
SMS Research Team · UKM
Assoc. Prof. Ts. Dr. Mohd Shaiful Sajab
Ph.D. (Materials Science), P.Tech · Department of Chemical & Process Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia
Turning agricultural biomass and bio-based polymers into smart, sustainable materials, from 3D/4D-printing filaments and bioinks to sensors and circular-economy products.
World’s Top 5% Scientist 2026 IAAM Scientist Medal 2025 Professional Technologist (MBOT)
115
journal articles · 147 publications in total
25
h-index · 2,500+ citations
RM 4.08M
secured as Principal Investigator (16 grants)
RM 30.7M
total research funding involvement (52 projects)
60+
PhD, Master’s & BEng students supervised
15
IP filings incl. 7 patents · 1 UKM spin-off
About
Biography
Assoc. Prof. Ts. Dr. Mohd Shaiful Sajab is an Associate Professor in the Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM). He heads the Smart Material & Sustainable Product Innovation (SMatSPIn) University Research Group and the Smart & Sustainable Materials sub-area of the Research Center for Sustainable Process Technology (CESPRO).
His research sits at the meeting point of biopolymers and green conversion technology: converting agricultural biomass such as oil palm residues into cellulose, nanocellulose and lignin, and engineering bio-based polymers such as poly(butylene succinate) (PBS) into 3D/4D-printing filaments, bioinks, conductive composites and sensors. He has published more than 115 journal articles (h-index 25; 2,500+ citations), has secured over RM 4 million as Principal Investigator, and was named among the World’s Top 5% Scientists by SciRank in 2026.
He connects research with industry as Director of the UKM start-up Roobah Sdn. Bhd., with several patent filings on biomaterial inks and 3D-printing materials, and promotes 3D printing in STEM education through programmes such as 3DP STEAMulation and Professor@School.
Current roles
Head of Center of Excellent
Research Center for Sustainable Process Technology (CESPRO)
2026 – present
Head, University Research Group
Smart Material & Sustainable Product Innovation (SMatSPIn)
2026 – present
Director
Roobah Sdn. Bhd. (PEMULA@UKM)
2024 – present
Treasurer
Academic Research on Palm Oil Sustainability (ARPOS) Association
2016 – present
Research
Research themes
Four connected themes, from raw biomass to functional products and the classroom.
01
Green Biomass Conversion
Turning agricultural residues such as oil palm empty fruit bunch, kenaf and sago into cellulose, nanocellulose, lignin and carbon as high-value engineering resources.
Cellulose Lignin Carbon dots Biorefinery
36 publications · co-researcher in RM 22.6M of projects
02
Functionalized Biomaterials
Nanocellulose functionalization for water remediation, electrochemical sensors, microalgae cultivation and slow-release fertilizers.
Hydrogels Adsorbents Sensors Microalgae
68 publications · 8 PI grants (RM 717K)
03
Advanced Biopolymers & 3D/4D Printing
PBS synthesis and blends for 3D/4D printing and bioprinting, biomedical and orthopaedic implants, and ESD-safe electronic packaging.
PBS / PLA Bioprinting Orthopaedic implants ESD-safe
28 publications · RM 3.26M as PI
04
STEM Education
3D printing as a tool for sustainable, translational learning: co-designed kits and modules for schools, medical education and inclusive learning.
3DP STEAMulation Professor@School Inclusive learning
15 publications · 3 copyrighted modules
Funding
Research grants & projects
RM 4.08 million secured as Principal Investigator across 16 projects (RM 3.48M external), and a co-researcher in 36 more projects, consultancies and an endowment worth RM 26.6 million.
Current flagship projects
RM 2.74M
Functional application of sustainable bio-poly(butylene succinate) in additive manufacturing
MOSTI Technology Development Fund 2 (TED 2) · 2025 – 2028
RM 120K
Synergistic effects of SiO₂-crosslinked nanocellulose hydrogel and light intensity on microalgae cultivation via 3D bioprinting-electrospinning
Ministry of Higher Education (KPT) · 2026 – 2028
RM 30K
Quantum tunnelling composite electrospun fibres of PLA/PBS-PU/graphene
Wuhan Xuelong Tech., China (international) · 2025 – 2026
All Principal Investigator projects (16)
| Project | Funder | Period | Allocation |
|---|---|---|---|
| Synergistic Effects of SiO2-Crosslinked Nanocellulose Hydrogel and Light Intensity on Microalgae Cultivation via 3D Bioprinting-Electrospinning | KPT | 2026–2028 | RM 120,000 |
| Development of Quantum Tunneling Composite Electrospun Fibers of PLA/PBS-PU/graphene (KK-2025-024) | Wuhan Xuelong Tech., China | 2025–2026 | RM 30,000 (RMB 26,000) |
| Functional application of sustainable bio-poly(butylene succinate) in additive manufacturing (TEF08241295) | MOSTI | 2025–2028 | RM 2,739,665 |
| High selectivity of 3D printed internal microchannel hydrogel through laser-induced graphene for microfluidic devices and sustainable sensor (GUP-2024-063) | RU Fund | 2024–2026 | RM 70,000 |
| 3DP STEAMulation Programme (KK-2024-008) | RMK-12 | 2024–2026 | RM 25,000 |
| Miniature-scale cultivation of microalgae in 3D printed nanocellulose/SiO2-based hydrogel (DIP-2023-002) | RU Fund | 2023–2024 | RM 100,000 |
| Tunable Bio-Poly(Butylene Succinate) Nanocomposite for Sustainable Additive Manufacturing (TDF05211384) | MOSTI | 2021–2023 | RM 369,200 |
| Conductive 4D printing bio-based filament for electrochemical sensing device on the presence of food contaminants (GUP-2021-018) | RU Fund | 2021–2023 | RM 70,000 |
| Miscible biopolymer blends of polybutylene succinate-nanocellulose/lignin for interlayer and direct extrusion 3D printing (UKM-YSD-2021-006) | UKM-YSD | 2021–2022 | RM 25,000 |
| A new integrated liquid printing-electrospinning for the tunable structures of nanoscale 3D printed biopolymer (DIP-2020-006) | RU Fund | 2020–2022 | RM 100,000 |
| Translational education through industrial design and prototyping facility (PDI-2021-007) | Education UKM | 2021–2022 | RM 10,000 |
| Nanocellulose-reinforced photocatalytic thin films for antimicrobial surface coating (RU-2019-004/4) | KPT | 2019–2021 | RM 72,000 |
| A facile method for fractionation lignin and nanocellulose from lignocellulosic biomass as compatible reinforced stereolithography materials (GUP-2018-104) | RU Fund | 2018–2020 | RM 60,000 |
| Electrochemical behaviors of 3-chloropropane-1,2-diol at boron-doped graphene presence in palm oil-water emulsion (FRGS/1/2018/TK10/UKM/02/2) | KPT | 2019–2020 | RM 91,000 |
| Telescoping synthesis of cellulose-calcium carbonate as hybrid nanocrystals for pH responsive-controlled uptake and release application (DIP-2017-017) | RU Fund | 2017–2019 | RM 150,000 |
| Preparation of bifunctional graphene oxide-Fe(III) for removal of lignin and phenolic derivatives in cyclic of adsorption and Fenton-oxidation system (GGPM-2016-025) | RU Fund | 2016–2018 | RM 45,000 |
Co-researcher projects (35), consultancy & endowment
| Project | Funder | Period | Allocation |
|---|---|---|---|
| Influence Of Physicochemical Characteristics Of Mined Landfill Waste On Energy Applications (KK-2026-003) | BIM Syncro Engineers Sdn. Bhd. | 2026–2027 | RM 10,000 |
| Unveiling Symbiotic Mechanisms in Co-cultivation of Black Soldier Fly Larvae and Freshwater Microalgae for Lauric Acid (FRGS/1/2025/TK05/UKM/02/2) | KPT | 2025–2028 | RM 185,550 |
| Development of an Integrated Raman-Machine Learning Framework for Rapid, Non-Destructive Detection of MOSH/MOAH Contaminants in Palm Oil (GUP-2025-041) | RU Fund | 2025–2027 | RM 60,000 |
| Development of Novel Functional and Composite Materials Training Module (KK-2025-023) | Northwest Minzu University, China | 2025–2026 | RM 58,000 |
| Kinetik dan mekanisme pelepasan terkawal dipiridamol dari gentian nano hibrid biopolimer dan polimer sintetik bagi peningkatan kecekapan penghantaran ubat (FRGS/1/2024/TK09/UKM/02/1) | KPT | 2024–2026 | RM 102,200 |
| Green Chemical Recycling of Polyethylene Terephthalate (PET) Plastics via Glycolysis Catalyzed by Deep Eutectic Solvents under Microwave Irradiation. (GUP-2024-074) | RU Fund | 2024–2026 | RM 70,000 |
| Comprehensive algal cell wall physico-chemical characterisation for enhanced physical-mechanical and thermal algal biomass disruption (KK-2024-024) | PRSB Sdn. Bhd. | 2024–2026 | RM 317,836 |
| Understanding structure-catalytic activity relationship for PET hydrolysis using phenolic- and metal-based deep eutectic solvents under microwave irradiation. (FRGS/1/2023/TK05/UKM/02/5) | KPT | 2023–2026 | RM 153,500 |
| Elucidating Mechanism of Electricity Assisted Anaerobic Co-digestion of Palm Oil Mill Effluent and Palm Oil Empty Fruit Bunch for Augmentation of Biogas Productivity (FRGS/1/2023/TK08/UKM/02/4) | KPT | 2023–2026 | RM 127,300 |
