Institute of Microengineering and Nanoelectronics

 Institute of Microengineering and Nanoelectronics

Publication in Journal (Impact)

MEMS & Nanoelectronics Group

  1. Yunas, J., Hamzah, A.A. and Majlis, B.Y., 2009. Fabrication and characterization of surface micromachined stacked transformer on glass substrate. Microelectronic Engineering 86 (10), pp. 2020-2025.
  2. Dee, C.F., Lee, J.D., Sow, C.H., Majlis, B.Y., Hamzah, A., Abdullah, H. and Lee, S.K., 2009. Simulation for deposition of ZnO thin film layer by kinetic Monte Carlo method. Materials Research Innovations 13 (3), pp. 135-138.
  3. Ganji, B. A. and Majlis, B.Y., 2009. High sensitivity and small size MEMS capacitive microphone using a novel slotted diaphragm. Microsystem Technologies 15 (9), pp. 1401-1406.
  4. Tiong, T. Y., Yahaya, M., Dee, C. F., Lim, K.P., Majlis, B.Y. and Sow, C.H., 2009. Influence of growth temperature on SnO2 nanowires. Materials Research Innovations 13 (3), pp. 203-206.
  5. Karamdel, J., Ahmadi, M.T., Damghanian, M. and Majlis, B. Y., Dee, C. F., Ismail, R., 2009. Analysis and simulation of carriers statistic for semiconducting single wall carbon nanotube. Materials Research Innovations 13(3), pp. 211-213.
  6. Ganji, B. A. and  Majlis, B.Y., 2009. Fabrication and characterization of a new mems capacitive microphone using perforated diaphragm. International Journal of Engineering, Transactions B: Applications 22 (2), pp. 153-160.
  7. Damghanian, M. and Majlis, B.Y., 2009. Analysis and design of a wide micro beam as a pressure gauge for high sensitivity MEMS fingerprint sensors. Microsystem Technologies 15 (5), pp. 731-737.
  8. Tehranirokh, M., Majlis, B.Y. and Bais, B., 2009. Design and simulation of a normally closed glucose sensitive hydrogel based microvalve. Microsystem Technologies 15 (5), pp. 753-762.
  9. Ganji, B.A. and Majlis, B.Y., 2009. Design and fabrication of a novel single-chip MEMS capacitive microphone using slotted diaphragm. Journal of Micro/Nanolithography, MEMS, and MOEMS 8 (2), art. No. 021112.
  10. Yunas, J., Hamzah, A.A. and Majlis, B.Y., 2009. Surface micromachined on-chip transformer fabricated on glass substrate. Microsystem Technologies 15 (4), pp. 547-552.
  11. Ganji, B.A. and Majlis, B.Y., 2009. Design and fabrication of a new MEMS capacitive microphone using a perforated aluminium diaphragm. Sensors and Actuators, A: Physical 149 (1), pp. 29-37.
  12. Mitra Damghanian and Burhanuddin Yeop Majlis, 2009. Novel design and fabrication of high sensitivity MEMS capacitive sensor array for fingerprint imaging. Journal of Advanced Materials Research Vol. 74 (2009), pp 239-242.
  13. Muhamad Ramdzan Buyong, Norazreen Abd Aziz and Burhanuddin Yeop Majlis, 2009. Characterization and optimization of seals-off for Very Low pressure sensors (VLPS) fabricated by CMOS MEMS process. Journal of Advanced Materials Research Vol. 74 (2009), pp 231-234.
  14. Fatimah Lina Ayatollahi and Burhanuddin Yeop Majlis, 2009. Materials design and analysis of low-power MEMS microspeaker using magnetic actuation technology. Advanced Materials Research 74:243-246.
  15. Rosminazuin Ab. Rahim, Badariah Bais, Burhanuddin Yeop Majlis, Hybrid Simulation Approach on MEMS Piezoresistive Microcantilever Sensor for Biosensing Applications, Advanced Materials Research Vol. 74 (2009) pp 283-286.
