Sains Malaysiana 38(3): 347-351(2009)

 

Kesan Hidroksipropil Metil Selulosa dan Jangkamasa Penggorengan

Terhadap Kehilangan Eugenol Semasa Penggorengan

(Effect of Hydroxypropyl Methyl Cellulose and Frying Period on the

Loss of Eugenol During Frying)

 

Lim Mei Fang:, Mohamad Yusof Maskat* & Wan Aida Wan Mustapha

Program Sains Makanan, Pusat Pengajian Sains Kimia dan Teknologi Makanan

Fakulti Sains dan Teknologi, Universiti Kebangsaan Malaysia

43600 Bangi, Selangor D.E.,Malaysia


Received: 1 March 2008 / Accepted: 25 July 2008

 

ABSTRAK

Kajian ini dijalankan untuk menentukan kesan hidroksipropil metil selulosa (HPMC) dan jangka masa penggorengan yang berbeza ke atas pemindahan eugenol dalam produk nuget ayam bersalut. Tiga kepekatan HPMC digunakan iaitu 0, 0.75 dan 1.5% serta tiga jangkamasa penggorengan iaitu 210, 240 dan 270 saat. Sampel nuget ayam ditambah 0.5% kandungan eugenol, disalut dengan kepekatan HPMC yang berbeza dan digoreng pada suhu 180˚C. Di akhir penggorengan selama 210, 240 dan 270 saat, kandungan eugenol bahagian salutan nuget meningkat secara signifikan (p<0.05) berbanding sebelum penggorengan. Untuk setiap jangkamasa penggorengan selama 0, 210 dan 240 s, tiada kesan penggunaan HPMC yang signifikan didapati ke atas kandungan eugenol dalam salutan. Tetapi penggorengan selama 270 saat, menunjukkan kandungan eugenol yang lebih tinggi dengan penggunaan HPMC. Peningkatan jangkamasa penggorengan menghasilkan penurunan kandungan eugenol dalam substrat pada setiap kepekatan HPMC. Manakala, peningkatan kepekatan HPMC menghasilkan peningkatan kandungan eugenol dalam substrat.

 

Kata kunci: Eugenol; hidroksipropil metil selulosa; jangkamasa penggorengan; nuget ayam; proses perpindahan

 

 

ABSTRACT

 

This study was conducted to determine the effects of hydroxypropylmethyl cellulose (HPMC) and different frying period on the migration of eugenol in coated fried nuggets. Three HPMC concentrations, 0, 0.75 and 1.5%, along with three frying periods of 210, 240 and 270 sec were used. Samples of chicken nuggets were added with 0.5% eugenol, coated with different HPMC concentration and fried at 180˚C. At the end of  210, 240 and 270 sec of frying, eugenol content in the coating increased significantly (p<0.05) compared to before frying. For each  frying period of 0, 210 and 240 s, no significant effect of using HPMC on eugenol content in the coating was found. However, frying for 270 s showed a higher eugenol content when HPMC was used. Increasing the frying period resulted in a decrease of eugenol content in the substrate for each HPMC concentration. Increased HPMC concentration resulted in an increased eugenol content in the substrate.

 

Keywords: Eugenol; chicken nuggets; frying period;  hidroxypropyl methyl cellulose; transfer process  

 

RUJUKAN

Blumenthal, M. 1991. A new Look at the Chemistry and Physics of Deep-fat Frying. Journal of Food Technology 45(2): 68-71, 94.

Dziezak, J.D. 1991. A Focus on Gums. Journal of Food Technology  45(3): 116–132.

Grover, J.A. 1986. Methyl cellulose (MC) and Hydroxypropyl Methyl Cellulose (HPMC). In Food Hydrocolloids. Edited by Glickman, M. 143-153. Boca Raton: CRC Press.

Hoefler, A.C. 2004. Hydrocolloids. America Association of Cereal Chemists, Inc. U.S.A: Eagan Press Handbook Series.

Mellema, M. 2003. Mechanism and Reduction of Fat Uptake in Deep-fat Fried Foods. Trends in Food Science & Technology. 14(9): 364-373.

Meyers, M.A. 1990. Functionallity of Hydrocolloids in Batter Coating System. In Batter and Breadings in Food Processing, Kulp, K. & Loewe, R. (pnyt). hlm. 117-142. St. Paul: American Association of Cereal Chemists, Inc.

Murano, P.S. 2003. Understanding Food Science and Technology. USA: Wadsworth, Thomson Learning, Inc.

Park, H.J., Chinnan, M.S. & Shewfelt R.L. 1995. Edible Coating Effects on Storage Life and Quality of Tomatoes. Journal of Food Science. 59(3): 568-570.

Parry, J.W. 1969. Spices Volume I. pp 160, 182-184. New York: Chemical Publishing  Company, Inc.

Pinthus, E.J., Weinberg, P. & Saguy, I.S. 1993. Criterion for Oil Uptake during Deep-Fat Frying. Journal of Food Science. 58(1): 204-205, 222.

Saguy, I.S. & Pinthus, E.J. 1995. Oil Uptake During Deep-fat-frying: Factors and Mechanism. Food Technology.  49: 142 145, 152.

SAS. 1996. User’s Guide. Release 6.03. Cary, NC: SAS Institute.

Sax, N.I. 1989. Dangerous Properties of Industrial Materials. 7th Ed. Vol. II. Hlm: 1696-1697. New York: Van Nostrand Reinhold. (atas talian). Http://ntp_server.niehs. Nih.gov/htdocs (20 Februari 2007).

Susheela, R.U. 2000. Handbook of Spices, Seasoning and Flavorings. hlm 40,92-95. Basel: Technomic Publishing Co.Inc .Lan Caster.

Varela, G. 1988. Current Facts About the Frying of Food. In. Frying of Food Principles, Changes, New Approaches, edited by Varela, G., Bender, A.E. & Morton, I.D. pp 9-25.  Great Britain: The Camelot Press.

Whistler, P.L., Bemiller, J.N. & Paschall, E.F. 1984. Starch Chemistry and Technology, 2nd ed. Orlando: Academic Press.

White, P.J. 1991. Methods for Measuring Changes in Deep-fat Frying Oils. Food Techology 45(2): 75-80.

 

*Corresponding author; email: yusofm@ukm.my

 

 

 

 

 

 

previous