| Synergistic compounding of pineapple peel and food waste biomass for bio-based controlled-release fertilization (GUP-2023-029) | RU Fund | 2023–2025 | RM 70,000 |
| Menghubungkan Komuniti dan Universiti dalam Memelihara Biodiversiti dan Mempromosi Kehidupan Lestari (KK-2022-003) | Selangor | 2022 | RM 8,345 |
| Pembangunan sistem penggredan pintar bagi buah kelapa sawit segar (INOVASI-2021-007) | Inovasi | 2022–2023 | RM 100,000 |
| A non-destructive oil palm phenotyping approach using biomarkers derived from the Raman spectra for plant health monitoring (GUP-2022-025) | RU Fund | 2022–2025 | RM 70,000 |
| Pendidikan Perubahan Iklim: Ketahanan dan Peranan Teknologi Pintar (KK-2022-005) | Selangor | 2022 | RM 8,000 |
| Water recovery from domestic wastewater using hybrid biofilm carriers reactor (DIP-2021-008) | RU Fund | 2021–2023 | RM 100,000 |
| A new three-dimensional (3D) printing of an in situ grown MOF hydrogel for sensing volatile organic compounds (VOCs) (GGPM-2021-012) | RU Fund | 2021–2024 | RM 40,000 |
| Systematic investigation of physicochemical and antimicrobial behavior of silver decorated graphene oxide embedded membrane feed spacer (FRGS/1/2021/TK0/UKM/02/41) | KPT | 2021–2024 | RM 114,000 |
| Exposition of an In-Situ Reductant for Resource-efficient Fractionation of Sago Bark in Horizontal Alkaline Oxidation Fractionator (FRGS/1/2021/TK0/UKM/02/10) | KPT | 2021–2025 | RM 211,500 |
| Block Copolymer-Polyesters Nanoparticles Derived from Palm Oil for Effective Drug Delivery Carriers (DIP-2019-012) | RU Fund | 2019–2022 | RM 100,000 |
| Biodegradable Growing Media with Slow Release Fertilizer and Free Watering System (LRGS/1/2019/UKM-UKM/5/1) | KPT | 2019–2024 | RM 1,209,200 |
| Chemical modification of cellulose with EDTA via microwave assisted and Gamma irradiation technique (FRGS/1/2018/STG07/UKM/01/1) | KPT | 2019–2021 | RM 100,000 |
| Water recovery from domestic wastewater using hybrid biofilm carriers reactor (DIP-2021-008) | RU Fund | 2019–2022 | RM 96,651 |
| Development of a Compact Integrated Solution System for Sustainable Wastewater Reclamation from Malaysian Industries (KK-2019-001) | KPT | 2018–2022 | RM 450,000 |
| Improving Malaysian HE Knowledge towards a Wood and Furniture Industry 4.0 – MAKING4.0 (ST-2019-001) | ERASMUS+ | 2018–2022 | RM 637,789 |
| Synergistic Effects of Silver-Graphene Oxide Nanocomposite and Cellulose Nanofibril Aerogel for Enhancement of Antibacterial Performance (FRGS/1/2016/STG07/UMK/03/2) | KPT | 2016–2019 | RM 95,200 |
| Cellulose nanocomposite containing silver nanoparticles and graphene oxide for environmental remediation (DIP-2015-009) | RU Fund | 2016–2017 | RM 150,000 |
| Biological phenolic glass fibre composites for front rear coach (PRGS/1/2015/SG06/UKM/01/1) | KPT | 2015–2017 | RM 154,200 |
| Formulation of inert microalgae enriched-live prey zooplankton for prawn post-larvae feed. (GUP-2018-092) | RU Fund | 2018–2021 | RM 40,000 |
| Enhancing the Mesoporous Silica Nanoparticles by Modification with poly(methylacrylic acid)(PMAA) for a Greater Stimuli Responsive Anti-Cancer Drug Carrier (GUP-2018-046) | RU Fund | 2018–2021 | RM 60,000 |
| Green synthesis of thermo-responsive bio-cellulose hydrogel facial mask from oil palm empty fruit bunch (GUP-2017-098) | RU Fund | 2017–2021 | RM 70,000 |
| Towards An Alternative Extraction Process for Palm Oil: Role of Cell Wall Degrading Enzymes In Enhancing Oil Recovery During Aqueous Extraction of Palm Oil (FRGS/1/2017/TK02/UKM/01/1) | KPT | 2017–2020 | RM 86,700 |
| Palm Oil Mill Biogas Reactor Effluent Concentration for Production of Organic Fertilizer and Water Reclamation using an Integrated Forward Osmosis Membrane Process (DIP-2016-031) | RU Fund | 2016–2019 | RM 150,000 |
| Role of Ammonia and Pretreatment Conditioning Processes on Inhibitor Production: Inhibitory Effect and Tolerance In Downstream Processes (FRGS/1/2016/TK02/UKM/02/4) | KPT | 2016–2019 | RM 114,000 |
| Phycoremediation of Palm Oil Mill Effluent (DPP-2015-050) | RU Fund | 2015–2016 | RM 9,000 |
| Advanced Integrated Separation Technologies for Downstream Processing of Sugar-Based Products and Fine Chemical Precursors (LRGS/2013/UKM-UKM/PT/03) | KPT | 2014–2017 | RM 3,476,340 |
| Kajian Bancian Industri Perkayuan Negara (national timber industry census) | Consultancy | 2017–2018 | RM 2,467,828 |
| JICA Verification Survey: Japanese wastewater treatment technology using natural limonite and kenaf | Consultancy (JICA) | 2017–2019 | RM 414,622 |
| UKM-SDR Zero Waste Technology | Endowment (co-researcher) | 2011 – ongoing | RM 15,000,000 |
Collaboration agreements
| Agreement | Partner | Period | Role |
|---|---|---|---|
| MOA – Technology Development Fund 2 (TED 2) | Ministry of Science, Technology & Innovation (MOSTI) | 2025–2028 | Lead researcher |
| MOU – 3D Printing Technology | Pebble3D Sdn. Bhd. | 2023–2028 | Lead researcher |
| MOU – Biomass technology research | Thailand Institute of Scientific and Technological Research (TISTR) | 2023–2026 | Co-researcher |
| MOA – Technology Development Fund 1 (TED 1) | Ministry of Science, Technology & Innovation (MOSTI) | 2021–2023 | Lead researcher |
| MOA – Autonomous agriculture | Palm Techno Ventures Sdn. Bhd. (PTV) | 2020–2021 | Co-researcher |
Innovation
Innovation, IP & commercialisation
Bridging laboratory research and the market, with patents on biomaterial inks and 3D-printing materials and a UKM spin-off company.
UKM spin-off
Roobah Sdn. Bhd.
A PEMULA@UKM start-up, led by Dr. Shaiful as Director since December 2024, that carries the group’s biomaterial-ink and 3D-printing know-how into products and education for the circular economy.
7
patents filed
2
utility innovations (1 granted)
5
copyrights
1
trademark
Intellectual property portfolio (15)
| Title | Type | Application / grant no. | Date |
|---|---|---|---|
| Conductive Biopolymer Composite Films, Methods of Making Same, And 3D-Printed Electrode Sensors Thereon | Patent | PI2025008545 | 30 Dec 2025 |
| A Method for Preparing a Biodegradable Polymeric Material Applicable for Use in Producing an Article | Utility Innovation | UI2025008182 | 23 Dec 2025 |
| Method for Synthesizing a Biodegradable Fertilizer Nanocomposite with Controlled Nutrient Release Using Modified Cellulose Nanofibers from Pineapple Peel and Food Waste-Based Nutrients | Patent | PI2025007353 | 26 Nov 2025 |
| Arus Mampan | Copyright | 7 Oct 2025 | |
| Kinetic Vision | Copyright | 25 Aug 2025 | |
| Real2Replica | Copyright | 25 Aug 2025 | |
| GreenPlate | Copyright | 21 May 2025 | |
| 3DP STEAMulation Module | Copyright | 23 Jan 2025 | |
| Method for Preparing Biomaterial Ink (Biomaterials Ink from Agricultural Biomass for 3D and 4D Printing Technology) | Patent | PI2024007620 | 27 Dec 2024 |
| A Bioink Composition for Three-Dimensional (3D) Bioprinting of a Structure for Use in the Cultivation of Chlorella Vulgaris | Patent | PI2024006634 | 21 Nov 2024 |
| Method for preparing 3D Printing Filament | Patent | PI2024004046 | 10 July 2024 |
| Biological polyurethane for slow release fertiliser | Patent | PI2024002743 | 9 May 2024 |
| Graphene-modified ceramic membrane for microalgae harvesting and water treatment | Patent | PI2024002257 | 18 Apr 2024 |
| Open ended Laboratory (OEL) | Trademark | LY2021E06025 | 13 Dec 2021 |
| A Superabsorbent Based Polymeric Material | Utility Innovation | UI2017702303 | 9 Oct 2020 |
Innovation medals (6)
- Gold award (2025): 3 Minutes Research and Innovation Competition (3MRIC 2025)
- Gold award (2025): International Conference on Sugar Palm and Natural Fibre Polymer Composites (ICSP-NFPC 2025)
- Silver medal (2020): IIDEX2020 3D Printed Nanocellulose Composites for Controlled Drug Delivery
- Silver medal (2017): SIRIM Invention, Innovation and Technology Expo
- Silver medal (2014): ITEX 2014: Graphene Oxide Cellulose Beads
- Silver medal (2013): i-INOVA 2013: Oil Palm Adsorbent for Water Remediation
Recognition
Awards & recognition
2026 World’s Top 5% Scientist
SciRank Global
2026 Project Champion
Ministry of Higher Education, Malaysia
2025 Advanced Materials Scientist Medal
International Association of Advanced Materials (IAAM)
2025 Gold Award, 3 Minutes Research & Innovation Competition (3MRIC)
2025 Gold Award, ICSP-NFPC 2025
Int. Conf. on Sugar Palm & Natural Fibre Polymer Composites
2024 Professor@School
Universiti Kebangsaan Malaysia
2022 Excellent Service Award
Universiti Kebangsaan Malaysia
2021 MyRA Excellence Award
Universiti Kebangsaan Malaysia
2019 Excellent Service Award
Universiti Kebangsaan Malaysia
2014 Graduate on Time (Ph.D.)
Universiti Kebangsaan Malaysia
2012 MyPhD Scholarship
Ministry of Higher Education, Malaysia
Team
Research team & supervision
Supervising and mentoring a diverse team of local and international postgraduate and undergraduate researchers.