  16. Norazreen Abd Aziz, Muhamad Ramdzan, Burhanuddin Yeop Majlis,  Process characterization of wet etching for high aspect ratio microneedles development,  Advanced Materials Research Vol. 74 (2009) pp 341-344.
  17. N. A. Dzulkefli, B. bais and B. Y. Majlis, Fabrication of Glucose Sensitive Actuator for DDS Micro valve, Advanced Materials Research Vol. 74 (2009) pp 287-290.
  18. Gebeshuber I.C., Stachelberger H., Ganji B.A., Fu D.C., Yunas J. and Majlis B.Y. Exploring the innovational potential of biomimetics for novel 3D MEMS”, Adv. Mat. Res. 74:  265-268, doi:10.4028/www.scientific.net/AMR.74.265.
  19. Tiong T.Y., Yahaya M., Dee C.F., Lim K.P., Majlis B.Y., Sow C.H. Influence of growth temperature on SnO2 nanowires. Materials Research Innovations Vol.  13 Issue 3 (1.230).
  20. Srajer J., Majlis B.Y. and Gebeshuber I.C. Microfluidic simulation of a colonial diatom chain reveals oscillatory movement. Acta Bot. Croat. 68(2): 431-441.
  21. Hashim, U; Fatah, MFAA; Ahmad, I & Majlis, BY. 2009. Statistical Design of Ultra-Thin SiO2 for Nanodevices. Sains Malaysiana 38(4):553-557.
  22. Ganji B.A. & Majlis B.Y. 2009. Design and fabrication of a novel single-chip MEMS capacitive microphone using slotted diaphragm. Journal of Micro-Nanolithography, MEMS and MOEMS 8(2): art. no. 021112.
  23. Bahram Azizollah Ganji & Burhanuddin Yeop Majlis. 2009. Fabrication of deep trenches in silicon wafer using deep reactive ion etching with aluminum mask. Sains Malaysiana 38(6): 889-894.
  24. Tomala A., Werner W.S.M., Gebeshuber I.C., Doerr N. &  Stoeri H. 2009. Tribochemistry of monomolecular lubricant films of ethanolamine oligomers. Tribology International 42(10): 1513-1518.
  25. Gebeshuber I.C., Gruber P. and Drack M. 2009. A gaze into the crystal ball – biomimetics in the year 2059. Proc. IMechE Part C: J. Mech. Eng. Sci. 50st Anniversary Issue, pp. 2899.
  26. Tomala A., Werner W.S.M., Gebeshuber I.C., Doerr N. and Stoeri H. 2009. Tribochemistry of monomolecular lubricant films of ethanolamine oligomers. Tribology International 42(10): 1513-1518.
  27. Zika T., Gebeshuber I.C., Buschbeck F., Preisinger G. & Groeschl M. 2009. Surface analysis on rolling  bearings after exposure to defined electric stress. Proc.  IMechE,  Part  J: J.Engineering Tribology, 223(J5) :787-797.
  28. Gebeshuber I.C., Holzer D., Goschke R., Aumayr F. and Stoeri H. 2009. Development of an atomic force microscope closed fluid cell for tribological investigations of large samples in chemically aggressive environments. Proc. IMechE, Part J: J. Engineering Tribology. 223(J5): 759-765.
  29. Fatimah Lina Ayatollahi & Burhanuddin Yeop Majlis. 2009. Materials Design and Analysis of Low-Power MEMS Microspeaker Using Magnetic Actuation Technology. NEMS/MEMS Technology and Devices: Advanced Materials Research 74: 243-246.
  30. Norazreen Abd Aziz, Muhamad Ramdzan Buyong & Burhanuddin Yeop Majlis. 2009. Process Characterization of Wet Etching for High Aspect Ratio Microneedles Development. Advanced Materials Research 74: 341-344.
  31. Muhamad Ramdzan Buyong, Norazreen Abd Aziz & Burhanuddin Yeop Majlis. 2009.Characterization and Optimization of Seals-Off for Very Low Pressure Sensors (VLPS) Fabricated by CMOS MEMS Process. Advanced Materials Research 74: 231-234

