Penerbitan Tahun 2016

  1. Ahmed Rithauddeen Yusoff, Baba Md Deros, Dian Darina Indah Daruis, Leonard Joseph Henry, 2016. Power spectrum density (PSD) analysis of automotive pedal-pad, Journal of Engineering Science and Technology, 1: 20-27.
  2. Baba M. DEROS, Dian D.I. DARUIS, Sivadass THIRUCHELVAM, Rohayu OTHMAN, Dzulkarnain ISMAIL, Nor Faezah RABANI, Mohd F.M. HATTA, Amar HASSAN and Nur Iznie M. ZAKARIA, 2016. Evaluation on Ambulance Design and Musculoskeletal Disorders Risk Factors among Ambulance Emergency Medical Service Personnel, Iranian Journal of Public Health, 45: 52-60.
  3. Badrullzamin Mohd Yassin, Rozli Zulkifli, Wan Ramli Wan Daud, Shahrum Abdullah, 2016. Flexural Behaviour of Uni-Directional Kenaf Composites Using Experimental and Simulation Methods, International Journal of Mechanical & Mechatronics Engineering, 16: 57-64.
  4. Darliana Mohamad, Baba M. Deros, Dian D. I. Daruis, Norhidayah F. Ramli, Ezrin H. Sukadarin, 2016. Comfortable drivers car seat dimensions based on Malaysian anthropometrics data, Iranian Journal of Public Health, 45: 106-113.
  5. Darliana Mohamad, Baba Md Deros, Dian Darina Indah Daruis & Ahmad Rasdan Ismail, 2016. Assessing the reliability of subjective evaluation for comfortable driving postures, Malaysian Journal of Public Health Medicine, 16: 14-19.
  6. Deros, B.M, Daruis DDI, Rozia HMN, 2016. Noise monitoring case study: liquefied petroleum gas terminal, Malaysian Journal of Public Health Medicine, 16: 68-74.
  7. Ezrin Hani Sukadarin, Baba Md Deros, Jaharah A. Ghani, Ahmad Rasdan Ismail, Nur Syazwani Mohd Nawi, Norhidayah Abdull, 2016. Validity test for simple ergonomics risk assessment (SERA) method, Malaysian Journal of Public Health Medicine, 16: 134-143.
  8. Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, 2016. Soot particle measurement in engine cylinder: a review, Jurnal Teknologi, 78: 187-195.
  9. Ismail F.R., Khamis N.K., Nuawi M.Z., Schramm D., Hesse B. , 2016. Measurement of heart rate to determine car drivers? performance impairment in simulated driving: An overview, Jurnal Teknologi, 78: 15-23.
  10. Ismail F.R., Nuawi M.Z., Schramm D., Khamis N.K. , 2016. Suitability of driving simulators as a tool to study driving fatigue due to vibration and environment: A review, Malaysian Journal of Public Health Medicine, 1: 95-101.
  11. F. Mustafa, S. Abdullah, M.Z. Abdullah, K. Sopian, 2016. Comparative assessment of a porous burner using vegetable cooking oil-kerosene fuel blends for thermoelectric and thermophotovoltaic power generation, Fuel, 180: 137-147.
  12. Khamis,N.K., Deros, B.M., Ismail,F. R. & Tahir, N.H.M, 2016. Motorcycle deliverymans perceptions on riding conditions, Malaysian Journal of Public Health Medicine, 16: 63-67.
  13. Kong Y.S., Abdullah S., Omar M.Z., Haris S.M. , 2016. Topological and topographical optimization of automotive spring lower seat, Latin American Journal of Solids and Structures, 13: 1388-1405.
  14. Izhar Ghazali, Zambri Harun, Wan Aizon Wan Ghopa and Ashraf A. Abbas, 2016. Computational Fluid Dynamic Simulation on NACA 0026 Airfoil with V-Groove Riblets, International Journal on Advanced Science, Engineering and Information Technology, 6: 529-533.
  15. Mohd Azwan Husin, Rozli Zulkifli, Shahrum Abdullah and Wan Ramli Wan Daud, 2016. Mode II Delamination of Woven Mengkuang Fiber/Woven Silk Laminated Hybrid Composites, Materials Testing, 58: 374-380
  16. Mohd Azwan Husin, Rozli Zulkifli, Shahrum Abdullah, Wan Ramli Wan Daud, 2016. Kelakuan delaminasi komposit laminat hibrid anyaman gentian mengkuang/ gentian alat sutera/ epoksi, Jurnal Teknologi, 28: 67-74.