21
Ph.D. candidates (8 main, 13 co-supervised)
18
Master’s students (M.Sc., M.Eng., M.Med.)
29
B.Eng. final-year projects
11
inbound & outbound mobility students
Student achievements
- 1st Runner Up – Siti Aisyah Syazwani (2026): Design for Plastics Circularity Challenge (DPCC) 2026
- Best Presenter Award – Siti Aisyah Syazwani (2026): International Conference on Sustainable Engineering & Advance Techology (INCFUSE)
- Best Poster Award – Zhang Dong (2026): FKAB Postgraduate Colloqium 2026
- 1st Prize Best Thesis Award – Wan Nazihah Liyana (2026): Best Thesis Award (Ph.D Category) Malaysian Society of Agricultural & Food Engineers (MSAE)
- Award – Wan Nazihah Liyana (2025): Hadiah Buku Inovasi MTDC, Universiti Kebangsaan Malaysia
More student achievements (6)
- 1st Prize Winner – Muhammad Alif, You Jen Xian, Zhang Dong (2025): Sustainability Challenge 2025
- Best Presenter – Wan Nazihah Liyana (2024): International Conference of Materials and Advances Science (IConMAS 2024).
- Champion – Muhammad Alif, Siti Aisyah, Wan Nazihah, Noor Fadhilah (2023): KPS Ekovative Challenge 2023
- 1st Prize Winner – Wan Nazihah Liyana (2021): Nanotechnology Innovation Research (PIN) 2022 organized by Ministry of Science and Technology (MOSTI)
- Semi Final – Siti Aisyah, Wan Nazihah Liyana (2022): APEC-ACABT Training Program on Green Synergy Solutions for Sustainable Community on Agriculture Residue Based Energy and Circular Economy 2022
- Best Presenter – Denesh Mohan (2020): 2nd Postgraduate Symposium on Industrial Science and Technology (SISTEC 2020)
Ph.D., main supervisor (8)
- Dr. Muhammad Alif Fitri Bin Hanipa: Pembangunan Komposit Poli(Asid Laktik) / Poli(Butilena Suksinat) – Hidroksiapatit Untuk Pencetakan 3D Implan Ortopedik Boleh Terserap Semula graduated 2025/26
- Dr. Noor Fadhilah Binti Rahmat: Pembangunan Biopolimer Konduktif Cetakan 3D Untuk Peranti Elektronik Fleksibel graduated 2024/25
- Dr. Wan Nazihah Liyana Binti Wan Jusoh: Penghasilan Dakwat Hidrogel Selulosa Bagi Biopencetakan 3D Pengkulturan Mikroalga Chlorella vulgaris graduated 2024/25
- Dr. Denesh Mohan: Peninjauperiksaan Polimer Berasaskan Bio Daripada Lignin dan Selulosa Sebagai Bahan Pembuatan Bahan Tambahan graduated 2020/21
- You Jen Xian: Electrospun Nanofibers for Sciatic Nerve Regeneration ongoing
- Yang Mingxiao: PBS-Carbon based Biocomposites For 3D Printing Application ongoing
- Siti Aisyah Syazwani Binti Zaidi: Synthesis of Co-Polymerization PBS and PLA for Additive Manufacturing ongoing
- Zhang Dong: PLA-PBS Biomaterials for Food Packaging Industry ongoing
Ph.D., co-supervisor (13)
- Dr. Tiang Ming Foong: Exploring the Potentials of Biomass Waste-Derived Multifunctional Carbon-Based Quantum Dots via a Facile Single-Step Hydrothermal Synthesis graduated 2025/26
- Dr. Nur Fathihah Binti Jafri: Penghasilan dan Pencirian Hidrogel Selulosa Terjana Semula Yang Ditambah Bebenang Selulosa Karboksimetil-Kitosan Dan Dibenam Di Dalam Larutan Nutrien Urea-Hidroksiapatit graduated 2024/24
- Dr. Jannatulhawa Jasni: Aplikasi Biojisim Mikroalga Pencilan Tempatan Sebagai Sumber Makanan Akuatik Yang Lestari graduated 2021/22
- Dr. Noorakmar Hidayah Mohamed Hashini: The Development of an Oil Recovery System to Increase Palm Oil’s Extraction Rate graduated 2024/24
- Dr. Maha Mohammad Hussein Al-Rajabi: Hidrogel Selulosa Termo-Responsif Tersintesis Daripada Tandan Kosong Kelapa Sawit Untuk Penghantaran Ubat Topikal graduated 2021/22
- Dr. Nur Fazlinda Razali: Penyahwarnaan Metilena Biru Dan Efluen Kilang Minyak Kelapa Sawit Melalui Proses Pengoksidaan Fenton Menggunakan Limonit Sebagai Pemangkin graduated 2020/21
- Dr. Kushairi Mohd Salleh: Pencirian Hidrogel Dan Kriogel Yang Dijana Daripada Selulosa Tandan Kosong Kelapa Sawit dan Terbitan Selulosa graduated 2019/20
- Dr. Mohammad Jani Saad: Penghasilan Karbon Teraktif Daripada Sisa Padi Melalui Proses Karbonisasi dan Aktivasi Kimia Sebagai Bahan Penjerap Cecair Berwarna graduated 2020/21
- Dr. Yang Chia Yan: Titanium Dioxide and its Nanocomposites for Organic Dye Decomposition via Photocatalytic Activity. graduated 2018/19
- Nik Nurul Nazipah Binti Ab Alim: Biobased Polymer for Production of 3D Printing Filament ongoing
- Azuan Abdul Latif: Biopenukaran Bagi Buah Tandan Kosong Yang Menggunakan Perawatan Ammonia Kontang ongoing
- Bazlee Bin Abu Bakar: Biosuccinic Acid Production from Oil Palm Trunk ongoing
- Nur Zahidah Binti Nasoha: Microalgae Fuel Cell Optimization ongoing
M.Sc., main supervisor (5)
- Siti Aisyah Syazwani Binti Zaidi: Penghasilan Dan Pencirian Biokomposit Adunan Daripada Polilaktik Asid dan Polibutilena Suksinat Bagi Bahan Pencetakan 3D graduated 2023/24
- Jude Santanaraj Dulasidas: Inhibitors Removal In Hydrolysate Lignocellulose graduated 2017/18
- Asswin A/L Veerapatran: PBS-Carbon 3D Printing Filament for ESD Safe Materials ongoing
- Yang He: Electropsun Biopolymer for Active Food Packaging ongoing
- Nur’Ain Binti Habep: Electrospun Cellulose-based Materials ongoing
M.Sc., co-supervisor (4)
- Wan Nur Syuhada Wan Ata: Membran Komposit Filem Nipis Dengan Penambahan Oksida Grafin/Kitosan untuk Aplikasi Osmosis Kedepan graduated 2019/20
- Nur Syazaliyana Azali: Modifikasi Silika Berliang Meso (MSN) Dengan Poli(2- Vinilpiridina)(PVPDINE) Dan Poli(Vinilpirolidona) (PVPDONE) Untuk Tindak Balas Ransangan Terhadap Ubat 5-Florourasil (5-FU) graduated 2020/21
- Wan Aimran Bin Wan Badaruddin: Optimization of Polymer Degradation using Green Solvent ongoing
- Mohammad Aqil Mirza Bin Razali: Pembangunan Campuran Polilaktik Asid (PLA)/ Polikaprolakton (PCL) Diperkukuh dengan Nanohablur Selulosa (CNC) untuk Aplikasi Percetakan 4D ongoing
Master of Medicine, co-supervisor (3)
- Dr. Terence Chin: Biomechanical properties of PLA/ PBS-based implants for Paediatric Fracture Fixation ongoing
- Dr. Khairulanwar Ab Wahab: Finite Element Analysis of Load Distribution and Stress Concentration in PLLA/PBS/HA Composite Orthopaedic Screws and Plates ongoing
- Dr. Amir Hamzah Bin Zulkefli: Clinical Outcomes of 3D-Printed Biopolymer Implants in Pediatric Orthopaedic Surgery:A Systematic Review ongoing
M.Eng., main supervisor (5)
- Li Shengming: Lifecycle Assessment of Polybutylene Succinate (PBS) Biopolymer as a Sustainable 3D Printing Material graduated 2025/26
- Nur Fatin Khairullah: Slow Drug Release of 5-fluorouracil graduated 2021/22
- Wan Nabilah Manan: Modification of graphite electrode for 3-MCPD determination graduated 2021/22
- Mohamad Taufiq Jaafar: Determination of Oil Extraction Rates of Mesocarp graduated 2017/18
- Wan Nurmawaddah Wan Abdul Rahman Jauhari: Modification of Lignocellulose for Oil-Water Separation graduated 2016/17
B.Eng. final-year projects (29)
- Elvin Ee Ding Yang: Ricihan Hidrodinamik bagi Penghasilan Nanofibril Selulosa dalam Sistem Homogenisasi Gelung Selanjar ongoing
- Dhanuissh A/L Suryarow: Pemfungsian Filem Elektropintal Biopolibutilena Suksinat Nanokomposit sebagai Pembungkusan Elektronik ongoing
- Elly Syazreeq Binti Shaari: Lignin-Based Nanocarbon as a Functional Filler in the Fabrication of Antistatic Materials graduated 2025/26
- Phoebe Chong Hui: PBS-PLA Copolymerization for Highly Flexible Bioplastic Production graduated 2025/26
- Chia Kuan Shun: Synthesis and Characterization of PLA/PBS Electrospun Fibers for Curcumin Drug Delivery graduated 2024/25
- Chong Jia Min: Fabrication of 3D Printed Resistance Humidity Sensor based on Thermoplastic Starch (TPS) and Graphene Nanoplatelets (GNP) graduated 2024/25
- Syed Uqail Bin Syed Ahmad Faiz: Biopolymer-Based 3D Printing for the Fabrication of Porous Biodegradable Orthopedic Screws graduated 2024/25
- Siti Aisyah Binti Mohd Radzuan Hairi: 3D Printed Biopolymer Functionalization for Smart Food Packaging graduated 2023/24
- Tang Yi Shen: 3D Printing of Bioactive Materials as Scaffolds for Medical Devices graduated 2023/24
- Alia Nuraisyah Binti Abdul Rahman: PLA-PCL as Stimuli-Responsive Material in 4D Printing for Biomedicine graduated 2023/24
- Yeap Shiven: Biocompatibility Potential of 3D Printing Material Biocomposites graduated 2022/23
- Grace Toh Jia Ern: Nanocellulose Hydrogel as a Biomaterial Ink for Bioprinting graduated 2022/23
- You Jen Xian: 3D Printing Biopolymers via Simultaneous Copolymerization Synthesis graduated 2022/23
- Cham Eng Kwan: Improving the Adherence of 3D Printing through Integration of Thermochemical Properties of Lignin graduated 2021/22
- Chan Sin Leng: Monitoring of Quantity and Quality of Ripe Oil Palm Fruitlets Harvesting graduated 2021/22
- Chen Wei Xin: Chemical Sensors and Biosensors Using Multipurpose 3D Printing graduated 2021/22
- Muhammad Ridzwan Lubis Fahrudin Lubis: Graphene Oxide-Modified Mesoporous Silica Nano Particles for Adsorption and Release of Epirubicin graduated 2020/21
- Poongkulali A/P Y Nadarajan: Determination and Mitigation of Chlorine the Precursor of 3-MCPD in Vegetable Oil Especially Palm Oil graduated 2020/21
- Nur Haflia Safika Sahari: Nano Fiber Structure Control Using Integration Between 3D Printing & Electrospinning graduated 2020/21
- Teo Tzyy Ling: 4D Bioprinting in Microalgae Hydrogel System graduated 2020/21
- Teong Zee Khai: The Potential of Naocellulose-Graphene Nanocomposite as 4DPrinted graduated 2019/20
- Vincent Tiang Soon Thai: Food Contamination Monitoring in Palm Oil Processing graduated 2019/20
- Afifah Nabilah Bakir: Production of Biocomposite Filament with Lignin as Biofiller for 3D Printing graduated 2019/20
- Fathirrahman Ibrahim: Compatibility of Organic Solvent Extracted Lignin Into Polyurethane Resin in 3D printing graduated 2018/19
- How Yan Ping: Nanocomposite of Cellulose and Calcium Carbonate as Medium in Drug Delivery System graduated 2018/19
- Nur Khairunnisa Ahmad Zukni: Determination of 3-MCPD using Electrochemistry Method graduated 2018/19
- Nidzam Alauddin Zainal Abidin: Production of CNF from Oil Palm Empty Fruit Bunch Fibers graduated 2017/18
- Divyamalar Lengatharan: Degradation of dye using zerovalent iron (ZVI) graduated 2016/17
- Wan Nur Qurratu ‘Ainie Wan Manan: Discoloration of anaerobic POME using modified empty fruit bunch fibers (EFB) graduated 2016/17
Publications
Publications
Journal articles listed newest first with DOI links and PDF copies. Click a year to expand.