Photonics and Nanophotonics Technology Group

  1. P. S. Menon, K. Kandiah, A. A. Ehsan & S. Shaari, 2009. The development of a new responsivity prediction model for In(0.53)Ga(0.47)As interdigitated lateral PIN photodiode. Journal of Optical Communications 30(2): 2-6.
  2. Abang Annuar Ehsan, Sahbudin Shaari, and Mohd Kamil Abd Rahman, “1×2 y-branch plastic optical fiber waveguide coupler for optical access-card system,” Progress In Electromagnetics Research, PIER 91, pp. 85-100, 2009.
  3. Abang Annuar Ehsan, Sahbudin Shaari and Mohd Kamil Abd. Rahman, 2009. Low Cost 1 X 2 Acrylic-based Plastic Optical Fiber Coupler with Hollow Taper Waveguide. PIERS ONLINE  5(2): 129-132
  4. T. Eltaif, H. M. H. Shalaby, S. Shaari, and M. M. N. Hamarsheh, “Performance enhancement of successive interference cancellation scheme based on spectral amplitude coding for optical code-division multiple-access systems using Hadamard codes,” SPIE Opt. Eng., vol. 48(4), pp. 045002(1-7), Apr. 2009.
  5. T. Eltaif, H. M. H. Shalaby, S. Shaari, and M. M. N. Hamarsheh, 2009. Performance analysis of a hybrid fiber Bragg grating-based spectral-amplitude-coding/successive interference cancellation for optical CDMA systems,” Opt. Commun., vol. 282(1), pp. 1-6, Jan. 2009.
  6. Mohd Sharizal Alias, Sahbudin Shaari, P. K. Choudhury, and Sufian Mitani, 2009. Improved efficiency of GaAs-based VCSEL by utilizing fan-pad metallization and trench patterning”, Laser Physics vol. 19(11), pg. 2096-2101.
  7. Mohd Sharizal Alias, Sahbudin Shaari, P. K. Choudhury, and Sufian Mitani, 2009. Comprehensive uniformity analysis of GaAs-based VCSEL epiwafer by utilizing the on-wafer test capability,” Journal of Russian Laser Research, vol. 30(4), pg. 368-375.
  8. T Eltaif, H M H Shalaby, S Shaari, & M. M. N. Hamarsheh, 2009. Successive Interference Cancellation for Optical CDMA Systems: Fundamental Principles,” WSEAS Transactions on Communications. Vol. 8(7), pp. 668-677.
  9. Ehsan, A.A., Shaari, S., Rahman, M.K.A., Abidin, K.M.R.K.Z, 2009. Hollow optical waveguide coupler for portable access card system application  Journal of Optical Communications 30 (2), pp. 67-73
  10. Fuad A. Hatim, Feras N. Hasoon and S. Shaari, 2009. Effects of Nonlinear Stimulated Brillouin Scattering on Performance Analysis of an Optical CDMA Transmission System. Journal of Optical Communications 30(2), pp. 104-108.
  11. Hesham A. Bakarman, Sahbudin Shaari, and Mahamod Ismail, Security Performance of Spectral Amplitude Code OCDMA: a Spectrally Encoded Pulse Bandwidth Effects. Journal of Optical Communications 30(4): 242-247
  12. Bakar, A.A.A., Mahdi, M.A., Al-Mansoori, M.H., Shaari, S., Zamzuri, A.K, 2009. Single-stage gain-clamped L-band EDFA with C-band ASE saturating tone. Laser Physics 19 (5), pp. 1026-1029.
  13. Bakar, A.A.A., Mahdi, M.A., Al-Mansoori, M.H., Shaari, S., Zamzuri, A.K, 2009. Opto-optical gain-clamped L-band erbium-doped fiber amplifier with C-band control signal. Applied Optics 48 (12), pp. 2340-2343.
  14. H.Abdullah, M.N.Norazia, S.Shaari, A.Amir Khadum, 2009. Effect of heat treatment on the structural, morphological and optical properties of tin-Doped ZnO (x=0.0 and x=0.05) thin films Defect and Diffusion Forum 293: 53-61
  15. Ali Z. Ghazi Zahid, Feras N. Hasoon, Sahbudin Shaari, 2009. New Algorithm for Enhanced Double Weight (EDW) Code for Spectral Amplitude Coding.  Journal of Optical Communications 30(3): 206-210
  16. A. A. Ehsan and S. Shaari, 2010. Metal-based 1×2 and 1×4 asymmetric plastic optical fiber couplers for optical code generating devices. Progress In Electromagnetics Research, PIER 101: 1-16
  17. Mohd Sharizal Alias, Sahbudin Shaari, Paul O. Leisher, and Kent D. Choquette, 2010.  Single transverse mode control of oxide VCSEL by photonic crystal and trench patterning. Photonics and Nanostructures: Fundamentals and Applications
  18. M. S. Alias, S. Shaari, and S. M. Mitani, 2010. Optimization of electro-optical characteristics of GaAs-based oxide confinement VCSEL.  Laser Physics 20(4): 1-5

