{"id":3489,"date":"2019-05-16T06:13:31","date_gmt":"2019-05-16T06:13:31","guid":{"rendered":"https:\/\/www.ukm.my\/selfuel\/?page_id=3489"},"modified":"2019-05-16T06:13:56","modified_gmt":"2019-05-16T06:13:56","slug":"publication-2018","status":"publish","type":"page","link":"https:\/\/www.ukm.my\/selfuel\/publication-2018\/","title":{"rendered":"Publication 2018"},"content":{"rendered":"
    \n
  1. A new method for the fabrication of a bilayer WO3\/Fe2O3 photoelectrode for enhanced photoelectrochemical performance Materials Research Bulletin<\/li>\n
  2. A review of key parameters for effective electrophoretic deposition in the fabrication of solid oxide fuel cells Journal of Zhejiang University: Science A<\/li>\n
  3. A review on production and characterization of biochars for application in direct carbon fuel cells Process Safety and Environmental Protection<\/li>\n
  4. A short overview current research of catalyst for methanol oxidation reaction in direct methanol fuel cell (DMFC) from experimental and theoretical aspect\u00a0Jurnal Kejuruteraan<\/li>\n
  5. A short review on the modeling of solid-oxide fuel cells by using computational fluid dynamics: assumptions and boundary conditions International Journal of Integrated Engineering<\/li>\n
  6. A short review on the proton conducting electrolytes for solid oxide fuel cell applications\u00a0Journal of Advanced Research in Fluid Mechanics and Thermal Sciences<\/li>\n
  7. Aplikasi keluli tahan karat sebagai elektrod logam di dalam sistem bioelektrokimia Jurnal Kejuruteraan<\/li>\n
  8. Aryl diazonium modification for improved graphite fiber brush in microbial fuel cell Sains Malaysiana<\/li>\n
  9. Carbon and non-carbon support materials for platinum-based catalysts in fuel cells International Journal of Hydrogen Energy<\/li>\n
  10. Challenges in fabricating solid oxide fuel cell stacks for portable applications: a short review International Journal of Integrated Engineering<\/li>\n
  11. Choline Chloride:urea based deep eutectic solvent as additive to proton conducting chitosan films Journal of Engineering Science and Technology<\/li>\n
  12. Comparison of performance and ionic concentration gradient of two chamber microbial fuel cell using ceramic membrane (CM) and cation exchange membrane (CEM) as separators Electrochimica Acta<\/li>\n
  13. Concurrent growth, structural and photocatalytic properties of hybridized C, N co-doped TiO2 mixed phase over g-C3N4 nanostructured Scripta Materialia<\/li>\n
  14. Constructing bio-templated 3D porous microtubular C-doped g-C3N4 with tunable band structure and enhanced charge carrier separation Applied Catalysis B: Environmental<\/li>\n
  15. Corrosion inhibition of cold-rolled low carbon steel with pulse fiber laser ablation in water Journal of Materials Engineering and Performance<\/li>\n
  16. Development of 2D multiphase non-isothermal mass transfer model for DMFC system Energy<\/li>\n
  17. Effect of H3 PO4 and KOH as the activating agents on the synthesis of low-cost activated carbon from duckweeds plants Jurnal Kejuruteraan<\/li>\n
  18. Effect of Modified Natural Filler O-Methylene Phosphonic kappa-Carrageenan on Chitosan-Based Polymer Electrolytes Energies<\/li>\n
  19. Effect of Temperature on the Mechanical Performance of Highly Conductive Composites for HT-PEMFC Application Jurnal Kejuruteraan<\/li>\n
  20. Effect of ZnO filler on PVA-alkaline solid polymer electrolyte for aluminum-air battery applications The Electrochemical Society Journals<\/li>\n
  21. Effect of carbon precursor and initial pH on cobalt-doped carbon xerogel for oxygen reduction International Journal of Hydrogen Energy<\/li>\n
  22. Effect of deep eutectic solvent in proton conduction and thermal behaviour of chitosan-based membrane Journal of Molecular Liquids<\/li>\n
  23. Effect of torrefaction and pyrolysis on the electrochemical reaction in direct carbon fuel cells Journal of Engineering Science and Technology<\/li>\n
  24. Effects of Nio loading and pre-calcination temperature on io-sdcc composite anode powder for low-temperature solid oxide fuel cells\u00a0Ceramics-Silik\u00e1ty<\/li>\n
  25. Effects of applied potential and reactants to hydrogen-producing biocathode in a microbial electrolysis cell\u00a0Frontiers in Chemistry<\/li>\n
  26. Effects of die configuration on the electrical conductivity of polypropylene reinforced milled carbon fibers: an application on a bipolar plate\u00a0Polymers<\/li>\n