115 journal articles 67 as main author 62 in Q1/Q2 journals 26 proceedings 11 books & chapters 8 popular articles & media
2026 · 18 articles
- Akla, S. A. S., Azli, A. U. F., Anhar, N. A. H. K., Sajab, M. S., Idris, F. M., & Kaco, H. (2026). A mixed-methods study of school students as trendsetters on co-designing 3D-printed kits for interdisciplinary STEM education. Journal of Interdisciplinary Studies in Education, 15(8). Scopus DOI · PDF
- Sohif, H. N., Manshor, H., Hatta, M. A. M., Sajab, M. S. (2026). Tailoring mechanical and functional properties of Thermoplastic Polyurethane (TPU) filaments for additive manufacturing: A review of blends and additives. Polymer Bulletin. 83(12), 681 Q2 JCR DOI · PDF
- Baini, R., Sajab, M. S., Yakub, I., Abang, S., & Rao, S. R. R. (2026). Photocatalytic Kinetics of Sago Wastewater Using Titanium Dioxide. ASEAN Journal of Chemical Engineering, 26(2), 340-354. Scopus DOI · PDF
- You, J. X., Chia, K. S., Chia, C. H., Ding, G., & Sajab, M. S. (2026). Physicochemical Evaluation of Electrospun Polyvinyl Alcohol/Keratin/Curcumin Nanofibers. Bioresources, 21(4), 10560-10574. Q2 JCR PDF
- Jusoh, W.N.L.W., Ern, G.T.J., Yasin, N.H.M., Abdul, P.M. and Takriff, M.S., Sajab, M.S., (2026) Microalgae Cultivation (Chlorella vulgaris) within Nanocellulose-based Biomaterial Ink for 3D Bioprinting. Bioresources, 21(4), 9761-9779. Q2 JCR PDF
- Qian, Z., Feng, H., Meng, K., Chen, X., Chang, Z.H., Yan, G., Cheng, J., Sajab, M.S., Abdul, P.M., Ding, G. and Wang, Y., (2026). Green Fabrication of Keratin Nanoparticles from Yak Horn by Steam Flash Explosion: Structure–Property Evolution.Biomolecules,16(7), p.1044. Q1 JCR DOI · PDF
- Ge, Z., Guowang, C., Sajab, M.S., Zifan, W., Lei, Z., (2026). Preparation of the nitrogen-doped yak hair biomass composite carbon dots and their application in strawberry preservation.Acta Materiae Compositae Sinica,44(6), 1-15. Scopus PDF
- Kaco, H., Hamdan, A.F.A., Hafiz, H.H.H. and Sajab, M.S., (2026). Surface Modification of Silane-functionalized Cellulose Aerogel for Effective Oil-Water Separation.Journal of Advanced Research in Applied Sciences and Engineering Technology,58(5), pp.1-12. MyCite DOI · PDF
- Izharruzzahir, N.N., Anuar, K.I.B.K., Rahman, T.N.A., Idris, F.M., Sajab, M.S., Kaco,H. (2026). Bridging the Gap in STEM Education by Visualizing Physics Concepts with 3D Printing. Journal of Advanced Research in Social and Behavioural Sciences, 43, 183-192. MyCite DOI · PDF
- Shah, M.H.M.I., Zin, D.M.M., Sajab, M.S., Kaco,H. (2026). Enhancing Anatomical Understanding in Medical Education through Integrated 3D Printing Technology Modules. Journal of Advanced Research in Social and Behavioural Sciences, 43, 158-168. MyCite DOI · PDF
- You, J. X., Chia, K. S., Chia, C. H., Ding, G., & Sajab, M. S. (2026). Evaluation of blended and dual-nozzle electrospun PLA/PBS nanofibers for hydrophobic drug adsorption–desorption behaviour.Journal of Materials Science, 61, 16126-16139. Q2 JCR DOI · PDF
- Lau, K. S., Zhong, J. L. H., Vincent, J., Chia, C. H., Sajab, M. S., & Haan, T. Y. (2026). Zwitterionic Polyvinyl Alcohol Hydrogel Membranes for Membrane Capacitive Deionization: Kinetics and Capacitive Behavior.Journal of Environmental Chemical Engineering, 122837. Q1 JCR DOI · PDF
- Rahmat, N.F., Radzuan, M.S.A., Afdzaluddin, A.M., Chia, C.H. and Ding, G. and Sajab, M.S., Graphene-Starch based Electrodes for Flexible Sensing Applications. Bioresources, 21(1), 1050–1064. Q2 JCR DOI · PDF
- Kaco, H., Hussin, N.J.A., Shah Lail, S.N., Sajab, M.S., Mohd Rozi, N.S., Hamdan, M.N. & Mohd Naim, A.M., (2026). Study of the Structural Property and Biodegradation Relationship of Regenerated Cellulose Nanofibre/Glycerol Laminated Films Incorporating Recycled PLA Waste. Scientific Research Journal. 23(1), 54 – 69 MyCite DOI · PDF
- Abdullah Amru Indera Luthfi, Juhari, M.H.S., Md Saleh, N., Abdul, P.M., Mat Salleh, M.Z., Ahmad, K.N., Sajab, M.S. & Mohd Said, N.S., (2026). Pineapple peel cellulose-based eco-friendly fertilizer nanocomposites for improved nutrient delivery. Scientific Reports. 16, 8971. Q1 JCR DOI · PDF
- Hanipa, M.A.F., Zaidi, S.A.S., Wan Ishak W.H & Sajab, M.S. (2026). Effect of Cellulose Nanofibrils in Direct Melt-Blending of Poly-(Lactic Acid) and Poly(Butylene Succinate) for 3D Printing. Bioresources, 21(1), 1050–1064. Q2 JCR DOI · PDF
- Samidin, S., Kurniawan, S. B., Japar, A. S., Isahak, W. N. R. W., Sajab, M. S., Takriff, M.S., Luthfi, A.A.I., Tao, D.G., Lay, C.H., Mahmod, S.S. and Khairuddin, N.F.M. (2026). Advances in mechanical cell disruption for algal biofuel: A decade of progress toward industrial integration.Biomass and Bioenergy,204, 108432. Q1 JCR DOI · PDF
- He, L., Luthfi, A.A.I., Saleh, N.M., Yaakob, Z., Salleh, M.Z.M., Ahmad, K.N., Sajab, M.S., Li, X. and Tan, J., 2025. Microalgae Biodiesel: Advances, Costs, and Potential. Waste and Biomass Valorization, 17 (4), 1919-1937. Q1 JCR DOI · PDF
2025 · 11 articles
- Kaco, H., Mazlan, M. H. N., Hisham, A. N., Faiz, A. K., Ismail, M. K. H., Sajab, M. S., & Idris, F. M. (2025). Effect of slow-release fertiliser using super-absorbent polymer hydrogels to stimulate germination of Brassica rapa subsp. Chinensis. Malaysian Journal of Analytical Sciences (MJAS). 29(6): 1628 Scopus PDF
- Tiang, M.F,. Tan, E.J., Goh, E., A.A.I., Wan Ishak, W.N.R., Sajab, M.S., Ding, G. & Abdul, P.M. (2025) Photoluminescent Carbon Dot: An Overview on Synthesis Approaches and Applications of Carbon Dot. Jurnal Kejuruteraan 37(2) 2025: 993-1003 ESCI DOI · PDF
- Ishak, W. H. W., Ahmad, I., Rosli, N. A., Dufresne, A., Ahmad, S., Sajab, M. S., & Zain, A. R. M. (2025). Fabrication of 3D-Printed PLA/Liquid Natural Rubber/Cellulose Nanocrystals Bionanocomposite for Advanced Biomedical Applications.Journal of Materials Research and Technology. 39, 5164-5177. Q1 JCR DOI · PDF
- Qian, Z., Li, X., Yan, G., Chen, X., Sajab, M. S., Ding, G., & Wan Jusoh, W. N. L. (2025). Sodium Alginate/Carboxymethyl Chitosan Hydrogel Microbeads for Antibiotic Adsorption in Single and Binary Systems.Gels,11(8), 646. Q1 JCR DOI · PDF
- Zhang, G., Ao, Q., Zhou, X., Ding, G., Wang, Z., Teow, Y. H., Sajab, M. S., Ma, Z., Li, Z., & Zhao, L. (2025). Research progress on materials and devices related to virus enrichment. Materials China, 44(7), 673–683. Scopus DOI · PDF
- Wan Ishak, W. H., Rosli, N. A., Ahmad, I., Dufresne, A., Ahmad, S., Shahdan, D., & Sajab, M. S. (2025). Enhanced Toughness and Degradability of PLA‐Based Filaments for Fused Deposition Modeling (FDM) 3D Printing Applications.Journal of Applied Polymer Science, e57391. Q2 JCR DOI · PDF
- Kaco, H., Anuar, K. I. B. K., Izharruzzahir, N. N., Norhisyam, I. A., Rahmat, M. A. R., Sajab, M. S., & Idris, F. M. (2025). Leveraging 3D Printing Technology to Facilitate Quranic Education for the Visually Impaired. Journal of Quran Sunnah Education & Special Needs, 9(1), 25-42. MyCite DOI · PDF
- Ao Qing, Zhang Ge, Ding Gongtao, Sajab, M. S. Research progress on biomass and biomass-related hemostatic materials.Acta Materiae Compositae Sinica, 2025, 42(3): 1246-1260. Scopus DOI · PDF
- Rozi, N. S. M., Hamdan, M. N., Naim, A. M. M., Sajab, M. S., & Kaco, H. (2025, February). Physicochemical properties of reforming the recycled biobased polylactic acid (PLA) filament into film-liked shape. InAIP Conference Proceedings(Vol. 3271, No. 1, p. 060016). AIP Publishing LLC. Scopus DOI · PDF
