Penerbitan Akademik

Para penyelidik SERI telah menerbitkan dapatan penyelidikan mereka di dalam jurnal terindeks, prosiding persidangan dan buku di dalam dalam penerbitan kebangssan dan antarabangsa. Senarai penerbitan terkini bagi SERI telah dipaparkan pada pautan tersebut :

https://ukm.pure.elsevier.com/en/organisations/solar-energy-research-institute-seri/publications/

Penerbitan Jurnal 2019 

• Airborne particles in the city center of Kuala Lumpur: Origin, potential driving factors, and deposition flux in human respiratory airwaysKhan, M. F., Hamid, A. H., Bari, M. A., Tajudin, A. B. A., Latif, M. T., Nadzir, M. S. M., Sahani, M., Wahab, M. I. A., Yusup, Y., Maulud, K. N. A., Yusoff, M. F., Amin, N., Akhtaruzzaman, M., Kindzierski, W. & Kumar, P., 10 Feb 2019, In : Science of the Total Environment. 650, p. 1195-1206 12 p.

• A review of graphene based transparent conducting films for use in solar photovoltaic applicationsRosli, N. N., Ibrahim, M. A., Ahmad Ludin, N., Mat Teridi, M. A. & Sopian, K., 1 Jan 2019, In : Renewable and Sustainable Energy Reviews. 99, p. 83-99 17 p.

• Eliminating oxygen vacancies in SnO₂ films via aerosol-assisted chemical vapour deposition for perovskite solar cells and photoelectrochemical cells .Mohamad Noh, M. F., Arzaee, N. A., Safaei, J., Mohamed, N. A., Kim, H. P., Mohd Yusoff, A. R., Jang, J. & Mat Teridi, M. A., 30 Jan 2019, In : Journal of Alloys and Compounds. 773, p. 997-1008 12 p.

Penerbitan Jurnal 2018 

• A comparative study on thermally and laser annealed copper and silver doped CdTe thin film solar cells. Aris, K. A., Rahman, K. S., Ali, A. M., Bais, B., Yahya, I. B., Akhtaruzzaman, M., Misran, H., Abdullah, S. F., Alghoul, M. A. & Amin, N., 1 Oct 2018, In : Solar Energy. 173, p. 1-6 6 p.

• Adsorbent materials based on a geopolymer paste for dye removal from aqueous solutions. Maleki, A., Emdadi, Z., Azizi, M., Mohammad, M., Asim, N. & Safaei, J., 1 Jan 2018, (Accepted/In press) In : Arabian Journal of Chemistry.

• Adsorption Isotherm of Chromium (VI) into Zncl₂Impregnated Activated Carbon Derived by Jatropha Curcas Seed Hull. Mohammad, M., Yakub, I., Yaakob, Z., Asim, N. & Sopian, K., 5 Jan 2018, In : IOP Conference Series: Materials Science and Engineering. 293, 1, 012013.

• Adsorption of Copper Ion using Acrylic Acid-g-Polyaniline in Aqueous Solution. Kamarudin, S. & Mohammad, M., 11 Apr 2018, In : IOP Conference Series: Earth and Environmental Science. 140, 1, 012022.

• Algae and their growth requirements for bioenergy: a review. Najiha Badar, S., Mohammad, M., Emdadi, Z. & Yaakob, Z., 1 Jun 2018, (Accepted/In press) In : Biofuels. p. 1-19 19 p.

• A low cost and single source atmospheric pressure vapor phase epitaxy of ZnS for thin film photovoltaic applications. Yusoff, Y., Chelvanathan, P., Kamaruddin, N., Akhtaruzzaman, M. & Amin, N., 15 Jun 2018, In : Materials Letters. 221, p. 216-219 4 p.

• A Mini Review: Can Graphene Be a Novel Material for Perovskite Solar Cell Applications?. Lim, E. L., Yap, C. C., Jumali, M. H. H., Teridi, M. A. M. & Teh, C. H., 1 Jun 2018, In : Nano-Micro Letters. 10, 2, 27.

• Analysis of motor speed three phase induction using Harriot and Smith method. Faizal, A., Harman, Yendra, R. & Fudholi, A., 1 Jan 2018, In : Journal of Engineering and Applied Sciences. 13, 13, p. 4971-4975 5 p. 

• Analysis of the effect of an installation of a single tuned passive filter on harmonics and distribution transformers. Aini, Z., Ahnur, Z., Setiawan, D. & Fudholi, A., 1 Sep 2018, In : International Journal of Power Electronics and Drive Systems. 9, 3, p. 1285-1294 10 p.

