Institute of Microengineering and Nanoelectronics

 Institute of Microengineering and Nanoelectronics

Proceedings (ISI and SCOPUS Index) 2011

MEMS and Nanoelectronics Group

A room temperature CuO nanowire sensor for organic volatile gases.
Dee, C.F., Tiong, T.Y., Salleh, M.M., Yahya, M.M. & Majlis B.Y.
Proc. 10th WSEAS International Conference on EHAC`11 and ISPRA`11, 3rd WSEAS Int. Conf. on Nanotechnology, Nanotechnology`11, 6th WSEAS Int. Conf. on ICOAA`11, 2nd WSEAS Int.Conf. on IPLAFUN`11, pp. 160-164.

Design consideration of membrane structure for thermal actuated micropump
Hamid N.A., Yunas J., Bahadorimehr A.R. & Majlis B.Y.
Proceedings of International Conference on Materials for Advanced Technologies (ICMAT2011), Advanced Materials Research 254:42-45.

Fabrication of MEMS based microspeaker using bulk micromachining technique
Sugandi, G. & Majlis, B.Y.,
Proceedings of International Conference on Materials for Advanced Technologies (ICMAT2011), Advanced Materials Research 254:171-174.

Simulation study of side-by-side spiral coil design for micro-magnetometer
Sulaiman, N. & Majlis B.Y.
Proceedings of International Conference on Materials for Advanced Technologies (ICMAT2011),  Advanced Materials Research 254:175-178.

Study of the property of indium doped ZnO nanowires.
Ismardi, A., Tiong, T.Y., Dee, C.F. &  Majlis, B.Y.
Proceedings of International Conference on Enabling Science and Nanotechnology, 1341:25-28.

Process development on synthesizing zinc oxide nanorods and fabrication of IDT finger electrodes for surface acoustic wave devices
Badariah Bais, Shamsul Rahimi A. Subki, Chi Chin Yap, Chang Fu Dee & Burhanuddin Yeop Majlis
Proceedings of 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011), pp.295-300.

Microfabrication of sandwich micro-transformers. 
Jumril, Y. & Burhanuddin, Y.M.
Proceedings of   International Conference on Advanced Design and Manufacturing Engineering (ADME), Advanced Materials Research 314-316:1836-1840.

Double-Step plasma etching for SiO2 microcantilever release. 
Rosminazuin Ab Rahim, Badariah Bais & Burhanuddin Yeop Majlis.,
Proceedings of International Conference on Materials for Advanced Technologies (ICMAT2011),  Advanced Materials Research 254: 140-143.

Theoretical analysis of thin film oxide as insulator of planar micro-coils 
Jumril Yunas, Azrul Azlan Hamzah & Burhanuddin Yeop Majlis.
Proceedings of 2nd International Conference on Manufacturing Science and Engineering (ICMSE 2011), Advanced Materials Research 194-196:2462-2466.

Optimization of on-Chip interface circuit for MEMS sensor based on microcantilever
Badariah Bais , Liang Wen Loh, Rosminazuin Ab Rahim, & Burhanuddin Yeop Majlis.,
Advanced Materials Research 254: 13-16.

Investigation of simple process technology for the fabrication of valveless micropumps
Jumril Yunas, Juliana Johari, Bahadorimehr, A.R., Gebeshuber, I.C. & Burhanuddin Yeop Majlis.,
Proceedings of International Conference on Materials for Advanced Technologies (ICMAT2011),  Advanced Materials Research 254:211-214.

Thick-film deposition of high-viscous liquid photopolymer
Jafar Alvankarian, Mitra Damghanian & Burhanuddin Yeop Majlis.,
Proceedings of International Conference on Materials for Advanced Technologies (ICMAT2011),  Advanced Materials Research 254:5-8.

Biomimetic MEMS to assist, enhance and expand human sensory perceptions: a survey on state-of-the art developments.
Makarczuk T., Matin T.R., Karman S.B., Diah S.Z.M., Davaji B., Macqueen M.O., Mueller J., Schmid U. and Gebeshuber I.C.,
Proc. SPIE 8066, 80661O; ISBN 9780819486554.

Design of interdigital structured supercapacitor for powering biomedical devices
Hafzaliza Erny Zainal Abidin, Azrul Azlan Hamzah & Burhanuddin Yeop Majlis,
Proceedings of 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011), pp.

Analysis of material properties for thin film membrane in thermal actuated micropump
Hamid, N.A., Yunas, J. & Majlis, B.Y.,
Proceedings of 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011), pp. 211-214.

Analysis of material properties for thin film membrane in thermal actuated micropump
Alireza Bahadorimehr, Mitra Damghanian & Burhanuddin Yeop Majlis.,
Proceedings of 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011), pp. 211-214.

GEMS: A MEMS-based Way for the Innervation of materials. 
MacQueen, M.O., Mueller, J., Dee C.F.  & Gebeshuber Ille C.,
Advanced Materials Research 254: 34-37.