- Hanipa, M.A.F., Zaidi, S.A.S., Sajab, M.S., Abdul, P.M. and Jamil, K., 2024. Comparative study of blending techniques in polylactic acid/cellulose nanofibrils green composites for benchtop 3D printing filaments. Polymer Composites. 46(4), 3070-3083 Q1 JCR DOI · PDF
- Jusoh, W.N.L.W., Sajab, M.S., Yasin, N.H.M., Abdul, P.M. and Takriff, M.S., 2025. Interaction of Chlorella vulgaris: Cell Attachment on Nanocellulose-Based Hydrogel for Sustainable Microalgae Cultivation.BioResources,20(1), pp.201-218. Q2 JCR DOI · PDF
2024 · 12 articles
- Li, X., Tiang, M.F., Cui, X., Li, Y., Wang, Z., Zhao, L., Takriff, M.S., Sajab, M.S., Abdul, P.M. and Ding, G., 2024. Precisely controlled electrostatically sprayed sodium alginate/carboxymethyl chitosan hydrogel microbeads as super-adsorbent for adsorption of cationic dye. International Journal of Biological Macromolecules, p.137989. Q1 JCR DOI · PDF
- Izharruzzahir, N.N., Khairil Anuar, K.I.B., Mohd Idris, F., Mohamad Jan, N., Mohd, S.M., Sajab, M.S. and Kaco, H., 2024. Integrating sensory-based activity modules to enhance tactile sensitivity in Braille learners: a comparative study. ESTEEM Journal of Social Sciences and Humanities, 8(SI), pp.1-13. MyCite PDF
- Rahmat, N.F., Sajab, M.S., Afdzaluddin, A.M., Chia, C.H. and Ding, G., Enhancing the electrochemical properties of biopolymer composites using starch‐graphene nanoplatelets.Polymer Composites. 45(16), 14905-14915 Q1 JCR DOI · PDF
- Azli, A.U.F., Anhar, N.A.H.K., Kaco, H., Sajab, M.S., Idris, F.M., Jan, N.M. and Mohd, S.M., 2024. Crafting Mathematical Minds by Engaging Braille-Tangible 3in1 3D Printed Geoboards Module for Visually Impaired Children. Semarak International Journal of Fundamental and Applied Mathematics, 1(1), pp.1-12. MyCite DOI · PDF
- Abd Manaf, M., Harun, S., Md. Jahim, J., Sajab, M.S. and Ibrahim, Z., 2024. Synergistic sequential oxidative extraction for nanofibrillated cellulose isolated from oil palm empty fruit bunch.Plos one,19(6), p.e0299312. Q2 JCR DOI · PDF
- Latif, A.A., Shuhaida, H., Sajab, M.S. and Markom, M., 2024. Lab to Pilot Scale Assessment on the Pretreatment of Empty Fruit Bunch Using Anhydrous Ammonia.BioResources,19(3). Q2 JCR DOI · PDF
- Li, Z., Zhao, L., Ao, Q., Zhang, G., Kang, D., Li, Y., Liu, J., Ding, G., Ma, Z., Teow, Y.H. and Sajab, M.S., 2024. Exploring the cationic surfactant adsorption efficiency at concentrations relative to the critical micelle concentration by SA/SiO2 microspheres.Journal of Environmental Management,367, p.122069. Q1 JCR DOI · PDF
- Hanipa, M.A.F., Tiang, M.F., Luthfi, A.A.I., Sajab, M.S., Bakar, M.H.A., Reungsang, A., Lay, C.H., Wu, S.Y., Kamarudin, K.F. and Abdul, P.M., 2024. Illumination optimization strategies to enhance hydrogen productivity and light conversion efficiency for photo-fermentation by Rhodobacter sphaeroides KKU-PS1 using a concentrated multi-substrate feedstock. International Journal of Hydrogen Energy, 88, p Q1 JCR DOI · PDF
- Sajab, M.S., Mohan, D., Ling, T.T., Kaco, H., Ishak, W.H.W. and Ding, G., 2024. Nanocellulose-based composites for 3D printed stimuli-responsive swelling hydrogel.Industrial Crops and Products,222, p.119541. Q1 JCR DOI · PDF
- Hamdan, M. N., Mohd Naim, A. M., Mohd Rozi, N. S., Sajab, M. S., & Kaco, H. (2024, March). Intensify Biodegradation Process of Polylactic Acid (PLA) Waste Generated from 3D Printing Activities. In Materials Science Forum (Vol. 1114, pp. 137-144). Trans Tech Publications Ltd. Scopus DOI · PDF
- Liu, G., Tiang, M.F., Ma, S., Wei, Z., Liang, X., Sajab, M.S., Abdul, P.M., Zhou, X., Ma, Z. and Ding, G. (2024). An alternative peptone preparation using Hermetia illucens (Black soldier fly) hydrolysis: process optimization and performance evaluation. PeerJ, 12, e16995. Q2 JCR DOI · PDF
- Rahmat, N. F., Sajab, M. S., Afdzaluddin, A. M., Ding, G., & Chia, C. H. (2024). Thermoplastic Sugar Palm Starch Reinforced Graphene Nanoplatelets for Sustainable Biocomposite Films. BioResources, 19(1). Q2 JCR DOI · PDF
2023 · 8 articles
- Yap, J. X., Leo, C. P., Chan, D. J. C., Yasin, N. H. M., & Sajab, M. S. (2023). Chlorella vulgaris nanocellulose in hydrogel beads for dye removal. Separation and Purification Technology, 324, 124613. Q1 JCR DOI · PDF
- Anuar, K. I. B. K., Izharruzzahir, N. N., Sajab, M. S., & Kaco, H. (2023). Enhancing finger sensitivity: Sensory-based activity module. Malaysia Journal of Invention and Innovation (MJII), 2(4). MyCite DOI · PDF
- Zaidi, S. A. S., Kwan, C. E., Mohan, D., Harun, S., Luthfi, A. A. I., & Sajab, M. S. (2023). Evaluating the Stability of PLA-Lignin Filament Produced by Bench-Top Extruder for Sustainable 3D Printing. Materials, 16(5), 1793. Q1 JCR DOI · PDF
- Sajab, M. S., Wan Jusoh, W. N. L., Mohan, D., Kaco, H., & Baini, R. (2023). 3D Printed Functionalized Nanocellulose as an Adsorbent in Batch and Fixed-Bed Systems.Polymers,14(11), 2260 Q1 JCR DOI · PDF
- Wan Jusoh, W. N. L., Mohan, D., Sajab, M. S., Abdul, P. M., Kaco, H., Ding, G., & Baini, R. (2023). Nanocellulose-Based Biomaterial Ink Hydrogel for Uptake/Release of Bovine Serum Albumin.Polymers,15(4), 837 Q1 JCR DOI · PDF
- Luthfi, A.A.I., Abdul, P.M., Jahim, J.M., Engliman, N.S., Jamali, N.S., Tan, J.P., Manaf, S.F.A., Sajab, M.S. and Bukhari, N.A. (2023). Isolation and Characterization of Biohydrogen-Producing Bacteria for Biohydrogen Fermentation Using Oil Palm Biomass-Based Carbon Source. Applied Sciences, 13(1), 656. Q1 JCR DOI · PDF
- Hariz, H.B., Zaidi, S.A.S., Luthfi, A.A.I., Bukhari, N.A., Sajab, M.S., Markom, M., Harun, S., Tan, J.P., Ding, G.T. and Abdul, P.M. (2023). Succinic Acid Production from Oil Palm Biomass: A Prospective Plastic Pollution Solution. Fermentation, 9(1), 46. Q1 JCR DOI · PDF
- Feng, H., Wang, Z., Sajab, M. S., Abdul, P. M., & Ding, G. (2023). A novel chitinous nanoparticles prepared and characterized with black soldier fly (Hermetia illucens L.) using steam flash explosion treatment. International Journal of Biological Macromolecules, 123210. Q1 JCR DOI · PDF
2022 · 11 articles
- Tiang, M.F., Azhar, A.A., Hanipa, M.A.F., Abdul, P.M., Sajab, M.S., Nordin, D., Mahmod, S.S., Luthfi, A.A.I. and Jahim, J.M., 2022. Advanced Optimization Strategies to Enhance Photo-fermentative Biohydrogen Production by Non-Sulfur Purple Bacteria. Sains Malaysiana, 51(11), pp.3567-3578. Q4 JCR DOI · PDF
- Rahim, N. A., Zakaria, F., Luthfi, A. A. I., Bukhari, N. A., Abdul, P. M., Salleh, M. Z. M., & Sajab, M. S. (2022) Saccharification of Palm Kernel Cake using Thermostable Lignocellulolytic Enzymes. International Journal of Undergraduate Research 3 (2): 69-73. MyCite DOI · PDF
- Sajab, M. S., Mastar@Masdar, M. S., Yuhana, N. Y., Harun, S., Rosli, M. I., & Rohani, R. (2022) Key Elements for Development of Translational Education for Chemical Engineering Student. International Journal of Undergraduate Research 3 (2): 27-31. MyCite DOI · PDF
- Kaco, H., Norhisyam, I.A., Rahmat, M.A.R., Ruslan, N.H., Idris, F.M., Jan, F.M., Mohd, S.M., Sajab, M.S. (2022) 3D Printing Physic. ASEAN Journal of Engineering and Technology, 2 (2): 05-09, 11(3) MyCite DOI · PDF
