{"id":308,"date":"2015-04-26T08:25:29","date_gmt":"2015-04-26T08:25:29","guid":{"rendered":"https:\/\/www.ukm.my\/imen\/?page_id=308"},"modified":"2015-04-26T08:25:29","modified_gmt":"2015-04-26T08:25:29","slug":"journal-index-isi-and-scopus-2011","status":"publish","type":"page","link":"https:\/\/www.ukm.my\/imen\/publications-2011\/journal-index-isi-and-scopus-2011\/","title":{"rendered":"Journal (Index ISI and SCOPUS) 2011"},"content":{"rendered":"

MEMS and Nanoelectronics Group<\/strong><\/p>\n

Theoretical analysis of stiffness constant and effective mass for a round-folded beam in MEMS accelerometer<\/strong>
\nWong, W.C., Azid, I.A. & Majlis, B.Y.,
\nStrojniski Vestnik- Journal of Mechanical Engineering 57(6):517-525.<\/em><\/p>\n

Fabrication of an integrated microfluidic perfusion system for mixing different solutions<\/strong>
\nAlireza Bahadorimehr, Azrul Azlan Hamzah & Burhanuddin Yeop Majlis.,
\nInternational Journal of Pharmacy and Pharmaceutical Sciences\u00a0 3(1):30-33.<\/em><\/p>\n

3D Corporate Tourism: a concept for innovation in nanomaterials engineering<\/strong>
\nGebeshuber, I.C. & Majlis, B.Y.,
\nInternational Journal of Materials Engineering Innovation 2(1): 38-48<\/em><\/p>\n

Piezoelectric micropump with nanoliter per minute flow for drug delivery systems<\/strong>
\nJuliana Johari, Jumril Yunas, Azrul Azlan Hamzah & Burhanuddin Yeop Majlis,
\nSains Malaysiana 40(3): 275\u2013281<\/em><\/p>\n

MEMS very low capacitive pressure sensor based on CMOS Process<\/strong>
\nMuhamad Ramdzan Buyong, Norazreen Abd Aziz & Burhanuddin Yeop Majlis
\nSains Malaysiana\u00a0 40(3): 259\u2013266.<\/em><\/p>\n

Effects of annealing conditions on the surface morphology and crystallinity of sputtered ZnO nano films<\/strong>
\nKaramdel, J., Dee, C.F. & Yeop Majlis, B
\nSains Malaysiana 40(3): 209\u2013213<\/em><\/p>\n

Amorphization of ZnO nanowires by proton beam irradiation<\/strong>
\nDee,C.F., Ishaq Ahmad, Yan, L., Zhou, X.\u00a0 & Yeop Majlis, B
\nNano 6(3): 259\u2013263<\/p>\n

Contact welding study of carbon nanotube with ZnO nanowire<\/strong>
\nDee, C.F., Ishaq Ahmad, Long, Y. Zhou, X,\u00a0Salleh, M. M. & Majlis, B. Y
\nPhysica E: Low-dimensional Systems and Nanostructures 43(10): 1857-1862.<\/em><\/p>\n

Effect of substrate temperature on gold-catalyzed silicon nanostructures growth by hot-wire chemical vapor deposition (HWCVD)<\/strong>
\nSu Kong Chong, Boon Tong Goh, Zarina Aspanut, Muhamad Rasat Muhamad, Chang Fu Dee & S. Abdul Rahman
\nApplied Surface Science\u00a0 257(8):\u00a0 3320-3324.<\/em><\/p>\n

Silicon nanostructures fabricated by Au and SiH4 co-deposition technique using hot-wire chemical vapor deposition<\/strong>
\nS.K. Chong, B. Tong Goh, Z. Aspanut, M.R. Muhamad, B.Varghese, C. Haur Sow, C.F. Dee & S. Abdul Rahman
\nThin Solid Films\u00a0 520(1): 74-78<\/em><\/p>\n

Effect of rf power on the growth of silicon nanowires by hot-wire assisted plasma enhanced chemical vapor deposition (HW-PECVD) technique<\/strong>
\nS.K. Chong, B.T. Goh, Z. Aspanut, M. Rasat Muhamad, Chang Fu Dee & Saadah Abdul Rahman
\nThin Solid Films 519(15): 4933-4939<\/em><\/p>\n