On the way to the bionic man: a novel approach to MEMS based on biological sensory systems. 
Salmah B. Karman, MacQueen, M.O.,  Matin, T.R., S. Zaleha M. Diah, Mueller, J., Jumril Yunas, Makaruk, T. & Gebeshuber, I.C.,
Advanced Materials Research  254: 38-41

Growth of Sn doped ZnO nanobelts and their properties
Tiong, T. Y., Ismardi, Abrar, Dee, C. F., Yahaya, M. & Majlis, B.Y.,
Proceedings of International Conference on Enabling Science and Nanotechnology, 1341: 114-118.

Nanoindentation characterization of Sn-Ag-Sb/Cu substrate IMC layer subject to thermal aging
Shualdi, W.,   Bais, B.,   Ahmad, I.,   Omar, G. & Isnin, A.,
Proceedings of 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011), pp. 220-223.

Cobalt silicide and titanium silicide effects on nano devices
Elgomati, H.A.,   Majlis, B.Y.,   Salehuddin, F.,   Ahmad, I.,   Zaharim, A. &   Hamid, F.A.,
Proceedings of 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011), pp. 282-285.

Optimizing 35nm NMOS devices VTH and ILEAK by controlling active area and halo implantation dosage
Elgomati, H.A.,   Majlis, B.Y.,   Salehuddin, F.,   Ahmad, I.,   Zaharim, A. &   Hamid, F.A.
Proceedings of 2011 IEEE Regional Symposium on Micro and Nano Electronics (IEEE-RSM2011), pp. 286-290.

Physical characteristic analysis of solenoid-based coil structure
Nadzril Sulaiman, Jumril Yunas, Gandi Sugandi & Burhanuddin Yeop Majlis,
Advanced Materials Research 403-408: 3739-3747.

Growth and characterization of indium doped ZnO nanowires using vapor transport deposition method
Ismardi Abrar, Chang Fu Dee, I. C. Gebeshuber & B.Y. Majlis
Advanced Materials Research 364: 202-205

Organic and Printed Electronics Group

Transparent conductive electrode of fluorine doped tin oxide prepared by inkjet printing technique
Samad, W.Z., Salleh, M.M., Shafiee, A., Yarmo, M.A,
Materials Science Forum 663-665:694-697

Plasmonic responses of gold nanoparticles on organic vapor: Shape effect
Nengsih, S., Umar, A.A., Salleh, M.M., Yahaya, M., Oyama, M., Majlis, B.Y., 
Materials Science Forum 663-665:956-960

Fluorescence gas sensor using CdTe quantum dots film to detect volatile organic compounds
Bakar, N.A., Rahmi, A., Umar, A.A., Salleh, M.M., Yahaya, M.,
Materials Science Forum 663-665:276-279 276-279

The effect of donor:acceptor ratio on the generated photocurrent of inkjet printed blended poly (3-octylthiophene-2.5-diyl) and (6,6)-phenyl C71 butyric acid methyl ester bulk heterojunction organic solar cells
Fauzia, V., Umar, A.A., Salleh, M.M., Yahaya, M.
Materials Science Forum 663-665:823-827

Bright photoluminescence of CdTe quantum dots formed in phosponic-oleic acids binary surfactants
Rahmi, A., Umar, A.A., Salleh, M.M., Majlis, B.Y., Oyama, M.,
Materials Science Forum 663-665:25-28

Implementation of ZnO nanorods as sensing elements for a surface acoustic wave sensor
Dee, C.F., Aw, K.C., Wright, B., Yan, X., Zou, C., Gao, W., Salleh, M.M., Majlis, B.Y., Lee, J.D.,
Materials Science Forum 663-665:563-567

Effect of La2O3 additions on microstructure, morphology and pressure sensing behaviour of PZT based ceramics sintered in Al2O3 environment
Hj. Jumali, M.H., Ying, T.Y., Ramli, N., Salleh, M.M., Yahaya, M.,
Advanced Materials Research, 173:96-101

Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods
Samad, W.Z., Yarmo, M.A., Salleh, M.M.,
Advanced Materials Research 173:128-133

Cold deposition of zinc sulfide optical waveguides using thermoelectric device
Salleh, S., Rutt, H.N., Dalimin, M.N., Salleh, M.M.,
Advanced Materials Research 264-265:856-861

Molybdenum Tp* nitrosyldithiolene complex as potential photosensitizer for photoelectrochemical cell.
Mark LeeWun Fui, Ng Kim Hang, Lorna Jeffery Minggu, Akrajas Ali Umar, Mohammad B. Kassim,
The 3rd International Conference on Fuel Cell & Hydrogen Technology ICFCHT 2011, Kuala Lumpur

A room temperature CuO nanowire sensor for organic volatile gases. 
Dee, C.F., Tiong, T.Y., Salleh, M.M., Yahya, M.M., Majlis, B.Y.,
10th WSEAS International Conference on EHAC’11 and ISPRA’11, 3rd WSEAS Int. Conf. on Nanotechnology, Nanotechnology’11, 6th WSEAS Int. Conf. on ICOAA’11, 2nd WSEAS Int.Conf. on IPLAFUN’11: 160-164.