- Kaco, H., Norhisyam, I.A., Rahmat, M.A.R., Ruslan, N.H., Idris, F.M., Jan, F.M., Mohd, S.M., Sajab, M.S. (2022) The Essence of Practicing 3D Printed Models through Game-based Module in Learning Braille Quran Code among the Beginners. International Journal of Academic Research in Progressive Education and Development, 11(3), 664-675. ERA DOI · PDF
- Azmi, M.H.I.M., Hashim, F.H., Huddin, A.B. and Sajab, M.S. (2022). Correlation Study between the Organic Compounds and Ripening Stages of Oil Palm Fruitlets Based on the Raman Spectra. Sensors, 22(18), p.7091. Q1 JCR DOI · PDF
- Tzuan, G.T.H., Hashim, F.H., Raj, T., Baseri Huddin, A. and Sajab, M.S., (2022). Oil Palm Fruits Ripeness Classification Based on the Characteristics of Protein, Lipid, Carotene, and Guanine/Cytosine from the Raman Spectra. Plants, 11(15), p.1936. Q1 JCR DOI · PDF
- Saad, M.J., Hua, C.C., Zakaria, S. and Sajab, M.S., (2022). Aplikasi Karbon Teraktif Sekam Padi Terhadap Efluen Kilang Kelapa Sawit Menggunakan Kaedah Penjerapan. Malaysian Journal of Analytical Sciences, 26(4), pp.902-913., 51, 1277-1281. Scopus DOI · PDF
- Wan Jusoh, W. N. L., Sajab, M. S., Mohamed Abdul, P., & Kaco, H. (2022). Recent Advances in 3D Bioprinting: A Review of Cellulose-Based Biomaterials Ink.Polymers,14(11), 2260 Q1 JCR DOI · PDF
- Arris, F. A., Mohan, D., & Sajab, M. S. (2022). Facile Synthesis of 3D Printed Tailored Electrode for 3-Monochloropropane-1, 2-Diol (3-MCPD) Sensing. Micromachines, 13(3), 383. Q2 JCR DOI · PDF
- Zairullisham, N. Z. M., Ab Hakim, U. H., Kaco, H., Saadon, A. S., & Sajab, M. S. (2022). Reprocessing of 3D printing filament’s fragment by hydrolysis and recycling into the formation of bioplastic. Materials Today: Proceedings, 51, 1277-1281. Scopus DOI · PDF
2021 · 10 articles
- Arisht, S.N., Roslan, R., Gie, G.A., Mahmod, S.S., Sajab, M.S., Lay, C.H., Wu, S.Y., Ding, G.T., Jamali, N.S., Jahim, J.M. and Abdul, P.M. (2021). Effect of nano zero-valent iron (nZVI) on biohydrogen production in anaerobic fermentation of oil palm frond juice using Clostridium butyricum JKT37. Biomass and Bioenergy, 154, 106270. Q1 JCR DOI · PDF
- Amran, U. A., Salleh, K. M., Zakaria, S., Roslan, R., Chia, C. H., Jaafar, S. N. S., Sajab, M. S., & Mostapha, M. (2021). Production of rigid polyurethane foams using polyol from liquefied oil palm biomass: variation of isocyanate indexes. Polymers, 13(18). Q1 JCR DOI · PDF
- Jasni, J., Yasin, N.H.M., Ruslan, N., Noor, C.N.A.C.M., Narayanan, S. Takriff, M.S., Sajab, M.S (2021). Strategies of Utilising Agriculture Wastewater for Microalgae Cultivation and Its Possible Applications: A Review. ASM Science Journal, 16, 1-12. Scopus DOI · PDF
- Harun, S., Tajudin, A. M., Latif, A. A., Mahmod, S. S., Sajab, M. S., Markom, M., & Jahim, J. M. (2021). Insight into the Deep Eutectic Solvent Pretreatment of Oil Palm Empty Fruit Bunches: Effects of Temperature, Empty Fruit Bunch to Solvent Ratio, and Time. BioResources, 16(3), 6313-6341. Q2 JCR DOI · PDF
- Mohan, D., Teong, Z.K., Sajab, M. S. & Kaco, H. (2021). Well-dispersed cellulose-graphene in 4D printing biopolymer. Materials Letters, 303, 130522 Q2 JCR DOI · PDF
- Mohan, D., Teong, Z. K., Sajab, M. S., Kamarudin, N. H. N., & Kaco, H. (2021). Intact Fibrillated 3D-Printed Cellulose Macrofibrils/CaCO3 for Controlled Drug Delivery. Polymers, 13(12), 1912. Q1 JCR DOI · PDF
- Yaakob, M. N. A., Roslan, R., Salim, N., Mustapha, S. N. H., Zakaria, S., Chia, C. H., & Sajab, M. S. (2021). Effect of Catalysts on the Yield and Properties of Lignin from Microwave-Assisted Acetosolv Extraction of Oil Palm Empty Fruit Bunch Fibres. Journal of Oil Palm Research, 33(1), 74-83. Q3 JCR DOI · PDF
- Arris, F.A., Manan, W.N., Kaco, H., Shaffie, A.H. & Sajab, M. S. (2021). Electrochemical Characterization of Graphite-Zero-Valent Iron for 3-Monochloropropane-1, 2-Diol (3-MCPD) Detection. Materials Science Forum, 1025, 20-25 Scopus DOI · PDF
- Mohan, D., Sajab, M. S., Bakarudin, S.B., Roslan, R. & Kaco, H. (2021). 3D Printed Polyurethane Reinforced Graphene Nanoplatelets. Materials Science Forum, 1025, 47-52. Scopus DOI · PDF
- Mohan, D., Teong, Z. K., Bakir, A. N., Sajab, M. S., & Kaco, H. (2021). Homogeneous distribution of lignin/graphene fillers with enhanced interlayer adhesion for 3D printing filament. Polymer Composites. 42 (5), 2408-2421. Q2 JCR PDF
2020 · 9 articles
- Arris, F. A., Thai, V. T. S., Manan, W. N., & Sajab, M. S. (2020). A Revisit to the Formation and Mitigation of 3-Chloropropane-1, 2-Diol in Palm Oil Production. Foods, 9(12), 1769. Q2 JCR DOI · PDF
- Saad, M. J., Sajab, M. S, Busu, W. N., Misran, S., Zakaria, S., Chin, S. X. & Chia, C. H. 2020. Comparative Adsorption Mechanism of Rice Straw Activated Carbon Activated with NaOH and KOH. Sains Malaysiana. 49(11), 2721-34 Q4 JCR DOI · PDF
- Azali, N. S., Kamarudin, N. H. N., Jaafar, J. A., Timmiati, S. N., & Sajab, M. S. (2020). Modification of mesoporous silica nanoparticles with pH responsive polymer poly (2-vinylpyrrolidone) for the release of 5-Florouracil. Materials Today: Proceedings. Scopus DOI · PDF
- Mohd Zin, F. A., Noor, A. A. M., Lee, S. W., Sajab, M. S., Razab, M. K. A. A., Abdullah, N. H., & Che Zaudin, N. A. (2020). Graphene Oxide Silver Cellulose Alginate for Antibacterial. In Materials Science Forum (Vol. 1010, pp. 590-595). Trans Tech Publications Ltd. Scopus PDF
- Mohan, D., Teong, Z. K., Bakir, A. N., Sajab, M. S., & Kaco, H. (2020). Extending Cellulose-Based Polymers Application in Additive Manufacturing Technology: A Review of Recent Approaches. Polymers, 12(9), 1876. Q1 JCR DOI · PDF
- Kaco, H., Yunus, A.A.M., Radzi, A.A.M.M., Bahtiar, M.H., Honan, M.H., Sajab, M.S. (2020). Oil water separation: Inauguration of cellulose and chemically modified cellulose rGO via graphene oxide functionalization. TEST Engineering & Management, 83, 1305-1313. Scopus PDF
- Mohan, D., Khairullah, N. F., How, Y. P., Sajab, M. S., & Kaco, H. (2020). 3D Printed Laminated CaCO3-Nanocellulose Films as Controlled-Release 5-Fluorouracil. Polymers, 12(4), 986. Q1 JCR DOI · PDF
- Razali, N. F., Chia, C. H., Zakaria, S., Sajab, M. S., Tobe, T., & Tsuda, M. (2020). Palm Oil Mill Effluent (POME) Decolorize through Continuous Fenton Oxidation Process using Limonite as Catalyst. Sains Malaysiana, 49(1), 69-74. Q4 JCR DOI · PDF
- Yaakob, M. N. A., Roslan, R., Salim, N., Mustapha, S. N. H., Zakaria, S., Chia, C. H., Sajab, M.S. & Yek, P. N. Y. (2020). Effect of Temperature on the Yield of Lignin Extracted Using Microwave-Assisted Acetosolv from Empty Fruit Bunch Fibers. In Materials Science Forum (Vol. 981, pp. 240-244). Trans Tech Publications Ltd. Scopus PDF
2019 · 9 articles
- Mohan, D., Sajab, M. S., Kaco, H., Bakarudin, S. B., & Noor, A. A. M. 2019. 3D Printing of UV-Curable Polyurethane Incorporated with Surface-Grafted Nanocellulose. Nanomaterials, 9(12), 1726. Q1 JCR DOI · PDF
- Ibrahim, F., Mohan, D., Sajab, M. S., Bakarudin, S. B., & Kaco, H. 2019. Evaluation of the compatibility of organosolv lignin-graphene nanoplatelets with photo-curable polyurethane in stereolithography 3d printing. Polymers, 11(10), 1544. Q1 JCR DOI · PDF
- Sajab, M. S., Santanaraj, J., Mohammad, A. W., Kaco, H., & Harun, S. (2019). Detoxification of Lignocellulosic Hydrolysates by in situ Formation of Fe (0) Nanoparticles on Activated Carbon. BioResources, 14(4), 8614-8626. Q2 JCR DOI · PDF