Implementation of ZnO nanorods as sensing elements for a surface acoustic wave sensor<\/strong>
\nDee, C.F., Aw, K.C., Wright, B., Yan, X., Zou, C., Gao, W., Salleh, M.M., Majlis, B.Y. &\u00a0 Lee, J.D.
\nMaterials Science Forum 663-665: 563-567\u00a0<\/em><\/p>\n

Radial growth of slanting-columnar nanocrystalline Si on Si nanowires<\/strong>
\nChong, S.K., Goh, B.T., Aspanut, Z., Muhamad, M.R., Dee, C.F. & Rahman, S.A.
\nChemical Physics Letters 515(1-3): 68-71<\/em>.<\/p>\n

Synthesis of indium-catalyzed Si nanowires by hot-wire chemical vapor deposition<\/strong>
\nChong, S.K., Goh, B.T., Aspanut, Z., Muhamad, M.R., Dee,<\/strong>\u00a0C.F. & Rahman, S.A.
\nMaterials Letters 65 (15-16): 2452-2454<\/em><\/p>\n

Fabrication of glass-based microfluidic devices with photoresist as mask<\/strong>
\nBahadorimehr, Alireza & Majlis, Burhanuddin Yeop
\nJournal of Microelectronics Electronic Components and Materials\u00a0 41(3): 193-196<\/em><\/p>\n

Triggered, nanostructured biodegradables (TNBs) for surgical implants<\/strong>
\nGordon, R., Levin, S.M. & Gebeshuber, I.C.
\nMicro and Nanosystems 3(4): 284-289<\/em>.<\/p>\n

Bioinspiration for tribological systems on the micro- and nanoscale: Dynamic, mechanic, surface and structure related functions<\/strong>
\nGebeshuber, I.C. & Gordon, R.,
\nMicro and Nanosystems 3(4) : 271-276<\/em><\/p>\n

Syntesis and characterisation of Zn\u2013Sn\u2013In\u2013O quaternary nanostructure system<\/strong>
\nA. Ismardi, C. F. Dee, H. Abdullah, B. Y. Majlis & M. M. Salleh,
\nMaterials Research Innovations\u00a0 15(2):173-175<\/em><\/p>\n

Application of Taguchi method in the optimization of process variation for 32nm CMOS technology<\/strong>
\nElgomati, H.A., Majlis, B.Y., Ahmad, I., Salehuddin, F., Hamid, F.A., Zaharim, A. & Apte, P.R.,
\nAustralian Journal of Basic and Applied Sciences 5(7): 346-355<\/em><\/p>\n

Effects of substrate on surface morphology, crystallinity, and photoluminescence properties of sputtered ZnO nano films<\/strong>
\nKaramdel, J., Hadi, A., Dee, C.F. & Majlis, B.Y.,
\nIonics , pp. 1-5, Article in Press<\/em><\/p>\n

Microcantilever release process using micromachining technology<\/strong>
\nRosminazuin Ab. Rahim, Badariah Bais & Burhanuddin Yeop Majlis
\nJournal of Science and Technology in the Tropics 7(2): 105-108<\/em>.<\/p>\n

Photoluminescence investigation of high quality GaAs(1-x)Bi(x) on GaAs<\/strong>
\nMohmad, A. R., Bastiman, F., Hunter, C. J., Ng, J. S.,Sweeney, S. J. & David, J. P. R.,
\nApplied Physics Letters 98(12): DOI: 10.1063\/1.3565244<\/em><\/p>\n

Finite element and system level analyses of piezoresistive microcantilever for biosensing applications<\/strong>
\nMuhammad, N.A., Bais, B.H., Ahmad, I. & Isnin, A.
\nAustralian Journal of Basic and Applied Sciences 5(12): 1038-1046<\/em>.<\/p>\n

Synthesis and characterization of well-aligned catalyst-free phosphorus-doped<\/strong>
\nJ. Karamdel, C.F. Dee,<\/strong>\u00a0K.G. Saw, B. Varghese, C.H. Sow, I. Ahmad & B.Y. Majlis
\nJournal of Alloys and Compounds 512(1): 68\u2013 72<\/em><\/p>\n

Photonics Group<\/strong><\/p>\n

Towards a novel simulation approach for the transport of atomic states through polarized photons<\/strong>
\nMd. Mijanur Rahman and P. K. Choudhury
\nOptik<\/em><\/p>\n

On the quantum link for transport of logic states<\/strong>
\nMd. Mijanur Rahman and P. K. Choudhury
\nOptik<\/em><\/p>\n