  27. Effects of filler Size on the mechanical properties of polymer-filled dental composites: a review of recent developments\u00a0Journal of Physical Science<\/li>\n
  28. Effects of sintering temperature on the structural and electrochemical properties of SrFe0.5Ti0.5O3-d perovskite cathode\u00a0International Journal of Applied Ceramic Technology<\/li>\n
  29. Electrical and electrochemical characteristics of La0.6Sr0.4CoO3-d cathode materials synthesized by a modified citrate-EDTA sol-gel method assisted with activated carbon for proton-conducting Journal of Sol-Gel Science and Technology<\/li>\n
  30. Electrical conductivity models of die configuration for polypropylene-reinforced milled carbon fibre\u00a0Journal of Advanced Manufacturing Technology<\/li>\n
  31. Electrochemical characterisation of heat treated metal and non metal anodes using mud in microbial fuel cell\u00a0Sains Malaysiana<\/li>\n
  32. Electrochemical performance of sol-gel derived La0.6Sr0.4CoO3-d cathode material for proton-conducting fuel cell: A comparison between simple and advanced cell fabrication techniques\u00a0Processing and Application of Ceramics<\/li>\n
  33. Electrochemical sunset yellow biosensor based on photocured polyacrylamide membrane for food dye monitoring\u00a0Sensors<\/li>\n
  34. Electrode for proton exchange membrane fuel cells: A review\u00a0Renewable and Sustainable Energy Reviews<\/li>\n
  35. Elektrolit dwi lapisan bagi sel fuel oksida pepejal bersuhu sederhana-rendah: ulasan kajian\u00a0Jurnal Kejuruteraan<\/li>\n
  36. Enhanced biogas production from agro waste by Co-digestion with crude oil\u00a0Jurnal Kejuruteraan<\/li>\n
  37. Enhanced electrochemical performance of LSCF cathode through selection of optimum fabrication parameters\u00a0Journal of Solid State Electrochemistry<\/li>\n
  38. Enhanced hydrogen selectivity from catalytic decomposition of formic acid over FeZnIr nanocatalyst at room temperature\u00a0Research on Chemical Intermediates<\/li>\n
  39. Enhanced mechanical flexibility and performance of sodium alginate polymer electrolyte bio-membrane for application in direct methanol fuel cell\u00a0Journal of applied polymer science<\/li>\n
  40. Enhanced proton conductivity and methanol permeability reduction via sodium alginate electrolyte-sulfonated graphene oxide bio-membrane\u00a0Nanoscale Research letters<\/li>\n
  41. Enhancement in photocatalytic degradation of methylene blue by LaFeO3 -GO integrated photocatalyst-adsorbents under visible light irradiation\u00a0Korean Journal of Chemical Engineering<\/li>\n
  42. Experimental and DFT investigation on the influence of electron donor\/acceptor on the hydrogen bonding interactions of 1-(1,3-Benzothiazol-2-yl)-3-(R-Benzoylthiourea)\u00a0Sains Malaysiana<\/li>\n
  43. Experimental and theoretical study of Cu2 O photoelectrode and Cu2 O doped with Ag, Co, Ni and Zn metals for water splitting application\u00a0Jurnal Kejuruteraan<\/li>\n
  44. Fabrication process of cathode materials for solid oxide fuel cells\u00a0Journal of Advanced Research in Fluid Mechanics and Thermal Sciences<\/li>\n
  45. Facile preparation of ultra-low Pt loading graphene-immobilized electrode for methanol oxidation reaction\u00a0International Journal of Hydrogen Energy<\/li>\n
  46. Factors influencing thermal stress development in solid oxide fuel cells\u00a0Journal of Advanced Research in Fluid Mechanics and Thermal Sciences<\/li>\n
  47. Heat treatment effect on the phase and morphology of NiO-BCZY prepared by an evaporation and decomposition of solution and suspension method\u00a0Sains Malaysiana<\/li>\n
  48. Highly photoactive Cu2O nanowire film prepared with modified scalable synthesis method for enhanced photoelectrochemical performance\u00a0Solar Energy Materials and Solar Cells<\/li>\n
  49. Improved fermentability of pretreated glycerol enhanced bioconversion of 1,3-propanediol\u00a0Industrial and Engineering Chemistry Research<\/li>\n
  50. Improvement of colloidal stability in colloidal processing for highly translucent, nanosized zirconia Sains Malaysiana<\/li>\n
  51. In-depth understanding of core-shell nanoarchitecture evolution of g-C3N4@C, N co-doped anatase\/rutile: Efficient charge separation and enhanced visible-light photocatalytic performance\u00a0Applied Surface Science<\/li>\n
