Sains Malaysiana 40(7)(2011): 795–802

 

Optimization of Microencapsulation Process for Self-Healing

Polymeric Material

(Pengoptimuman Proses Mikro-pengkapsulan untuk Bahan Polimer Penyembuhan-Sendiri)

 

Sonja Then* & Gan Seng Neon

Department of Chemistry,Faculty of Science, University of Malaya

50603 Kuala Lumpur, Malaysia

 

Noor Hayaty Abu Kasim

Department of Conservative Dentistry, Faculty of Dentistry

University of Malaya, 50603 Kuala Lumpur, Malaysia

 

Diserahkan: 23 Oktober 2009 / Diterima: 28 Julai 2010

 

ABSTRACT

 

A series of poly(urea-formaldehyde) (PUF) microcapsules filled with dicyclopentadiene (DCPD) was successfully prepared by in situ polymerization. The effect of diverse process parameters and ingredients on the morphology of the microcapsules was observed by SEM, optical microscopy (OM) and digital microscopy. Different techniques for the characterization of the chemical structure and the core content were considered such as FT-IR and 1H-NMR as well as the characterization of thermal properties by DSC. High yields of free flowing powder of spherical microcapsules were produced. The synthesized microcapsules can be incorporated into another polymeric host material. In the event the host material cracks due to excessive stress or strong impact, the microcapsules would rupture to release the DCPD, which could polymerize to repair the crack.

 

Keywords: Microcapsules; micro-cracking; in situ polymerization; self-healing material

 

ABSTRAK

 

Siri mikrokapsul poliurea-formaldehid (PUF) yang mengandungi disiklopentadiena (DCPD) berjaya disediakan melalui proses pempolimeran in situ. Kesan kepelbagaian parameter proses dan bahan reaktan terhadap morfologi mikrokapsul telah diperhatikan melalui SEM, mikroskop optik (OM) dan mikroskop digital. Pelbagai kaedah seperti FT-IR dan 1H-NMR diguna untuk mencirikan struktur kimia serta kandungan teras mikrokapsul. Selain itu, sifat terma mikrokapsul juga dianalisis menggunakan DSC. Sfera mikrokapsul yang terhasil adalah dalam bentuk serbuk putih dengan peratus hasilan yang tinggi. Mikrokapsul ini boleh digabungkan ke dalam bahan polimer hos yang lain. Apabila bahan induk retak akibat tekanan yang berlebihan atau impak yang kuat, mikrokapsul akan pecah dan membebaskan DCPD untuk membaiki keretakan melalui proses pempolimeran.

 

Kata kunci: Bahan penyembuhan-sendiri; keretakan-mikro; mikrokapsul; pempolimeran in situ

 

 

RUJUKAN

 

Arshady, R. & Guyot, A. 2002. Functional Polymer Colloids and Microparticles: Microspheres, Microcapsules and Liposomes. London: Citus Books.

Benita, S. 1996. Microencapsulation: Methods and Industrial Applications. New York: Marcel Dekker.

Bond, I.P., Trask, R.S., Williams, G.J. & Williams, H.R. 2008. Self-healing functionality in fibre reinforced polymer composites. Materials Research Society Bulletin 33: 770-774.

Brown, E.N., Kessler, M.R., Sottos, N.R. & White, S.R. 2003. In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene. Journal of Microencapsulation 20: 719-730.

Christjanson, P., Pehk, T. & Siimer, K. 2006. Structure formation in urea-formaldehyde resin synthesis. Proceedings of the Estonian Academy of Sciences 55: 212-225.

Connor, A.H. 1996. In. Salamone, J.C. (ed.) Polymeric Materials Encyclopedia, 8496-8501. Boca Raton: Chemical Rubber Company Press.

Dry, C. 1996. Procedures developed for self-repair of polymer matrix composite materials. Composite Structures 35: 263-269.

Ghosh, S.K. 2006. Functional Coatings by Polymer Microencapsulation. Weinheim: Wiley-VCH.

Hong, K. & Park, S. 2000. Preparation of polyurea microcapsules containing ovalbumin. Materials Chemistry and Physics 64: 20-24.

Jyothi, N.V.N., Prasanna, P.M., Sakarkar, S.N., Prabha, K.S., Ramaiah, P.S. & Srawan, G.Y. 2010. Microencapsulation Techniques, Factors Influencing Encapsulation Efficiency. Journal of Microencapsulation 27: 187-197.

Li, V.C., Lim, Y.M. & Chan, Y.W. 1998. Feasibility study of a passive smart self-healing cementitious composite. Composites Part B Engineering 29: 819-827.

Ni, P., Zhang, M. & Yan, N. 1995. Effect of operating variables and monomers on the formation of polyurea microcapsules. Journal of Membrane Science 103: 51-55.

Ovez, B., Citak, B., Oztemel, D., Balbas, A., Peker, S. & Cakir, S. 1997. Variation of droplet sizes during the formation of microspheres from emulsions. Journal of Microencapsulation 14: 489-499.

Park, S.J., Shin, Y.S. & Lee, J.R. 2001. Preparation and characterization of microspheres containing lemon oil. Journal of Colloid and Interface Science 241: 502-508.

Pizzi, A. 1994. Advanced Wood Adhesives Technology. New York: Marcel Dekker.

Sliwka, W. 1975. Mikroverkapselung. Angewandte Chemie 87: 556-567.

Tan, H.S. Ng, T.H. & Mahabadi, H.K. 1991. Interfacial polymerization encapsulation of a viscous pigment mix–emulsification conditions and particle-size distribution. Journal of Microencapsulation 8: 525-536.

Thao, T.D.P., Johnson, T.J.S., Tong, Q.S. & Dai, P.S. 2009. Implementation of self-healing in concrete - proof of concept. The IES Journal Part A: Civil & Structural Engineering 2: 116-125.

Whateley, T.L. 1992. Microencapsulation of Drugs. Chur: Harwood Academic Publishers.

White, S.R., Sottos, N.R., Geubelle, P.H., Moore, J.S., Kessler, M.R., Sriram, S.R., Brown, E.N. & Viswanathan, S. 2001. Autonomic healing of polymer composites. Nature 409: 794-797.

Wijnendaele, K., Jaeger & F. Hägglund, S. 2010. Reduction of formaldehyde exposure in the woodworking industries. REF-Wood Social Partner Project. Available at: http://www.vhi.de/img/upload/VHI_Downloads/REF-Brosch%C3%BCre_deutsch_endg.pdf

Wool, R.P. 2001. A material fix. Nature 409: 773-774.

Wu, D.Y., Meure, S. & Solomon, D. 2008. Self-healing polymeric materials: a review of recent developments. Progress in Polymer Science 33: 479-522.

Yan, N., Ni, P. & Zang, M. 1993. Preparation and properties of polyurea microcapsules with non-ionic surfactant as emulsifier. Journal of Microencapsulation 10: 375-383.

Yuan, Y.C., Yin, T., Rong, M.Z. & Zhang, M.Q. 2008. Self healing in polymers and polymer composites. Concepts, realization and outlook: A review. Journal of Polymer Science Part C: Polymer Letters 2: 238-250.

 

*Pengarang untuk surat-menyurat; email: sonja@siswa.um.edu.my

 

 

 

sebelumnya