On the investigation of field and power through photonic crystal fibers: a simulation approach<\/strong>
\nMd. Mijanur Rahman and P. K. Choudhury
\nOptik<\/em><\/p>\n

On the tapered optical fibers with radially anisotropic liquid crystal clad<\/strong>
\nP. K. Choudhury and W.K. Soon
\nProgress in Electromagnetics Research<\/em><\/p>\n

Md. Mijanur Rahman and P. K. Choudhury<\/strong>
\nCavity quantum electrodynamics for photon mediated transfer of quantum states
\nJournal of Applied Physics<\/em><\/p>\n

On the dispersion relations of tapered core optical fibers with liquid crystal clad<\/strong>
\nP. K. Choudhury and P. T. S. Ping
\nProgress in Electromagnetics Research<\/em><\/p>\n

Comparison of mesa and device diameter variation in double wafer-fused multi quantum-well, long-wavelength vertical cavity surface emitting lasers<\/strong>
\nMenon PS, Kandiah K, Ismail M, Majlis BY, Shaari S
\nSains Malaysiana<\/em><\/p>\n

Concentration-dependent minority carrier lifetime in an In(0.53)Ga(0.47)As interdigitated lateral PIN photodiode based on spin-on chemical fabrication methodology<\/strong>
\nP. S. Menon, K. Kandiah, A. A. Ehsan & S. Shaari
\nInternational Journal of Numerical Modelling: Electronic Networks, Devices and Fields<\/em><\/p>\n

Optical and structural properties of Zn(1-x)FexS nanoparticles synthesized by chemical bath deposition method<\/strong>
\nSelmani, S., Abdullah, H., Shaari, S., Abd-Shukor, R.
\nFunctional Materials Letters<\/em><\/p>\n

ZnO: Sn Deposition by Sol-gel Method: Effect of Anealling on the Structural, Morphology and Optical Properties<\/strong>
\nH. Abdullah, S. Selmani, M.N. Norazia, P.S. Menon, S. Shaari & C.F. Dee
\nSains Malaysiana<\/em><\/p>\n

Investigation of In-band Transmission of Both SAC\/OCDMA and WDM Signals<\/strong>
\nIsaac A. M. Ashour, Sahbudin Shaari, Hossam M. H. Shalaby, P Susthitha Menon
\nOptical<\/em><\/p>\n

Variable coupling ratio Y-Branch plastic Optical fiber (POF) coupler with suspended waveguide taper<\/strong>
\nEhsan, A.A., Shaari, S., Abd Rahman, M.K.
\nProgress In Electromagnetics Research C<\/em><\/p>\n

Plastic optical fiber coupler with high index contrast waveguide taper\u00a0<\/strong>
\nEhsan, A.A., Shaari, S., Rahman, M.K.A.
\nProgress In Electromagnetics Research C<\/em><\/p>\n

Acrylic and metal based Y-branch plastic optical fiber splitter with optical NOA63 polymer waveguide taper\u00a0<\/strong>region,
\nEhsan, A.A., Shaari, S., Rahman, M.K.A.
\nOptical Review<\/em><\/p>\n

Fabrication of 1\u00d72 asymmetric plastic optical fiber coupler for portable optical access-card system<\/strong>
\nEhsan, A.A., Shaari, S., Rahman, M.K.A.
\nOptical Review<\/em><\/p>\n

Analysis of single-mode condition and high-order modes discrimination in photonic crystal VCSEL<\/strong>
\nAlias, M.S., Shaari, S.
\nApplied Physics B: Lasers and Optics<\/em><\/p>\n

Organic and Printed Electronics Group<\/strong><\/p>\n

A simple route to vertical array of quasi-1D ZnO nanofilms on FTO surfaces: 1D-crystal growth of nanoseeds under ammonia-assisted hydrolysis process<\/strong>
\nAkrajas Ali Umar, Mohd Yusri Abd Rahman, Rika Taslim, Muhamad Mat Salleh and Munetaka Oyama,
\nNanoscales Research Letters 6:564<\/em><\/p>\n

Detection of volatile organic compound gas using localized surface plasmon resonance of gold nanoparticles<\/strong>
\nNengsih, S., Umar, A.A., Salleh, M.M., Yahaya, M.
\nSains Malaysiana 40(3):231-235<\/em><\/p>\n

Determination of HOMO and LUMO of [6,6]-phenyl C61-butyric acid 3-ethylthiophene ester and poly (3-octyl-thiophene-2, 5-diyl) through voltametry characterization<\/strong>
\nShafiee, A., Salleh, M.M., Yahaya, M.
\nSains Malaysiana 40(2):173-176<\/em><\/p>\n