  17. Mohd Khairul Fadzly Md Radzi, Abu Bakar Sulong, Baharuddin Mohd Zanggi, Norhamidi Muhammad, 2016. Mouldability of wood filler reinforced polypropylene composite for injection moulded engine cover using mould filing simulation, Jurnal Teknologi, 78: 75-81.
  18. Mohd Radzi Abu Mansor, Masahiro Shioji, 2016. Investigation of the combustion process of hydrogen jets under argon-circulated hydrogen-engine conditions, Combustion and Flame, 173: 245-257.
  19. A. Aziz, D.A. Wahab, R. Ramli, C.H. Azhari, 2016. Modelling and optimisation of upgradability in the design of multiple life cycle products: a critical review, Journal of Cleaner Production, 112: 282-290.
  20. F.M. Selamat, A.H. Baghdadi, Z. Sajuri and A.H. Kokabi, 2016. Friction stir welding of similar and dissimilar aluminium alloys for automotive applications, International Journal of Automotive and Mechanical Engineering (IJAME), 13: 3401-3412.
  21. M. Yusop, D.A. Wahab, N. Saibani, 2016. Realising the Automotive Remanufacturing Roadmap in Malaysia: Challenges and the Way Forward, Journal of Cleaner Production, 112: 1910-1919.
  22. Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Fadzli Ibrahim, Shahrir Abdullah, Kamaruzzaman Sopian, 2016. Numerical Study of Hydrogen Fuel Combustion in Compression Ignition Engine under Argon-Oxygen Atmosphere, Jurnal Teknologi, 78: 77-83.
  23. Nik Muhammad Hafiz, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Masahiro Shioji, 2016. Simulation of the Effect of Initial Temperature and Fuel Injection Pressure on Hydrogen Combustion Characteristics in Argon-Oxygen Compression Ignition Engine, SAE Technical Papers, 2016 1-8.
  24. Nor Kamaliana K., Baba Md Deros, Dieter Schramm, Benjamin Hesse, Mohd Zaki Nuawi, Faizul Rizal Ismail, 2016. Subjective and indirect methods to observe drivers drowsiness and alertness an overview, Journal of Engineering Science and Technology, 1: 28-39.
  25. Nor Kamaliana Khamis, Faizul Rizal Ismail, Benjamin Hesse, Dieter Schramm, Niko Maas, Martin Koppers, Mohd Zaki Nuawi, Baba Md Deros, 2016. Suitability of heart rate recording as physiological measures tool to determine drivers` performance impairment: a preliminary study, Jurnal Teknologi, 78: 25-30.
  26. Nurhasyimah Abd Aziz, Dzuraidah Abd Wahab, Rizauddin Ramli, 2016. Evaluating Design for Upgradability at the Conceptual Design Stage, Jurnal Teknologi, 78: 37-43.
  27. Rahman N.A., Abdullah S., Zamri W.F.H., Abdullah M.F., Omar M.Z., Sajuri Z., 2016. Ballistic limit of high-strength steel and Al7075-T6 multi-layered plates under 7.62-mm armour piercing projectile impact, Latin American Journal of Solids and Structures, 13: 1658-1676.
  28. Rozmi Ismail, Mohamad Hanif Md Saad, Mohd Jailani Mohd Nor, Redzwan Rosli, 2016. Drivers readiness to use car driving simulator as a tool to improve driving skill: A preliminary study, Jurnal Teknologi, 78: 137-142.
  29. Rozmi Ismail, Ng Lei Voon, Mohamad Hanif Md Saad, Muhammad Saleem, Norhayati Ibrahim, 2016. Aberrant driving among young Malaysian drivers, Jurnal Teknologi, 78: 55-62.
  30. S. K. Singh, S. Abdullah & N. A. N. Mohamad, 2016. Reliability assessment for an automobile crankshaft under random loading, Jurnal Teknologi, 78: 91-96.
  31. Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali, 2016. Comparative Analysis of Performance and Emission of a Homogenous Combustion Compressed Natural-Gas Direct Injection Engine, International Journal of Mechanical & Mechatronics Engineering, 16: 173-183.
  32. Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali, 2016. Effect of fuel injection timings on performance and emissions of stratified combustion CNGDI engine, Applied Thermal Engineering, 109: 619-629.
