Sains Malaysiana 50(8)(2021): 2445-2453

http://doi.org/10.17576/jsm-2021-5008-25

 

Efficiency Assessment of Transport Manufacturing Firms using a Stochastic Frontier Analysis Approach

(Penilaian Kecekapan Firma Pembuatan Pengangkutan menggunakan Suatu Pendekatan Analisis Stokastik Perbatasan)

 

AMMAR FIKREE MOHAMED JOFREE1, NORAYATI HASHIM1, MOHD FAHMY-ABDULLAH1,3*, LAI WEI SIENG2 & SULHI RIDZUAN3

 

1Faculty of Technology Management & Business, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor Darul Takzim, Malaysia

 

2Faculty of Economic and Management, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor Darul Ehsan, Malaysia

 

3Oasis Integrated Group, Institute for Integrated Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor Darul Takzim, Malaysia

 

Diserahkan: 7 Julai 2020/Diterima: 18 Disember 2020

 

ABSTRACT

This paper aims to analyze the level of technical efficiency and determinants of technical inefficiency of transport manufacturing firms in Malaysia using Stochastic Frontier Analysis (SFA) approach from 2005 to 2010. Through SFA approach, hypothesis test is conducted in order to select Cobb-Douglas or Translog production function and testing the effects of technical inefficiencies. While the determining factors that been taken into account include the capital-labor ratio, training expenses, education level ratio, wage rate, information and communication technology expenditure, and firm size. Hypothesis test results show that the Cobb-Douglas production function is rejected. While the test for the effect of technical inefficiency shows its existence. Training expenses, secondary and tertiary education level ratios, wage rates and information and communication technology expenses are significant determinants for transportation manufacturing firms. However, the capital-labor ratio was found that it has reduced the level of technical efficiency. The implications of these results show that firms need to focus on investing in human capital, information technology and increase motivation among employees such as rising wage rates and reducing the use of capital appropriate to the technology.

Keywords: Manufacturing; stochastic frontier analysis; technical efficiency; technical inefficiency; transportation

 

ABSTRAK

Kertas ini bertujuan untuk menganalisis tahap kecekapan teknik dan faktor penentu ketidakcekapan teknik firma pembuatan pengangkutan di Malaysia menggunakan pendekatan AnalisisStokastik Perbatasan (SFA) dari tahun 2005 hingga 2010. Melalui pendekatan SFA, ujian hipotesis dijalankan terlebih dahulu untuk memilih fungsi pengeluaran Cobb-Douglas atau Translog dan ujian kesan ketidakcekapan teknik. Manakala faktor penentu yang diambil kira termasuklah nisbah modal-buruh, perbelanjaan latihan, nisbah tahap pendidikan, kadar upah, perbelanjaan teknologi maklumat dan komunikasi dan saiz firma. Keputusan ujian hipotesis menunjukkan fungsi pengeluaran Cobb-Douglas ditolak. Manakala ujian kesan ketidakcekapan teknik menunjukkan kewujudannya. Perbelanjaan latihan, nisbah tahap pendidikan menengah dan tinggi, kadar upah dan perbelanjaan teknologi maklumat dan komunikasi merupakan faktor penentu yang signifikan bagi firma pembuatan pengangkutan. Namun, nisbah modal-buruh didapati telah mengurangkan tahap kecekapan teknik. Implikasi daripada keputusan ini menunjukkan bahawa firma perlu menitikberatkan pelaburan terhadap modal manusia, teknologi maklumat dan meningkatkan motivasi di kalangan pekerja seperti kenaikan kadar upah serta pengurangan terhadap penggunaan modal yang sesuai dengan tahap teknologi.

Kata kunci: Analisisstokastik perbatasan; kecekapan teknik; ketidakcekapan teknik; pembuatan; pengangkutan

 

RUJUKAN

Ajibefun, I.A. 2008. Technical efficiency analysis of micro-enterprises: Theoretical and methodological approach of the stochastic frontier production functions applied to Nigerian data. Journal of African Economies 17(2): 161-206.