- Sajab, M. S., Mohan, D., Santanaraj, J., Chia, C. H., Kaco, H., Harun, S., & Kamarudin, N. H. N. 2019. Telescopic synthesis of cellulose nanofibrils with a stable dispersion of Fe (0) nanoparticles for synergistic removal of 5-fluorouracil. Scientific Reports, 9(1), 11703. Q1 JCR DOI · PDF
- Law, J.Y., Mohammad, A.W., Tee, Z.K., Zaman, N.K., Jahim, J.M. Santanaraj, J., Sajab, M.S. 2019. Recovery of succinic acid from fermentation broth by forward osmosis-assisted crystallization process. Journal of Membrane Science 583: 139-151. Q1 JCR DOI · PDF
- Saad, M. J., Chia, C. H., Zakaria, S., Sajab, M. S, Misran, S., Rahman, M. H. A., & Chin, S. X. 2019. Physical and chemical properties of the rice straw activated carbon produced from carbonization and KOH activation processes. Sains Malaysiana, 48(2), 385-391. Q3 JCR DOI · PDF
- Salleh, K.M., Zakaria, S., Sajab, M.S., Gan, S., Kaco, H. 2019. Chemically crosslinked hydrogel and its driving force towards superabsorbent behaviour. International Journal of Biological Macromolecules 131: 50-59. Q1 JCR DOI · PDF
- Sajab, M.S., Ismail, N.N.N., Santanaraj, J., Mohammad, A.W., Hassan, H.A., Chia, C.H., Zakaria, S., Noor, A.M. 2019. Insight observation into rapid discoloration of batik textile effluent by in situ formations of zero valent iron. Sains Malaysiana 8 (2), 393-399. Q3 JCR DOI · PDF
- Tajuddin, A.M., Harun, S., Sajab, S.M., Zubairi, S.I., Jahim, J.M., Markom, M., Nor, M.T.M., Abdullah, M.A., Hashim, N. 2019. Influence of deep eutectic solvent (DES) pretreatment on various chemical composition of empty fruit bunch (EFB). International Journal of Engineering & Technology 8 (1.2): 266-274. Scopus PDF
2018 · 6 articles
- Haan, T.Y., Mohammad, A.W., Ramli, S., Sajab, M.S., Mazuki, N.I.M. 2018. Potential of Membrane Technology for Treatment and Reuse of Water from Old Mining Lakes. Sains Malaysiana 47 (11): 2887-2897. Q3 JCR DOI · PDF
- Manan, W.N.Q.A.W, Santanaraj, J., Sajab, S.M., Isahak, W.N.R.W., Chia, C.H. 2018. Discoloration of batik effluent by chemically modified oil palm empty fruit bunch fibers. Jurnal Kejuruteraan SI 1(4): 87-92. ESCI DOI · PDF
- Sajab, M.S., Jauhari, W.N.W.A.R., Chia, C.H., Zakaria, S., Kaco, H., Noor, A.M. 2018. Oleophilicity and oil-water separation by reduced graphene oxide grafted oil palm empty fruit bunch fibers. Sains Malaysiana 47 (8): 1891-1896. Q3 JCR DOI · PDF
- Rahman, N.F.A., Harun, S., Sajab, M.S., Zubairi, S.I., Jahim, J.M., Markom, M., Nor, M.T.M., Abdullah, M.A., Hashim, N. 2018. Boosting enzymatic hydrolysis of pressurized ammonium hydroxide pretreated empty fruit bunch using response surface methodology. Journal of Engineering Science and Technology 13 (8): 2421-2445. Scopus PDF
- Latif, A.A., Harun, S., Sajab, M.S., Markom, M., Jahim, J.M. 2018. Ammonia-based pretreatment for lignocellulosic biomass conversion – an overview. Journal of Engineering Science and Technology 13 (6): 1595-1620. Scopus PDF
- Salleh, K.M., Zakaria, S., Sajab, M.S., Gan, S., Chia, C.H., Jaafar, S.N.S., Amran, U.A. 2018. Chemically crosslinked hydrogel and its driving force towards superabsorbent behaviour. International Journal of Biological Macromolecules 118: 1422-1430. Q1 JCR DOI · PDF
2017 · 4 articles
- Azahari, N.M., Zakaria, S., Kaco, H., Yee, G.S., Chia, C.H., Jaafar, S.H.N., Sajab, M.S. 2017. Regenerated kenaf cellulose membrane from NaOH/urea aqueous solution by coagulating with sulphuric acid. Sains Malaysiana 46 (1): 795-801. Q3 JCR DOI · PDF
- Kaco, H., Baharin, K.W., Zakaria, S., Chia, C.H., Sajab, M.S., Jaafar, S.N.S., Gan, G.Y. 2017. Preparation and characterization of Fe3O4/regenerated cellulose membrane. Sains Malaysiana 46 (4): 623-628. Q3 JCR DOI · PDF
- Santanaraj, J., Sajab, M.S., Mohammad, A.W., Harun, S., Chia, C.H., Zakaria, S., Kaco, H. 2017. Enhanced delignification of oil palm empty fruit bunch fibers with in situ Fenton-oxidation. Bioresources 12 (3): 5223-5235. Q1 JCR DOI · PDF
- Sajab, M.S., Chia, C.H., Zakaria, S., Sillanpää, M. 2017. Adsorption of heavy metal ions on surface of functionalized oil palm empty fruit bunch fibers: single and binary systems. Sains Malaysiana 46 (1): 157-165. Q1 JCR DOI · PDF
2016 · 4 articles
- Noor A. M, Rameshkumar, P., Yusoff, N., Ming H. N., Sajab, M. S. 2016. Microwave synthesis of reduced graphene oxide decorated with silver nanoparticles for electrochemical determination of 4-nitrophenol. Ceramics International, 42(16), 18813-18820. Q1 JCR DOI · PDF
- Takrif, M.S., Zakaria, M.Z., Sajab, M.S., Teow, Y.H. 2016. Pre-treatments anaerobic Palm Oil Mill Effluent (POME) for microalgae treatment. Indian Journal of Science and Technology 9 (21). Scopus DOI · PDF
- Sajab, M.S., Chia, C.H., Chan, C.H., Zakaria, S., Kaco, H., Chook, S.W., Chin, S.X. 2016. Bifunctional graphene oxide–cellulose nanofibril aerogel loaded with Fe(III) for the removal of cationic dye via simultaneous adsorption and Fenton oxidation. RSC Advances 6: 9819-19825. Q1 JCR DOI · PDF
- Chin, S.X., Tasirin, S.M., Chan, C.H., Chia, C.H., Chook, S.W., Zakaria, S., Sajab, M.S., 2016. Catalytic conversion of empty fruit bunch (EFB) fibres into lactic acid by lead (II) ions. Bioresources 11 (1): 2186-2201. Q1 JCR DOI · PDF
2010 – 2015 · 13 articles
- Chook, S.W., Chia, C.H., Chan, C.H., Chin, S.X., Zakaria, S., Sajab, M.S., Huang, N.M. 2015. A porous aerogel nanocomposite of silver nanoparticles-functionalized cellulose nanofibrils for SERS detection and catalytic degradation of rhodamine B. RSC Advances 5: 88915-88920. Q1 JCR DOI · PDF
- Kaco, H., Zakaria, S., Chia, C.H., Sajab, M.S., Saidi, A.S.M. 2015. Characterization of Aldehyde Crosslinked Kenaf Regenerated Cellulose Film. Bioresources 10 (4): 6705-6719. Q1 JCR DOI · PDF
- Sajab, M. S., Chia, C. H., Zakaria, S., Sillanpää, M. 2014. Fixed-bed column studies for the removal of cationic and anionic dyes by chemically modified oil palm empty fruit bunch fibers: single-and multi-solute systems. Desalination and Water Treatment 55 (5): 1372-1379. Q3 JCR DOI · PDF
- Chong, K.Y., Chia, C.H., Zakaria, S., Sajab, M.S., Chook, S.W., Khiew, P.S. 2015. CaCO3-decorated cellulose aerogel for removal of Congo Red from aqueous solution. Cellulose 22 (4): 2683-2691. Q1 JCR DOI · PDF
- Chan, C.H., Chia, C.H., Zakaria, S., Sajab, M.S., Chin, S.X. 2015. Cellulose nanofibrils: a rapid adsorbent for the removal of methylene blue. RSC Advances 5 (24): 18204-18212. Q1 JCR DOI · PDF
- Chong, K.Y., Chia, C. H., Zakaria, S., Sajab, M. S. 2014. Vaterite calcium carbonate for the adsorption of Congo red from aqueous solutions. Journal of Environmental Chemical Engineering. 2(4): 2156-2161. Scopus DOI · PDF
- Sajab, M. S., Chia, C. H., Zakaria, S., Sillanpää, M. 2014. Removal of organic pollutants and decolorization of bleaching effluents from pulp and paper mill by adsorption using chemically treated oil palm empty fruit bunch fibers. Bioresources. 9(3): 4517-4527. Q1 JCR DOI · PDF
- Noor A. M, Radiman S., Ming H. N., Ngee L. H., Yarmo M. A., Rahim S., Ahmad S.I., Shamsudin S. A., Sajab, M. S. 2013. Synthesis and morphology control of TiO2 nanostructures via hydrothermal method for applications as electrodes in dye-sensitized solar cell. Sains Malaysiana 42(7): 967-974. Q3 JCR PDF