• A novel waveguide design that produces an elongated laser beam output for soft tissue ablation. Jaafar, N. S. A., Sepeai, S., Lim, K. S., Zaini, M. K. A., Ahmad, H. & Tan, G. H., 1 Jul 2018, In : Optik. 164, p. 561-566 6 p.

• An overview on prospects of new generation single-phase transformerless inverters for grid-connected photovoltaic (PV) systems. Shayestegan, M., Shakeri, M., Abunima, H., Reza, S. M. S., Akhtaruzzaman, M., Bais, B., Mat, S., Sopian, K. & Amin, N., 1 Feb 2018, In : Renewable and Sustainable Energy Reviews. 82, p. 515-530 16 p. 

• A Phenomenological Model of the Screen-Printed, Silver Paste Contact to Si Substrate. Ahmad, S. M., Leong, C. S., Winder, R. W., Sopian, K. & Zaidi, S. H., 1 Nov 2018, In : Journal of Electronic Materials. 47, 11, p. 6791-6810 20 p.

• A primary study of tracking photovoltaic system for mobile station in Malaysia. Fudholi, A., Haw, L. C. & Sopian, K., 1 Mar 2018, In : International Journal of Power Electronics and Drive Systems. 9, 1, p. 427-432 6 p.

• A review of thermoelectric power generation systems: Roles of existing test rigs/ prototypes and their associated cooling units on output performance. Alghoul, M. A., Shahahmadi, S. A., Yeganeh, B., Asim, N., Elbreki, A. M., Sopian, K., Tiong, S. K. & Amin, N., 15 Oct 2018, In : Energy Conversion and Management. 174, p. 138-156 19 p.

• Bivariate probability model for wind power density analysis: Case study. Sanusi, N., Zaharim, A., Mat, S. & Sopian, K., 1 Jan 2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 2, p. 656-659 4 p. 

• CFD simulation of temperature and air flow distribution inside industrial scale solar dryer. Noh, A. M., Mat, S. & Ruslan, M. H., 1 May 2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 45, 1, p. 156-164 9 p.

• Characterization of an asphalt concrete binder course mixture using asbuton granular asphalt. Gaus, A., Tjaronge, M. W., Suyono, T. & Fudholi, A., 1 Jan 2018, In : Journal of Engineering and Applied Sciences. 13, 14, p. 5942-5946 5 p.

• Characterization of novel nitrogen-less derived 2D hybrid perovskite of C₆H₈N₂PbBr₃as a light-harvesting material for perovskite solar cell application. Ramli, A., Bakar, M. N. A., Osman, N., Ismail, W. I. N. W. & Sepeai, S., 15 Sep 2018, In : Materials Letters. 227, p. 62-65 4 p.

• Characterization of several microcrystalline cellulose (Mcc)-based agricultural wastes via x-ray diffraction method. Sainorudin, M. H., Mohammad, M., Kadir, N. H. A., Abdullah, N. A. & Yaakob, Z., 1 Jan 2018, Sustainable Materials.Omar, M. F., Salleh, M. A. A. M., Che Halin, D. S., Abdullah, M. M. A-B., Zainal, F. F., Cheng-Yong, H., Yun-Ming, L., Ahmad, K. R., Abdullah, M. M. A-B. & Bakar, S. S. S. (eds.). Trans Tech Publications Ltd, p. 340-345 6 p. (Solid State Phenomena; vol. 280 SSP).

• Compact planar UWB antenna with 3.5/5.8 GHz dual band-notched characteristics for IoT application. Hassan, S. A., Samsuzzaman, M., Hossain, M. J., Akhtaruzzaman, M. & Islam, T., 7 Feb 2018, 2nd IEEE International Conference on Telecommunications and Photonics, ICTP 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-December. p. 195-199 5 p.

• Comparison of Activated Carbon and Physic Seed Hull for the Removal of Malachite Green Dye from Aqueous Solution. Mohammad, M., Maitra, S. & Dutta, B. K., 1 Feb 2018, In : Water, Air, and Soil Pollution. 229, 2, 45.

• Comparison of prediction methods of PV/T nanofluid and nano-PCM system using a measured dataset and artificial neural network. Al-Waeli, A. H. A., Sopian, K., Kazem, H. A., Yousif, J. H., Chaichan, M. T., Ibrahim, A., Mat, S. & Ruslan, M. H., 1 Mar 2018, In : Solar Energy. 162, p. 378-396 19 p.