  33. Saad Aljamali, Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Yusoff Ali, 2016. The Effect of Injection Timings on Performance and Emissions of Compressed Natural-Gas Direct Injection Engine, Journal of Combustion, 2016 1-7.
  34. Salvinder S., Shahrum A., Mohamed N.A.N., 2016. Discretized Markov chain in damage assessment using Rainflow cycle with effects of mean stress on an automobile crankshaft, Journal of Mechanical Science and Technology, 30: 3539-3551.
  35. Shamsul Akmar Ab Aziz, Mohd Zaki Nuawi, Mohd Jailani Mohd Nor, 2016. Development of Noise and Vibration Exposure Monitoring System for Malaysian Army (MA) Three-tonne Trucks, Jurnal Teknologi, 78: 9-15.
  36. Shukriah Abdullah, Rusalbiah Che Mamat, Baba Md Deros, 2016. Developing vendor improvement program in Malaysia automotive company, Journal of Engineering Science and Technology, 1: 48-55.
  37. Tze Fong Go, Dzuraidah Abd Wahab, Zuhair Fikri Fadzil, C.H. Azhari, Y. Umeda, 2016. Socio-Technical Perspective on End-of Life Vehicle Recovery for a Sustainable Environment, International Journal of Technology, 7: 889-897.
  38. S. Kong, S. Abdullah, M. Z. Omar & S. M. Haris, 2016. Failure assessment of a leaf spring eye design under various load cases, Engineering Failure Analysis, 63: 146-159.
  39. S. Kong, S. Abdullah, M. Z. Omar & S. M. Haris, 2016. Side force analysis of suspension strut under various load cases, Jurnal Teknologi, 78: 85-90.
  40. Yusoff, A.R. Deros, B.M., Daruis, D.D.I. and Joseph H, L., 2016. Tabialis anterior muscle contraction on drivers knee angle posture less than 101º for foot pressing and releasing an automotive pedal, Malaysian Journal of Public Health Medicine, 16: 102-107.
  41. Zambri Harun, Wan Aizon W. Ghopa, Shahrir Abdullah, M. Izhar Ghazali, Ashraf Amer Abbas, Mohd Rasidi Rasani, Rozli Zulkifli, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor, Zulkhairi Zainol Abidin, 2016. The Development of a Multi Purpose Wind Tunnel, Jurnal Teknologi, 78: 63-70.
  42. AA Pauzi, MJ Ghazali, S Mohd Yunus, WFHW Zamri, CH Azhari, S Husin, 2016. Wear characteristics of commercial gas turbine components, Tribology – Materials, Surfaces & Interfaces, 10: 82-85.
  43. Ahmad Firdaus Shamsul Baharin, Mariyam Jameelah Ghazali, Juyana A. Wahab, 2016. Laser surface texturing and its contribution to friction and wear reduction: a brief review, Industrial Lubrication and Tribology, 68: 57-66.
  44. Arshed Abdulhamed Mohammed, Sallehuddin Mohamed Haris, Mohd Zaki Nuawi, 2016. Utilizing Hilbert Huang transform in detection some of mechanical properties of the refractory metals, Mechanical Systems and Signal Processing, 68:-69 449-461.
  45. Haslina Abdullah, Rizauddin Ramli, Dzuraidah Abd Wahab, Jaber Abu Qudeiri, 2016. Tool part generation of contour parallel based on ant colony optimization, Jurnal Teknologi, 78: 31-36.
  46. A. Zakaria, S. Abdullah & M. J. Ghazali, 2016. A review of the loading sequence effects on the fatigue life behaviour of metallic materials, Journal of Engineering Science and Technology Review, 9: 189-200.
  47. Siba, W. Wanmahmood, M. Zaki Nuawi, R. Rasani, M. Nassir, 2016. Flow-induced vibration in pipes: challenges and solutions – a review, Journal of Engineering Science and Technology, 11: 362-382.
  48. Mohd Syazwan Solah, Baba Md Deros, Zulhaidi Mohd Jawi, Nur Zarifah Harun, Azhar Hamzah, Aqbal Hafeez Ariffin, 2016. The effects of mobile electronic device use in influencing pedestrian crossing behavior, Malaysian Journal of Public Health Medicine, 1 (S) 61-66.
  49. Zakaria Jusoh, Wan Mohd Faizal Wan Mahmood, Mohd Radzi Abu Mansor, 2016. Performance of solar-assisted absorption cycle air conditioning system, Jurnal Teknologi, 78: 121-126.
Translate »