  52. Incorporation of thermally labile additives in carbon membrane development for superior gas permeation performance\u00a0Journal of Natural Gas Science and Engineering<\/li>\n
  53. Increasing the proton conductivity of sulfonated polyether ether ketone by incorporating graphene oxide: Morphology effect on proton dynamics.\u00a0Japanese Journal of Applied Physics<\/li>\n
  54. Influence of oxygen ion enrichment on optical, mechanical, and electrical properties of LSCF perovskite nanocomposite\u00a0Ceramics International<\/li>\n
  55. Influence of presintering parameters on the mechanical properties of presintered dental zirconia block\u00a0International Journal of Integrated Engineering<\/li>\n
  56. Influence of silver addition on the morphological and thermal characteristics of Nickel Oxide-Samarium Doped Ceria Carbonate (NiO-SDCC) composite anode\u00a0International Journal of Integrated Engineering<\/li>\n
  57. Influences of the processing method and sintering temperature on the translucency of polycrystalline yttria-stabilized tetragonal zirconia for dental applications\u00a0Ceramics International<\/li>\n
  58. Integrasi sistem penulenan biohidrogen dan aplikasi sel fuel\u00a0Jurnal Kejuruteraan<\/li>\n
  59. Interconnect development for solid oxide fuel cell application\u00a0Journal of Advanced Research in Fluid Mechanics and Thermal Sciences<\/li>\n
  60. Kajian elektrolit polimer berasaskan getah asli terubah suai (MG49) dalam sel suria terpeka pewarna\u00a0Sains Malaysiana<\/li>\n
  61. Kajian fotomangkin berasaskan grafin untuk penurunan karbon dioksida\u00a0Jurnal Kejuruteraan<\/li>\n
  62. Kenaf reinforced PLA composite thermoforming: a numerical simulation\u00a0International Journal of Integrated Engineering<\/li>\n
  63. Kesan pemendapan elektroforesis gam arab terhadap kakisan SS316 L dalam persekitaran asid\u00a0Jurnal Kejuruteraan<\/li>\n
  64. Kesan resonans plasmon aurum terhadap prestasi fotoelektrokimia fotokatod Cu2O\u00a0Sains Malaysiana<\/li>\n
  65. Mathematical modeling, simulation, and analysis for predicting improvement opportunities in the continuous catalytic regeneration reforming process\u00a0Chemical Engineering Research and Design<\/li>\n
  66. Molecular dynamics simulations of sodium alginate\/ sulfonated graphene oxide membranes properties\u00a0Heliyon<\/li>\n
  67. Morphological and physical behaviour on the Sm0.5Sr0.5CoO3-S\/Sm0.2 Ce0.8O1.9 incorporation with binary carbonate as potential cathode materials for SOFC\u00a0Key Engineering Materials<\/li>\n
  68. Morphological studies on the agglomeration of FeCo supported nitrogen-doped reduced graphene oxide catalyst prepared at varying annealing temperature\u00a0Jurnal Kejuruteraan<\/li>\n
  69. Nanocatalyst FeN4\/C molecular orbital behaviour for Oxygen Reduction Reaction (ORR) in Cathode Direct Methano Fuel Cell (DMFC)\u00a0Jurnal Kejuruteraan<\/li>\n
  70. Ni-based catalyst supported on Mesostructured Silica Nanoparticles (MSN) for Methanol Oxidation Reaction (MOR)\u00a0Jurnal Kejuruteran<\/li>\n
  71. Novel anodic catalyst support for direct methanol fuel cell: characterizations and single cell performances\u00a0Nano Research Letters<\/li>\n
  72. Numerical analysis of flow distribution behavior in a proton exchange membrane fuel cell\u00a0Heliyon<\/li>\n
  73. Optical, mechanical and electrical properties of LSCF-SDC composite cathode prepared by sol-gel assisted rotary evaporation technique\u00a0Journal of Sol-Gel Science and Technology<\/li>\n
  74. Optimization of energy management system for fuel-cell hybrid electric vehicles: issues and recommendations\u00a0Applied Energy<\/li>\n
  75. Overview of computational fluid dynamics modelling in solid oxide fuel cell\u00a0Journal of Advanced Research in Fluid Mechanics and Thermal Sciences<\/li>\n
  76. P-type Cu2ZnSnS4 as multifunctional material for photovoltaic and thermoelectric application: theoretical investigation\u00a0Jurnal Kejuruteraan<\/li>\n
  77. Passivated dye-sensitised TiO2 photoanode with conductive polymer with improved photocatalyst stability for photoelectrochemical application\u00a0Ionics<\/li>\n
  78. Penyediaan pelet elektrolit Sr0.6Ba0.4Ce0.9Ga0.1O3-d melalui kaedah glisina nitrat bagi aplikasi sel fuel oksida pepejal konduktor proton\u00a0Jurnal Kejuruteraan<\/li>\n
  79. Performance of a direct formic acid fuel cell fabricated by ultrasonic spraying\u00a0International Journal of Hydrogen Energy<\/li>\n