Microelectronic Semiconductor Packaging Group

  1. S.Abdullah, M.F.Abdullah & A.K.Ariffin, 2009, Thermal-Mechanical Analysis of a Different Leadframe Thickness of Semiconductor Package under the Reflow Process Americal Journal of Applied Sciences. Vol 6 (4): 616-625
  2. S. Abdullah, M.F. Abdullah, A.K. Ariffin and A. Jalar, 2009, Effect of Leadframe Oxidation on the Reliability of a Quad Flat No-Lead Package, Journal of Electronic Packaging 131: 031002-1 – 031002-7.
  3. M.F. Rosle, I. Abdullah, S. Abdullah, M.A.A. Hamid, A.R. Daud and A. Jalar. 2009. Effect of Manufacturing Stresses to Die Attach Film Performance in Quad Flatpack No-Lead Stacked Die Packages. American Journal of Engineering and Applied Sciences, Vol. 2 : 17-24
  4. Nowshad Amin, Lim, V., Foong, Chee Seng, Rozaidi Razid & Ibrahim Ahmad. 2009. A practical investigation on nickel plated copper heat spreader with different catalytic activation processes for flip-chip ball grid array packages. Microelectronics Reliability 49: 537-543.
  5. N. Saud and A.Jalar. 2009.  Sn-Rich phase coarsening during isothermal annealing for as-soldered Sn-Ag-Cu solders, J Mater Sci: Mater Electron, DOI 10.1007/s10854-009-0032-z (Online)
  6. Zainudin Kornain, Azman Jalar, Rozaidi Rasid and Fong Chee Seng. 2009. Effect of Curing Profile to Eliminate the Voids / Black Dots Formation in Underfill Epoxy for Hi-CTE Flip Chip Packaging. Journal of World Academy Science, Engineering and Technology, Vol 59 : 374-379
  7. Norliza Ismail, Muhammad Azmi Abdul Hamid & Azman Jalar. 2009. Microstructural Characterization of Au-In Thin Film Deposited by Electron Beam Evaporation. Sains Malaysiana vol 38(1) pp 91 – 94
  8. Siti Nurul Fatimah Hasim, Muhammad Azmi Abdul Hamid, Roslinda Shamsudin, Azman Jalar. 2009. Synthesis and Characterization of ZnO Thin Films by Thermal Evaporation. Journal of Physics and Chemistry of Solids 70 (2009). pp. 1501-1504
  9. D.S. Che Halin, I. A. Talib, A. R. Daud & M. A. A. Hamid. 2009. Physical Properties Of Cuprous Oxide Thin Films Grown On N-Si Substrate By Sol-Gel Spin Coating, Sains Malaysiana, 38(2): 215–218