Effect of organic salt doping ratios on the performance of poly(9,9-di-n-hexylfluorenyl-2,7-diyl) organic light emitting diode, OLED. 
Mokhtar, M.S.A.M., Chin Yap, C., Mat Salleh, M., Ali Umar, A., Yahaya, M.,
AIP Conference Proceedings 1328: 264-267.

 Photonics Group

Simulation of MQC code of SAC/Optical CDMA and WDM hybrid overlay system
Isaac A. M. Ashour, Hossam M. H. Shalaby, Sahbudin Shaari and P Susthitha Menon,

Performance Analysis of SAC/Optical CDMA and WDM Under a Hybrid Overlay Scheme 
Isaac A. M. Ashour, Hossam M. H. Shalaby and P Susthitha Menon,

Code Development for Simultaneous In-band Transmission of Both SAC-Optical CDMA and WDM Channels
Isaac A. M. Ashour, Hossam M. H. Shalaby and P Susthitha Menon,

Electrical Characteristics of Silicon-On-Insulator (SOI) Phase Modulator
Hanim Abdul Razak, Hazura Haroon, Mardiana Bidin, Wan Maisarah Mukhtar, ZulAtfyi Fauzan Mohammed Napiah and P.Susthitha Menon,

Impact of Coupled Resonator Geometry on Silicon-on Insulator Wavelength Filter Characteristics
Hazura Haroon, Mardiana Bidin, Hanim Abdul Razak, Menon, P.S, N. ARSAD and Zulatfyi F. Mohammed Napiah,

Effects of Mn doping concentrations on properties of ZnO thin films
A. R. A. Rashid, P. S. Menon, S. Shaari,

A New Analytical Model for Lateral Breakdown Voltage of Double-gate Power MOSFETs
Hossein Mohammadi, Huda Abdullah, Chang Fu Dee, P. Susthitha Menon, Burhanuddin Yeop Majlis,

Transient performance of silicon-on-insulator (SOI) phase modulator
Hanim, A.R., Hazura, H., Mardiana, B., Shaari, S., Menon, P.S.,

Electro-optical modulator performance in SOI
Mardiana, B., Hanim, A.R., Hazura, H., Shaari, S., Menon, P.S.,

Free carrier absorption loss of p-i-n silicon-on-insulator (SOI) phase modulator
Hazura, H., Hanim, A.R., Mardiana, B., Shaari, S., Menon, P.S.,

Acrylic-based 1×2 Y-Branch POF Coupler with High Index Contrast Waveguide Taper
Ehsan A. A.; Abd Rahman M. K.,

MIPAC Group

The Re-Evaluation of Mechanical Properties of Wire Bonding
Azman Jalar, M. Nubli Zulkifli, N. Kamil Othman & Shahrum Abdullah
IEEE Proceedings

Sn-rich phase coarsening in Sn-Ag-Cu solder joint during moderate current stressing
Saud, N., Jalar, A.
Advanced Materials Research

Quantitative stereology for roughness morphology of aluminium alloy
N.E.Salehudin, A.Jalar, A.R. Daud
Advanced Materials Research

Research on Effect of High Energy Implant to Resist Thickness
Hazian Mamat, Nur Firdaus A. Rahim, Mohd Zahrin A. Wahab, Azman Jalar
Advanced Materials Research

Temperature Coefficient of Resistance (TCR) measurement method to evaluate metal process of CMOS Technology
M. Z. Abdul Wahab, H. Mamat, A. Jalar
Advanced Materials Research

The Effect of Filler Metals on Mechanical Properties of 6 mm AA 6061-T6 Welded Joints
N. K. Othman, S. R. S. Bakar, A. Jalar, J. Syarif and M. Y. Ahmad
Advanced Materials Research

The Effect of Underfill Fillet Geometry to Die Edge Stress for Flip Chip Packaging
A. Jalar, Z.Kornain, R.Rasid, S.Abdullah, N.K. Othman
Advanced Materials Research

Effect of Different Filler Metals Towards Welding of AA6061 Al Alloy By X-ray Ct Scan
C. L. Nur Azida, A. Jalar, N. K. Othman, N. M. Rashdi, Md. Z. Ibel
Advanced Materials Research

Investigation on Cooling Slope and Conventional Stir Cast A356/Al2O3 Metal Matrix Composites
H. Budiman, M. Z. Omar, A. Jalar and J. Syarif
Advanced Materials Research

The effect of filler ER4043 and ER5356 on porosity distribution of welded AA6061 aluminium alloy
N. A. Che Lah, M. F. Ahmad Ibrahim, A. Jalar, J. Sharif, N. K. Othman and N. M. Rashdi
Advanced Materials Research

Nanoindentation Approach for Evaluation of Process Parameters Effect on The Strength of Bonded Au Ball Bonds
S. Abdullah, M. N. Zulkifli, and A. Jalar
Advanced Materials Research

Nanoindentation Test for the Strength Distribution Analysis of Bonded’Au Ball Bonds
S. Abdullah, M. N. Zulkifli, and A. Jalar
Advanced Materials Research

Nanoindentation Test for the Stiffness Distribution Analysis of Bonded Au Ball Bonds
N. K. Othman, M. N. Zulkifli, A. Jalar, and S. Abdullah
Advanced Materials Research

Translate »