• Comparison of Thermal Performances between Low Porosity Perforate Plate and Flat Plate Solar Air Collector. Chan, H. Y., Vinson, A. A., Baljit, S. S. S. & Ruslan, M. H., 11 Apr 2018, In : Journal of Physics: Conference Series. 989, 1, 012001.

• Comparison of univariate and bivariate parametric model for wind energy analysis. Sanusi, N., Zaharim, A., Mat, S. & Sopian, K., 1 Sep 2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 49, 1, p. 1-10 10 p.

• Comparison study of indoor/outdoor experiments of a photovoltaic thermal PV/T system containing SiC nanofluid as a coolant. Al-Waeli, A. H. A., Chaichan, M. T., Kazem, H. A., Sopian, K., Ibrahim, A., Mat, S. & Ruslan, M. H., 15 May 2018, In : Energy. 151, p. 33-44 12 p.

• Deposition and characterization of RF-sputtered-Ta₂O₅thin films for O₂ reduction reaction in polymer electrolyte membrane fuel cells (PEMFC). Samsudin, N., Ferdaous, M. T., Shahahmadi, S. A., Mustafa, S. N., Akhtaruzzaman, M., Sopian, K., Chelvanathan, P. & Amin, N., 1 Oct 2018, In : Optik. 170, p. 295-303 9 p.

• Effect of Film Thickness on Photoelectrochemical Performance of SnO₂Prepared via AACVD. Mohamad Noh, M. F., Soh, M. F., Riza, M. A., Safaei, J., Mohd Nasir, S. N. F., Mohamad Sapian, N. W., Teh, C. H., Ibrahim, M. A., Ahmad Ludin, N. & Mat Teridi, M. A., 1 Jan 2018, (Accepted/In press) In : Physica Status Solidi (B) Basic Research.

• Effect of laser annealing on thermally evaporated CdTe thin films for photovoltaic absorber application. Khan, N. A., Rahman, K. S., Aris, K. A., Ali, A. M., Misran, H., Akhtaruzzaman, M., Tiong, S. K. & Amin, N., 1 Oct 2018, In : Solar Energy. 173, p. 1051-1057 7 p.

• Electrodeposition of organic–inorganic tri-halide perovskites solar cell. Charles, U. A., Ibrahim, M. A. & Teridi, M. A. M., 28 Feb 2018, In : Journal of Power Sources. 378, p. 717-731 15 p. 

• Energy and exergy analyses of photovoltaic thermal collector with ∇-groove. Fudholi, A., Zohri, M., Jin, G. L., Ibrahim, A., Yen, C. H., Othman, M. Y., Ruslan, M. H. & Sopian, K., 1 Jan 2018, In : Solar Energy. 159, p. 742-750 9 p.

• Energy economic analysis of photovoltaic–thermal-thermoelectric (PVT-TE) air collectors. Nazri, N. S., Fudholi, A., Bakhtyar, B., Yen, C. H., Ibrahim, A., Ruslan, M. H., Mat, S. & Sopian, K., 1 Sep 2018, In : Renewable and Sustainable Energy Reviews. 92, p. 187-197 11 p.

• Energy sector in Malaysia: How sustainable are we? Chan, H. Y., 1 Jan 2018, Green Energy and Technology. Springer Verlag, p. 25-40 16 p. (Green Energy and Technology; vol. Part F9).

• Enhanced photocatalytic performance of ZnSe/PANI nanocomposites for degradation of organic and inorganic pollutants. Shirmardi, A., Mat Teridi, M. A., Azimi, H. R., Basirun, W. J., Jamali-Sheini, F. & Yousefi, R., 31 Dec 2018, In : Applied Surface Science. 462, p. 730-738 9 p.

• Enhanced photoelectrochemical performance of Z-scheme g-C₃N₄/BiVO₄photocatalyst. Safaei, J., Ullah, H., Mohamed, N. A., Mohamad Noh, M. F., Soh, M. F., Tahir, A. A., Ahmad Ludin, N., Ibrahim, M. A., Wan Isahak, W. N. R. & Mat Teridi, M. A., 6 Oct 2018, In : Applied Catalysis B: Environmental. 234, p. 296-310 15 p.

