success Factors for R&D Project Commercialization18 February 2015, Faculty of Engineering and Built Environment Meeting Room, UKM• Prof. Ir. Dr. Mohd Jailani Mohd Nor, Deputy Vice Chancellor
(Research & Innovation), Universiti Teknikal Malaysia Melaka (UTeM)
Technical Forum: Valeo Innovation Challenge21 January 2015, Faculty of Engineering and Built Environment Meeting Room, UKM• Mr. Jurin Memungtham ASEAN
HR Director
• Mr. Wan Adnan Wan Ramlan, Business Dev Manager, Malaysia
Automotive Seminar - New Car Assessment Program (NCAP),9 June 2014, Faculty of Engineering and Built Environment Meeting Room, UKM• Mr. Badruzzaman Abd. Rahman, Crash-Safety team, Perushaan Otomobil Nasional Berhad (PROTON)
Seminar on Efficient Concept Generation & Optimization Technology in Automotive & Design Engineering World2 June 2014, Faculty of Engineering and Built Environment Meeting Room, UKM• Mr. Khairulnizam Ruslan, ORS Technologies Snd Bhd
• Ms. Sharifah Zawanah Syed Ibrahim, ORS Technologies Snd Bhd
• Mr. Sharoul Jambari, RTG Intech
Invited Talk on Vehicles Dynamics: Transient and Steady-State Vehicles Dynamics19 December 2013, Faculty of Engineering and Built Environment Meeting Room, UKM• Professor Reza N. Jazar, RMIT Australia
2th International Conference in Automotive Engineering and Mobility Research (ReCAR) 201316-18 December 2013, Furama Hotel, Kuala Lumpur• Professor Reza N. Jazar, RMIT Australia
• Dr. Norlen Mohamed, Vehicle Safety and Biomechanics Research Centre, Malaysian Institute of Road Safety Research (MIROS)
• Professor Dato’ Ir. Dr. Wan Ramli Wan Daud, Fuel Cell Institute, Universiti Kebangsaan Malaysia
• Associate Professor Dr. Talal Yusaf, University of Southern Queensland, Australia
4th International Conference on Noise, Vibration and Comfort (ICNVC2012)26-28 November 2012, Melia Hotel, Kuala Lumpur, Malaysia• Professor Masanori Kikuchi, Tokyo University of Science
• Ir. Haji Tajul Zahari Abu Bakar, Perushaan Otomobil Nasional Berhad (PROTON), Malaysia
• Prof. Dr. David Thompson, ISVR, University of Southampton
• Prof. Ir. Dr. Benjamin Soenarko, Faculty of Engineering, Maranatha Christian University
Seminar on Importance of Machinery And Engineering Components In A Competitive Economy1 November 2012, Main Hall of Graduate Management Centre, UKM• Mr. Alhardy Ismail, Standards Research and Management Centre, SIRIM Berhad
• Ms. Nor Hashimah Ismail, Standards Research and Management Centre, SIRIM Berhad
• Ir. Luk Chau Beng, Chairman of Technical Committee on Machinery and Components
• Mr. Chua Lee Boon, Technical Committee on Machinery and Components
• Mr. Aminuddin Ghazali, Technical Committee on Machinery and Components
Thermofluids Research Group Seminar8-9 February 2012, Equatorial  Hotel, Bangi• Prof. Ir. Dr. Shahrir Abdullah, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia
• Assoc. Prof. Dr. Rozli Zulkifli, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia
Invited Talk on " Mechatronic Applications: A Lab Tour"16 December 2011, Faculty of Engineering and Built Environment Meeting Room, UKM• Dr. -Ing. Tobias Bruckmann, Universtiy Duisburg-Essen, Germany
Regional Conference on Automotive Research (ReCAR2011)14-15 December 2011, Royale Bintang Hotel, Kuala Lumpur, Malaysia• Mr. Sharoul Jambari, Head of Division - Capacity Building, Malaysia Automotive Institute (MAI)
• Mr. Muhammad Aris Anuar, Head of Manufacturing, PROTON