Formation of High-Density Crystalline-Shape Gold Nanoparticles on Indium Tin Oxide Surfaces: Effects of Alcohothermal Seeding<\/strong>
\nUmar, AA; Salleh, MM; Majlis, BY; Oyama, M
\nJournal of Nanoscience and Nanotechnology 11(6):4974-4980<\/em><\/p>\n

Optical features of the gold nanoparticles deposited on ITO substrates<\/strong>
\nAziz, M.A., Oyama, M., Ozga, K., Wojciechowski, A., Al Zayed, N., Kityk, I.V., Umar, A.A
\nOptics Communications Vol 284, 245-248<\/em><\/p>\n

Chemical synthesis of metal nanoparticles in aqueous solutions with the presence of some additives<\/strong>
\nOyama, M., Umar, A.A., Salleh, M.M., Majlis, B.Y.,
\nSains Malaysiana 40(12):1345-135<\/em><\/p>\n

Photoinduced absorption of Ag nanoparticles deposited on ITO substrate<\/strong>
\nOzga K., Oyama M., Szota M., Nabia\u00c5\u201aek M., Kityk I.V., \u00c5\u0161lzak A., Umar A.A., Nouneh K.
\nJournal of Alloys and Compounds 509S: S424-S426<\/em><\/p>\n

Effect of organic salt doping on the performance of single layer bulk heterojunction organic solar cell<\/strong>
\nYap, C.C., Yahaya, M., Salleh, M.M.,
\nSolar energy 85(1):95-99<\/em><\/p>\n

Influence of PANI additions on methanol sensing properties of ZnO thin films<\/strong>
\nHaji Jumali, M.H., Ramli, N., Izzuddin, I., Salleh, M.M., Yahaya, M.,
\nSains Malaysiana 40(3):203-208<\/em><\/p>\n

M.A. Structural, optical and electrical properties of fluorine doped tin oxide thin films deposited using inkjet printing technique<\/strong>
\nSamad, W.Z., Salleh, M.M., Shafiee, A., Yarmo,
\nSains Malaysiana 40(3):251-257 3301-3315<\/em><\/p>\n

3,5-Dibromo-2-[2,5-dibutoxy-4-(3,5-dibromothiophen-2–yl)phenyl]thiophene<\/strong>
\nChin Hoong Teh, R. Daik, M.M. Salleh, M. Ibrahim Mohamed Tahir and M.B. Kassim
\nActa Crystallographica Section E E67,O3183<\/em><\/p>\n

Fluorescent and nonlinear optical features of CdTe quantum dots<\/strong>
\nUmar, A.A., Reshak, A.H., Oyama, M., Plucinski, K.J
\nJournal of Materials Science: Materials in Electronics DOI 10.1007\/s10854-011-0434-6<\/em><\/p>\n

Growth of platinum nanoparticles on stainless steel 316L current collectors to improve carbon-based supercapacitor performance<\/strong>
\nTaer, E., Deraman, M., Talib, I.A., Hashmi, S.A., Umar, A.A,
\nElectrochimica Acta 56: 10217-10222<\/em><\/p>\n

Preparation of a highly porous binderless activated carbon monolith from rubber wood sawdust by a multi-step activation process for application in supercapacitors<\/strong>
\nTaer, E., Deraman, M., Talib, I.A., Awitdrus, A., Hashmi, S.A., Umar, A.A.,
\nInternational Journal of Electrochemical Science 6: 3301-3315<\/em><\/p>\n

Micro and Nanoelectronics System Group<\/strong><\/p>\n

Designing of a Fuzzy Logic based Traffic Controller System using VHDL<\/strong>
\nMd. Shabiul Islam
\nAustralian Journal of Basic and Applied Sciences<\/em><\/p>\n

Microelectronics and Semiconductor Packaging<\/strong><\/p>\n

Kesan Teknik Pengaktifan Bermangkin Berbeza Terhadap Prestasi Terma Penyebar Haba Cip Balikan<\/strong>
\nC.S. Foong, Ibrahim Ahmad, Azami Zaharim, Rozaidi Rasid & Azman Jalar,
\nSains Malaysiana<\/em><\/p>\n

Oxidation Effect of Welded AA6061 Al Alloy Using ER5356 Filler Metal<\/strong>
\nChe Lah Nur Azida, Azman Jalar, Norinsan Kamil Othman, Abdul Razak Daud,
\nJournal of Applied Mechanics and Materials<\/em><\/p>\n