• Enhancement of plasticizing effect on bio-based polyurethane acrylate solid polymer electrolyte and its properties. Naiwi, T. S. R., Aung, M. M., Ahmad, A., Rayung, M., Su’ait, M. S., Yusof, N. A. & Lae, K. Z. W., 12 Oct 2018, In : Polymers.10, 10, 1142.

• Exergy and energy analysis of photovoltaic thermal (Pvt)with and without fins collector. Zohri, M., Hadisaputra, S. & Fudholi, A., 1 Feb 2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 3, p. 803-808 6 p.

• Exergy assessment of photovoltaic thermal with v-groove collector using theoretical study. Zohri, M., Nurato, Bakti, L. D. & Fudholi, A., 1 Apr 2018, In : Telkomnika (Telecommunication Computing Electronics and Control). 16, 2, p. 550-557 8 p. 

• Experimental and numerical study of solidifying phase-change material in a triplex-tube heat exchanger with longitudinal/triangular fins. Abdulateef, A. M., Abdulateef, J., Mat, S., Sopian, K., Elhub, B. & Mussa, M. A., 1 Jan 2018, In : International Communications in Heat and Mass Transfer. 90, p. 73-84 12 p.

• Experimental development to determine time constant for polymer collector. Rosli, M. A. M., Mat, S., Sopian, K., Salleh, E. & Sharif, M. K. A., 1 Feb 2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 4, p. 1523-1527 5 p.

• Experimental study of photovoltaic thermal-thermoelectric (PVT-TE) air collector. Nazri, N. S., Fudholi, A., Ruslan, M. H. & Sopian, K., 1 Sep 2018, In : International Journal of Power Electronics and Drive Systems. 9, 3, p. 1390-1396 7 p.

• Fabrication techniques and morphological analysis of perovskite absorber layer for high-efficiency perovskite solar cell: A review. Jamal, M. S., Bashar, M. S., Hasan, A. K. M., Almutairi, Z. A., Alharbi, H. F., Alharthi, N. H., Karim, M. R., Misran, H., Amin, N., Sopian, K. B. & Akhtaruzzaman, M., 1 Dec 2018, In : Renewable and Sustainable Energy Reviews. 98, p. 469-48820 p.

• Facile fabrication of graphitic carbon nitride, (g-C₃N₄) thin film. Safaei, J., Mohamed, N. A., Noh, M. F. M., Soh, M. F., Riza, M. A., Mustakim, N. S. M., Ludin, N. A., Ibrahim, M. A., Isahak, W. N. R. W. & Teridi, M. A. M., 15 Nov 2018, In : Journal of Alloys and Compounds. 769, p. 130-135 6 p.

• Growth optimization of Zn_xCd_1-xS films on ITO and FTO coated glass for alternative buffer application in CdTe thin film solar cells. Hossain, M. S., Rahman, K. S., Islam, M. A., Akhtaruzzaman, M., Misran, H., Alghoul, M. A. & Amin, N., 1 Dec 2018, In : Optical Materials. 86, p. 270-277 8 p.

• High-efficiency, solution-processable, multilayer triple cation perovskite light-emitting diodes with copper sulfide–gallium–tin oxide hole transport layer and aluminum-zinc oxide–doped cesium electron injection layer. Yusoff, A. R. B. M., Gavim, A. E. X., Macedo, A. G., da Silva, W. J., Schneider, F. K. & Mat Teridi, M. A., 1 Dec 2018, In : Materials Today Chemistry. 10, p. 104-111 8 p.

• Homogenization Effect on Nanostructure and Conductivity of Polyaniline Nanofibre Synthesis by Mini-Emulsion Polymerization Technique. Mohammad, M., Kamarudin, S., Mohamed, N. H., Asim, N. & Sopian, K., 5 Jan 2018, In : IOP Conference Series: Materials Science and Engineering. 293, 1, 012012.

• Implementation of a novel home energy management system (HEMS) architecture with solar photovoltaic system as supplementary source. Shakeri, M., Shayestegan, M., Reza, S. M. S., Yahya, I., Bais, B., Akhtaruzzaman, M., Sopian, K. & Amin, N., 1 Sep 2018, In : Renewable Energy. 125, p. 108-120 13

• Interplay between variable direct current sputtering deposition process parameters and properties of ZnO: Ga thin films. Ferdaous, M. T., Shahahmadi, S. A., Sapeli, M. M. I., Chelvanathan, P., Akhtaruzzaman, M., Tiong, S. K. & Amin, N., 30 Aug 2018, In : Thin Solid Films. 660, p. 538-545 8 p.