Alvarez, R. & Crespi, G. 2003. Determinants of technical efficiency in small firms. Small Business Economics 20(3): 233-244.

Amornkitvikai, Y. & Harvie, C. 2010. Identifying and measuring technical inefficiency factors: Evidence from unbalanced panel data for Thai listed manufacturing enterprises. Economics Working Papers wp 10-05, School of Economics, University of Wollongong, NSW, Australia.

Battese, G.E. & Coelli, T.J. 1995. A model for technical inefficiency effects in a stochastic frontier production function for panel data. Empirical Economics 20(2): 325-332.

Chu, S.N. & Kalirajan, K. 2011. Impact of trade liberalisation on technical efficiency of Vietnamese manufacturing firms. Science Technology & Society 16(3): 265-284.

Coelli, T.J. 1996. A guide to FRONTIER version 4.1: A computer program for stochastic frontier production and cost function estimation. CEPA Working Paper No. 7/96, Department of Econometrics, University of New England, Armidale.

Coelli, T.J., Rao, D.S.P., O'Donnell, C.J. & Battese, G.E. 2005. An Introduction to Efficiency and Productivity Analysis. Berlin: Springer Science & Business Media.

Cullinane, K., Wang, T.F., Song, D.W. & Ji, P. 2006. The technical efficiency of container ports: Comparing data envelopment analysis and stochastic frontier analysis. Transportation Research Part A: Policy and Practice 40(4): 354-374.

DOSM. 2012. Annual National Accounts (GDP) 2005-2011. Department of Statistic Malaysia (DOSM).

Fahmy-Abdullah, M. 2017. Technical efficiency and total factor productivity in transport manufacturing firms in Malaysia. Doctoral dissertation, Universiti Kebangsaan Malaysia, Malaysia (Unpublished).

Fahmy-Abdullah, M., Sieng, L.W. & Isa, H.M. 2019a. Technical efficiency evaluation: Study on Malaysian electrical and electronics firms. Asian Academy of Management Journal 24(2): 1-19.

Fahmy-Abdullah, M., Sieng, L.W. & Ridzuan, S. 2019b. Analisis penyampulan data (DEA) dua peringkat dalam mengenal pasti faktor penentu kecekapan teknik firma pembuatan pengangkutan. Sains Malaysiana 48(4): 901-908.

Fahmy-Abdullah, M., Ismail, R., Sulaiman, N. & Talib, B.A. 2017. Technical efficiency in transport manufacturing firms: Evidence from Malaysia. Asian Academy of Management Journal 22(1): 57-77.

Hamdan, H., Fahmy-Abdullah, M. & Sieng, L.W. 2019. Technical efficiency of Malaysian furniture manufacturing industry: A stochastic frontier analysis approach. International Journal of Supply Chain Management 8(6): 929-937.

Holmgren, J. 2013. The efficiency of public transport operations - an evaluation using stochastic frontier analysis. Research in Transportation Economics 39(1): 50-57.

Honig, B. 2001. Human capital and structural upheaval: A study of manufacturing firms in the West Bank. Journal of Business Venturing 16(6): 575-594.

Hossain, M.M., Majumder, A.K. & Basak, T. 2012. An application of non - linear cobb-douglas production function to selected manufacturing industries in Bangladesh. Open Journal of Statistic 2(4): 460-468.

Idris, A.I.M., Fahmy-Abdullah, M. & Sieng, L.W. 2019. Technical efficiency of soft drink manufacturing industry in Malaysia. International Journal of Supply Chain Management 8(6): 908-916.

Karlaftis, M.G. 2010. Ownership and competition in European transit: Assessing efficiency. Transportmetrica 6(2): 143-160.

Karlaftis, M.G. & Tsamboulas, D. 2012. Efficiency measurement in public transport: Are findings specification sensitive? Transportation Research Part A: Policy and Practice 46(2): 392-402.

Karunaratne, N.D. 2012. Macroeconomic reform and technical efficiency in Australian manufacturing - A stochastic production frontier analysis. Economia Internazionale/International Economics.