Oxidation Effect on Welded AA6061 Al Alloy Using ER4043 Filler Metal<\/strong>
\nC.L. Nur Azida, A. Jalar, N.K. Othman, A.R. Daud,
\nJournal of Applied Mechanics and Materials<\/em><\/p>\n

Estimation of curing profile\u2019s parameters for Flip Chip packaging using DSC and TGA<\/strong>
\nKornain, Z., Jalar, A., Rasid, R., Foong, C.S., Wong, T.L.,
\nKey Engineering Materials<\/em><\/p>\n

Corrosion Behavior of Fe-Cr Alloys in Ar-10%O2 Atmosphere<\/strong>
\nN. K. Othman, N. Othman and A. Jalar
\nKey Engineering Materials<\/em><\/p>\n

Rashdi, N., Kornain, Z., Effect of different fillers on microstructure and tensile properties of welded AA6061-T6<\/strong>
\nAziz, A.A.A., Ibrahim, M.F.A., Jalar, A., Junaidi, S., Abdullah, S.,
\nKey Engineering Materials<\/em><\/p>\n

Effect of porosity on tensile behaviour of welded AA6061-T6 aluminium alloy<\/strong>
\nM. F. Ahmad Ibrahim, S.R.S.Bakar, A. Jalar, N. K. Othman, J. Sharif, A. R. Daud and N. M. Rashdi,
\nApplied Mechanics and Materials<\/em><\/p>\n

Stress Distribution Effect on a Stacked-Die QFN Package Manufacturing Processes<\/strong>
\nI. Abdullah, A. Jalar, S. Abdullah, M. F. Rosle and M.F. Mod Yunoh,
\nKey Engineering Materials<\/em><\/p>\n

Durability Assessment of Quad Flat No-Lead Package Using Signal Analysis<\/strong>
\nM.F. M. Yunoh, S. Abdullah, A. Jalar, L. Abdullah and M.F. Abdullah,
\nKey Engineering Materials<\/em><\/p>\n

Effect of Hook Location for Ultra Fine Pitch Wirebonding Pull Testing Method<\/strong>
\nF. Harun, Azman Jalar, Shahrum Abdullah, Mohd Faridz Mod Yunoh,
\nKey Engineering Materials<\/em><\/p>\n

Microstructural Behaviour Study and FEA-Based Fatigue Simulation on Parabolic Leaf Spring<\/strong>
\nFayyadh Nakhaie Ahmad Refngah, Shahrum Abdullah, Azman Jalar, L.B. Chua,
\nKey Engineering Materials<\/em><\/p>\n

The study of underfill epoxy hardness in reducing curing process time for flip chip packaging<\/strong>
\nZainudin Kornain, Azman Jalar, Rozaidi Rasid and Shahrum Abdullah,
\nKey Engineering Materials<\/em><\/p>\n

Effect of gamma-irradiation towards stress-strain curve of single die QFN package<\/strong>
\nWan Yusmawati Wan Yusoff, Azman Jalar, Norinsan Kamil Othman, Irman Abdul Rahman,
\nMaterials Science Forum<\/em><\/p>\n

Synthesis of porous MgO into sheet-like structure via solution routes<\/strong>
\nMaria Abu Bakar, Muhammad Azmi Abdul Hamid, Azman Jalar and Roslinda Shamsudin,
\nMaterials Science Forum<\/em><\/p>\n

Hardness Test on an Epoxy Mold Compounds of a Quad Flat No Lead Package Using the Depth Sensing Nanoindentation<\/strong>
\nS. Abdullah, M.F.M. Yunoh, A. Jalar and M.F. Abdullah,
\nMaterials Science Forum<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"

MEMS and Nanoelectronics Group Theoretical analysis of stiffness constant and effective mass for a round-folded beam in MEMS accelerometer Wong, W.C., Azid, I.A. & Majlis, …<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":291,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":{"footnotes":""},"class_list":["post-308","page","type-page","status-publish","hentry"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/pages\/308","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/comments?post=308"}],"version-history":[{"count":1,"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/pages\/308\/revisions"}],"predecessor-version":[{"id":309,"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/pages\/308\/revisions\/309"}],"up":[{"embeddable":true,"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/pages\/291"}],"wp:attachment":[{"href":"https:\/\/www.ukm.my\/imen\/wp-json\/wp\/v2\/media?parent=308"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}