• Prof. Ir. Dr. Shahrir Abdullah, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia
• Prof. Dr. Ir. Benjamin Soenarko, Maranatha Christian University, Indonesia
• Prof. Dr.-Ing. Dieter Schramm, University Duisburg-Essen, Germany
Courses/Seminar on Theory and Training of Modefrontier Software : Design Optimization Theory13 April 2011, CRIM Conference Hall, Universiti Kebangsaan Malaysia• Mr. Dieter Lim, VTC Solution Sdn Bhd
• Dr. Waleed Fekry Faris, International Islamic University of Malaysia (IIUM)
Industrial Seminar: R&D in CFD Tools: MSC.Software University Program25 January 2011, Design Room, JKMB, Universiti Kebangsaan Malaysia• Mr. Ir. Abdul Malik, Automated Design Express Sdn Bhd
Invited Talk  on Engineering Research: Overview on Fracture of Piezoelectric Materials17 January 2011, Faculty of Engineering and Built Environment Meeting Room, UKM• Professor Dr. Tong-Yi Zhang, Hong Kong University of Science and Technology (HKUST), Hong Kong, China
Industrial Seminar" The Extent of FEA Revolution Technology Towards Mechanical Engineering Design13 January 2011, Design Room, JKMB, UKM• Mr. C. J. Quah, NUMIT Exterprise
Seminar on Damage and Fracture Processes in Engineering Materials: Modelling Aspects8 October 2010, Faculty of Engineering and Built Environment Meeting Room, UKM• Prof. Dr. Mohd Nasir Tamin, Universiti Teknologi Malaysia (UTM).
The 3rd Regional Conference on Noise, Vibration and Comfort (NVC) 201028-30 June 2010, Hotel Pullman, Putrajaya• Professor Dr.-Ing Klaus Genuit, Acoutics GmbH (Germany)
• Professor Dr. Samir Nagi Yousri Gerges, Federal University of Santa Catarina (Brazil)
• Professor Dr. M.L. Munjal, Indian Insitute of Science (India)
• Dr. Slaheddine Frikha, Innovation and Advanced Project, ESI Group (France)
• Mr. Harry K. Zaveri, Brule & Kjaer (Denmark)
Intensive Course of Electronic Control Unit (ECU) in Automotive Engine22-23 February 2010, Computer Lab CAD/CAM and Department of Mechanical and Materials Lab, UKM• Dr. Asep Rukmaya, Institut Teknologi Bandung, Indonesia
Seminar on Electronic Control Unit (ECU) for Automotive Engine17 February 2010, Bilik Majlis, Bangunan Canselori, UKM• Assoc. Prof. Dr. Ishak Haris, Institut Teknologi Maju, Universiti Putra Malaysia
• Mr. Mohd Khair Hassan, Institut Teknologi Maju, Universiti Putra Malaysia
Industry Product Seminar: Yasuda Seiki Product - Testing Machine18 October 2010, Design Room, JKMB, UKM• Mr. Hj. Khairil A. Yacub, KL Analytical Sdn Bhd
• Mr Hedi San of Yasuda, KL Analytical Sdn Bhd
Engine Measurement and Research Seminar (EMARS 2009)29 May 2009, CRIM Conference Hall, UKM• Mr. Prabhaker Balakrishnan, Kistler Instrument Pte Ltd (Singapore)
• Mr. Marshall Kuno, Kistler Instrument Pte Ltd (Singapore)
• Prof. Ir. Dr. Yusoff Ali, Faculty of Engineering and Built Environment (UKM)
Instrumentation and Diagnostic Measurement on Engine Testing Seminar (IDMETS 2008)02 July 2008, Hotel Marriott, Putrajaya• Engineer Andreas Kieslinger, Dewetron Pte Ltd (Singapore)
• Engineer Kuno Marshall, Kistler Instrument Pte Ltd (Singapore)
• Mr. Ivan Tan, IPSH Gasmaster Sdn Bhd (Malaysia)
• Mr. Harold Hochstadt, Orbital Engine Company (Australia)
• Dr. Mike Khoo Yong Chuan, TSI Asia-Pasific Incorporated (Singapore)
• Mr. Yap Haw Shin, VTC Solution Sdn Bhd (Malaysia)
• Prof. Ir. Dr. Yusoff Ali, Faculty of Engineering and Built Environment (UKM)
Translate »