  80. Performance of crosslinked sodium alginate\/ sulfonated graphene oxide as polymer electrolyte membrane in DMFC application: RSM optimization approach\u00a0International Journal Of Hydrogen Energy<\/li>\n
  81. Performance of titanium-nickel (Ti\/Ni) and graphite felt-nickel (GF\/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells\u00a0Journal of the Taiwan Institute of Chemical Engineers<\/li>\n
  82. Perovskite-based mixed protonic-electronic conducting membranes for hydrogen separation: Recent status and advances\u00a0Journal of Industrial and Engineering Chemistry<\/li>\n
  83. Perovskite-based proton conducting membranes for hydrogen separation: A review\u00a0International Journal of Hydrogen Energy<\/li>\n
  84. Photocatalytic properties of two dimensional graphene and layered transition metal dichalcogenides based photocatalyst for photoelectrochemical hydrogen generation: an overview\u00a0International Journal of Hydrogen Energy<\/li>\n
  85. Physical properties optimization of POME-groundnut-naphthenic based graphene nanolubricant using response surface methodology\u00a0Journal of Cleaner Production<\/li>\n
  86. Platinum-based catalysts on various carbon supports and conducting polymers for direct methanol fuel cell applications: a review\u00a0Nanoscale Research Letters<\/li>\n
  87. Polymer-based approach in ceramic materials processing for energy device applications Academic Journal of Polymer Science<\/li>\n
  88. Polyol synthesis of reduced graphene oxide supported platinum electrocatalysts for fuel cells: Effect of Pt precursor, support oxidation level and pH International Journal of Hydrogen Energy<\/li>\n
  89. Preleminary study of alkalined Direct Ethanol fuel cell by using crosslinked quatinized Poly (vinyl alcohol) Grahene oxide membrane Jurnal Kejuruteraan<\/li>\n
  90. Preliminary study of alkaline direct ethanol fuel cell by using crosslinked Quaternized Poly (vinyl alcohol)\/Graphene oxide membrane Jurnal Kejuruteraan<\/li>\n
  91. Recent perspectives and crucial challenges on Unitized Regenerative Fuel Cell (URFC) Jurnal Kejuruteraan<\/li>\n
  92. Sifat serbuk dan sifat elektrik bahan katod La0.6Sr0.4CoO3-d yang disediakan melalui kaedah sol-gel terubahsuai bagi aplikasi sel fuel oksida pepejal Jurnal Kejuruteraan<\/li>\n
  93. Silica-related membranes in fuel cell applications: an overview International Journal of Hydrogen Energy<\/li>\n
  94. Simulation of PEMFC stack for portable power generator application Jurnal Kejuruteraan<\/li>\n
  95. Structural and Optical Properties Investigation on H-Bonded 1D Helical Self-Assembly of 1,1-Dibenzyl-3-(2-Bromobenzoyl)Thiourea Molecules for Nonlinear Optical Application Sains Malaysiana<\/li>\n
  96. Structural and morphological study of sulfonated graphene oxide prepared with different precursor Jurnal Kejuruteraan<\/li>\n
  97. Structural, optical and electrical properties of Ce0.8Sm0.2-xErxO2-d (x=0-0.2) Co-doped ceria electrolytes Ceramics International<\/li>\n
  98. Study on the physical and chemical composition of agro wastes for the production of 5-hydroxymethylfurfural Bioresource Technology<\/li>\n
  99. Supramolecular structures of rhenium(I) complexes mediated by ligand planarity via the interplay of substituents Acta crystallographica. Section C, Structural chemistry<\/li>\n
  100. Synthesis and characterization of Zn-doped LiCoO2 material prepared via glycine-nitrate combustion method for proton conducting solid oxide fuel cell application Jurnal Kejuruteraan<\/li>\n
  101. Synthesis, Structure and DFT study of a Rhenium(I) Pyridylpyrazole Complex as a Potential Photocatalyst for CO2 Reduction Sains Malaysiana<\/li>\n
  102. Synthesis, structure and spectroscopic properties of oxovanadium tris(3,5-dimethylpyrazolyl)borate aroylthiourea complexes Sains Malaysiana<\/li>\n
  103. Thermophysical properties of glycerol and polyethylene glycol (PEG 600) based DES Journal of Molecular Liquids<\/li>\n
  104. Titanate-based perovskites for photochemical and photoelectrochemical water splitting applications: a review\u00a0International Journal of Hydrogen Energy<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"

    A new method for the fabrication of a bilayer WO3\/Fe2O3 photoelectrode for enhanced photoelectrochemical performance Materials Research Bulletin A review of key parameters for effective …<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-3489","page","type-page","status-publish","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t