Organic and Printed Electronics Group

  1. Umar A.A., Oyama M., Salleh M.M., Majlis B.Y. Formation of high-yield gold nanoplates on the surface: Effective two-dimensional crystal growth of nanoseed in the presence of poly(vinylpyrrolidone) and cetyltrimethylammonium bromide. Crystal Growth and Design Vol.9 Issue 6 (4.046).
  2. M. Y. A. Rahman, A. Ahmad, L. H. C. Ismail, M. M. Salleh. 2009 Fabrication and Characterization of a Solid Polymeric Electrolyte of PAN-TiO2-LiCIO4 .Journal of Applied Polymer Science Vol 115,2144-2148
  3. Rika, Ahmad A., Rahman M.Y.A., Salleh M.M. 2009. Preparation and characterization of PAN based solid polymeric electrolyte for dye-sensitized solar cells. Physica B: Condensed Matter, 404(8-11): 1359-1361.
  4. Rika, Rahman M.Y.A., Salleh M.M., Umar A.A., Ahmad A. 2009. Synthesis and characterization of TiO2 nanoparticle films coated with organic dyes. Physica B: Condensed Matter, 404(8-11): 1420-1422.
  5. Rajendra N.G., Akrajas, A., Oyama, M.2009. Comparison of spherical nanogold particles and nanogold plates for the oxidation of dopamine and ascorbic acid. J. Electroanalytical Chemistry 631: 58-61
  6. Sepeai S., Salleh M.M., Yahaya M., Umar A.A. 2009. Improvement of white organic light emitting diode performances by an annealing process. Thin Solid Films, 517(16): 4679-4683.
  7. Supriyanto, A., Triyana, K., Roto, Kusminarto, Salleh, M.M., Umar, A.A. 2009. Fabrication and performance studies of TiO2 and porphyrin heterojunction based organic photodetector. J. Optoelectronics & Advance Material. ISSN: 1454-4164
  8. Tengku Hasnan Tengku Aziz, Muhamad Mat Salleh and Muhammad Yahaya, 2009. Enhanced Performance of Organic Light Emitting Devices Using Nanocomposite SiO2:PHF as an Emitting Layer. Solid State Science and Technology, 17(1):104-109. (Diindeks dalam Chemical Abstrak)
  9. Umar A.A., Oyama M., Salleh M.M., Majlis B.Y. 2009. Formation of high yield gold nanoplates on the surface.Crystal Growth and Design, 9(6): 2835-2840.
  10. Umar A.A., Oyama M. 2009. High-yield synthesis of tetrahedral-like gold nanotripods using an aqueous binary mixture of cetyltrimethylammonium bromide and hexamethylenetetramine. Cryst. Growth Des 9(2): 1146-1152
  11. Yap C.C., Yahaya M., Salleh M.M. 2009. Influence of tetrabutylammonium hexafluorophosphate (TBAPF6) doping level on the performance of organic light emitting diodes based on PVK:PBD blend films. Current Applied Physics, 9(5): 722-726.
  12. Yap C.C., Yahaya M., Salleh M.M. 2009. The effect of DCJTB concentration on the photoluminescent and electroluminescent properties of PVK-PBD-perylene-DCJTB thin films. Materials Science- Poland, 27(1): 209-218.
  13. Yap C.C., Yahaya M., Salleh M.M. 2009. The effect of driving voltage on the electroluminescent property of a blend of poly(9-vinylcarbazole) and 2-(4-biphenylyl)-5-phenyl-1,3,4-oxadiazole. Current Applied Physics, 9(5): 1038-1041.
  14. Abdullah, H. , Habibi Saadah, N.O.R. , Ariyanto, N. , Muhamad Salleh, M.A.T.   Low-doping effect on nanostructured ZnO:Al as anti-reflecting coating [Kesan pengedopan rendah ke atas bahan nanostruktur ZnO: Al sebagai lapisan anti-pantulan]. 2009. Sains Malaysiana Volume 38, Issue 5, October 2009, Pages 679-683
  15. Ramli, N. , Muhamad Salleh, M.A.T. , Yahaya, M. , Jumalli, M.H.H.J.   Effect of ZrO2 addition on microstructure, morphology and pressure sensing behaviour of Pb(Zrx Ti1-x)O3 ceramics sintered in Al2O3 environment. 2009. Sains Malaysiana Volume 38, Issue 5, October 2009, Pages 685-691.
  16. Abdullah, H. , Rini, A.S. , Ya, M.Z. , Yarmo, M.A. Structural and morphological studies of TiO2 films for dye-sensitized solar cell applications.2009. Diffusion and Defect Data. Pt A Defect and Diffusion Forum Volume 293, 2009, Pages 63-66
  17. Dee, C.F., Lee, J.D. , Sow, C.H. , Majlis, B.Y. , Hamzah, A. , Abdullah, H. , Lee, S.-K.  Simulation for deposition of ZnO thin film layer by kinetic Monte Carlo method.  2009. Materials Research Innovations,  Volume 13, Issue 3, September 2009, Pages 135-138
  18. Tiong, T.Y. , Yahaya, M. , Dee, C.F. , Lim, K.P. , Majlis, B.Y. , Sow, C.H.,   Influence of growth temperature on SnO2 nanowires.2009. Materials Research Innovations , Volume 13, Issue 3, September 2009, Pages 203-206
Translate »