Khalifah, N.A. 2013. Ownership and technical efficiency in Malaysia's automotive industry: A stochastic frontier production function analysis. The Journal of International Trade & Economic Development 22(4): 509-535.

Khalifah, N.A. & Abdul Talib, B. 2008. Are foreign multinationals more efficient? A stochastic production frontier analysis of Malaysia’s automobile industry. International Journal of Management Studies 15: 91-113.

Kodde, D.A. & Palm, F.C. 1986. Wald criteria for jointly testing equality and inequality restrictions. Econometrica 54(5): 1243-1248.

Kumbhakar, S. & Lovell, C.A.K. 2003. Stochastic Frontier Analysis. Cambridge: Cambridge University Press.

Latif, M.S.A., Fahmy-Abdullah, M. & Sieng, L.W. 2019. Determinants factor of technical efficiency in machinery manufacturing industry in Malaysia. International Journal of Supply Chain Management 8(6): 917-928.

Md Isa, R. 2005. Total factor productivity growth, efficiency and technological progress of the Malaysian manufacturing sector. Universiti Putra Malaysia. Ph.D. Thesis (Unpublished).

MITI. 2013. National Automotive Policy 2014. Ministry of International Trade and Industry (MITI).

Nik Mustapha, N.H. & Basri, M.T. 2004. Technical efficiency and total factor growth in selected Malaysian manufacturing industries. In Proceeding Seminar Economic and Social Competitiveness Towards Strengthening Economic Development, edited by Doris Padmini, Poo Bee Tin & Mohd Nasir Mohd Saukani. 11-13 June. Port Dickson. Malaysia.

Njikam, O. 2003. Trade Reform and Efficiency in Cameroon's Manufacturing Industries (Vol. 133). African Economic Research Consortium.

Obwona, M. 2006. Determinants of Technical Efficiency Differentials amongst Small and Medium Scale Farmers in Uganda: A Case of Tobacco Growers (Vol. 152). African Economic Research Consortium.

Oum, T.H. & Yu, C. 2012. Winning Airlines: Productivity and Cost Competitiveness of the World's Major Airlines. New York: Springer Science & Business Media.

Petrin, A., White, T.K. & Reiter, J.P. 2011. The impact of plant-level resource reallocations and technical progress on US macroeconomic growth. Review of Economic Dynamics 14(1): 3-26.

Sabli, M.A.N., Fahmy-Abdullah, M. & Sieng, L.W. 2019. Application of two-stage data envelopment analysis (DEA) in identifying the technical efficiency and determinants in the plastic manufacturing industry in Malaysia. International Journal of Supply Chain Management 8(6): 899-907.

Sami, J., Pascal, F. & Younes, B. 2015. Efficiency evaluation in public road transport: A stochastic frontier analysis. Transport 30(1): 1-14.

Sami, J., Pascal, F. & Younes, B. 2013. Public road transport efficiency: A stochastic frontier analysis. Journal of Transportation Systems Engineering and Information Technology 13(5): 64-71.

Stevens, P.A. & Kneller, R. 2003. Absorptive capacity and frontier technology: Evidence from OECD manufacturing industries. Royal Economic Society Annual Conference 2003 (No. 193). pp. 1-21.

Von Hirschhausen, C. & Cullmann, A. 2010. A nonparametric efficiency analysis of German public transport companies. Transportation Research Part E: Logistics and Transportation Review 46(3): 436-445.

Wu, S., Devadoss, S. & Lu, Y. 2003. Estimation and decomposition of technical efficiency for sugarbeet farms. Applied Economics 35(4): 471-484.

Yao, Y. & Zhang, Q. 2001. Analysis of Technical Efficiency in Chinese Industry. National Center for Economic Research, Tsinghua University, Working Paper, 200103.

Zahid, Z. & Mokhtar, M. 2007. Estimating technical efficiency of Malaysian manufacturing small and medium enterprises: A stochastic frontier modelling. The 4th SMEs in a Global Economy Conference. pp. 9-10.

 

*Pengarang untuk surat-menyurat; email: mohdfahmy@uthm.edu.my

 

 

 

sebelumnya