- Pua, F. L., Sajab, M. S., Chia C.H, Zakaria S., Rahman I.A, Salit, M. S. 2013. Alkaline-treated cocoa pod husk as adsorbent for removing methylene blue from aqueous solutions. Journal of Environmental Chemical Engineering 1(3): 460-465. Scopus DOI · PDF
- Chia, C. H., Razali, N. F., Sajab, M. S., Zakaria, Huang, N. M., Lim, H. N. 2013. Methylene blue adsorption on graphene oxide. Sains Malaysiana 42(6): 819-826. Scopus PDF
- Sajab, M. S., Chia, C. H., Zakaria, S., K. L., Khiew, P. S., 2013. Cationic and anionic modifications of oil palm empty fruit bunch fibers for the removal of dyes from aqueous solutions. Bioresource Technology 128: 571-577. Q1 JCR DOI · PDF
- Sajab, M. S., Chia, C. H., Zakaria, S., Jani, S. M., Ayob, M. K., Chee, K. L., Khiew, P. S., Chiu, W. S. 2011. Citric acid modified kenaf core fibres for removal of methylene blue from aqueous solution. Bioresource Technology 102(15): 7237-7243. Q1 JCR DOI · PDF
- Sajab, M. S., Chia, C. H., Zakaria, S., Jani, S. M., Khiew, P. S., Chiu, W. S. 2010. Removal of Copper(II) Ions from Aqueous Solution Using Alkali-treated Kenaf Core Fibres. Adsorption Science and Technology 28:377-385. Q3 JCR DOI · PDF
Books, proceedings & media
Books & book chapters (11)
- Jusoh, W.N.L.W., Sajab, M.S. 2026. Biopencetakan Mikroalga dalam Hidrogel Selulosa, Penerbit UKM (ISBN 978-629-486-670-6)
- Kaco, H., Sajab, M.S. 2025. Integrating 3D Printing Technology in STEM Education. Roobah (ISBN 978-629-940800-0)
- Rahmat, N.F., Sajab, M.S. and Atiqah, A., 2024. Conducting Biopolymer Composite Films. In Emerging Sustainable and Renewable Composites (pp. 293-320). CRC Press (ISBN 978-1-003-40821-5)
- M. N. An’amt, F. A. Mohd Zin, Sajab, M.S., M. K. A. Abdul Razab and N. H. Abd. 2023. Graphene-based Nanocomposites for Cholesterol Detection: Graphene-based Nanocomposite Sensors Detection to Diagnosis. Royal Society of Chemistry (ISBN 978-1-83767-067-3)
- Kaco, H., Sajab, M.S., Idris, F.M. 2021. Fun learning activity with 3D printing kit as attractive approaches for emphasizing physics interest: Active learning in education 4.0: students as owners of learning. Penerbit Universiti Sains Islam Malaysia (USIM) (ISBN 978-967-440-934-0)
- Kaco, H., Zakaria, S., Chia. C.H., Sajab, M.S, Idris, F.M. 2019. Degradation of Cellulose: effect of acid Hydrolysis Time on Cellulose Hydrogel Properties. Innovation for Sustainability and Green Technology: Degradation of Inanimates Forms. Penerbit Universiti Sains Islam Malaysia (USIM) (ISBN 978-967-440-700-1)
- Kaco, H., Sajab, M.S, Zakaria, S., Chia. C.H. 2018. Pengenalan. Potensi Produk Hijau Termaju daripada Sumber Biojisim Pertanian. Penerbit UKM (ISBN 978-967-412-538-7)
- Kaco, H., Sajab, M.S., Zakaria, S., Chia. C.H., Chin, S.X., Hashim, S.N.A.S. 2018. Lignoselulosa. Potensi Produk Hijau Termaju daripada Sumber Biojisim Pertanian. Penerbit UKM (ISBN 978-967-412-538-7)
- Kaco, H., Sajab, M.S., Zakaria, S., Chia. C.H. Chin, S.X. 2018. Sumber lignoselulosa daripada hasil industri pertanian. Potensi Produk Hijau Termaju daripada Sumber Biojisim Pertanian. Penerbit UKM (ISBN 978-967-412-538-7)
- Kaco, H., Sajab, M.S., Zakaria, S., Chia. C.H., Asa’ari, A.Z.M., Othman, R. 2018. Potensi baharu produk konvensional daripada biojisim lignoselulosa. Potensi Produk Hijau Termaju daripada Sumber Biojisim Pertanian. Penerbit UKM (ISBN 978-967-412-538-7)
- Kaco, H., Sajab, S.M., Zakaria, S., Chia. C.H. 2018. Potensi Produk Hijau Termaju daripada Sumber Biojisim Pertanian. Penerbit UKM (ISBN 978-967-412-538-7)
Conference proceedings (26)
- Sajab, M. S. Sustainable Biopolymer Nanocomposites for Additive Manufacturing, 6th Symposium on Industrial Science and Technology (SISTEC 2026) (9-10 Sept 2026)
- Sajab, M. S. Sustainable Biocomposites Sensor via Additive Manufacturing, 51st IUPAC World Polymer Congress (MACRO 2026) (28-31 July 2026)
- Sajab, M. S. Advancing Sustainable 3D Printing with Lignocellulose Derived Biopolymer Composites, 67th Advanced Materials Congress (13-15 Oct 2025)
- Sajab, M. S. Empathy-Driven Engineering Enhancing Student Engagement and Innovation Through the 3DP STEAMulation Program, 2025 International Conference on Engineering and Built Environment Education (PeKA 2025) (19-20 July 2025)
- Sajab, M. S. Exploring lignocellulose-based biopolymers for functionalized additive manufacturing, 1st International Conference and Innovation on Education, Science & Technology (21-22 June 2025)
- Sajab, M. S. Sustainable cultivation of microalgae in 3D printed nanocellulose-based hydrogel, International Symposium on Biomedicine and Biomaterials (1-3 Sep 2024)
- Sajab, M. S. Advancements in Cellulose-Based Material Ink Formulation for Enhanced 3D Printing Application, International Conference On Advanced Materials And Applied Sciences 2024 (ICONMAS) (26-27 June 2024)
- Sajab, M. S. Effect of Glycerol Plasticizers on Physical And Mechanical Properties of Sugar Palm Starch-Based Films, International Conference on Chemical Engineering & Sustainability 2023 (15-16 Aug 2023)
- Sajab, M. S. The Potential of Lignocellulose-Based Biopolymer in Additive Manufacturing, Regional Conference on Solid State Science and Technology (RCSSST) (6-8 Sep 2022)
- Sajab, M. S. Cellulose-Based Biomaterials Ink for 3D Bioprinting, International Symposium on Biomedicine and Biomaterials (29-30 Aug 2022)
- Sajab, M. S. Key Elements for Development Translational Education for Chemical Engineering Student, kNOVASI 2021 (17-18 Aug 2021)
- Sajab, M. S. Facile synthesis of 3D printed tailor-shape electrode PLA-GNP for electrochemical sensing, Micromachines 2021 — 1st International Conference on Micromachines and Applications (ICMA2021) (15-30 Apr 2021)
- Sajab, M. S. Extending the Use of Lignocellulosic Biomass in Additive Manufacturing Technology, Nanomaterials: Applications & Properties (NAP-2020), Sumy, Ukraine (9-13 Nov. 2020)
- Sajab, M. S. Assembly and Disassembly Models in Chemical Engineering Process using 3D Printing Technology, K-NOVASI Pengajaran & Pembelajaran UKM 2019 (15-16 Feb 2019)
- Sajab, M. S. Telescopic synthesis of stable zero valent iron through the in situ formation of Fe(0)-cellulose nanofibrils. International Congress on Advanced Materials Sciences and Engineering 2019 (20-27 Aug 2019)
- Noor, A. M., Zin, F. M., Wei, L. S., Huang, N. M., Bakar, M. A., Sajab, M. S., & Zulhisyam, A. K. (2019, February). Laser scribe silver-reduced graphene oxide as novel bactericidal filter. In AIP Conference Proceedings (Vol. 2068, No. 1, p. 020026). AIP Publishing (Feb 2019)
- Sajab, M. S. 3rd International Conference on New Energy and Future Energy Systems (NEFES 2018), (21-24 Aug 2017)
- Sajab, M. S., Kaco, H. Regenerated Cellulose as Biobased Product. International Conference of Applied Biology, Chemistry & Science (ICABCS 2018) (27-28 Oct 2018)
- Sajab, M. S. Isahak, W.N.R.W., Rahim, R.A. Kepentingan Pendedahan Awal Etika dan Profesional dalam Kalangan Pelajar Tahun 1 JKKP, K-NOVASI Pengajaran & Pembelajaran UKM 2017 (15-16 Feb 2017)
- Sajab, M. S., Santanaraj, J., Mohammad, A.W. Removal of Potential Inhibitors in Bioconversion of Lignocellulose using Fenton Oxidation and Adsorption Techniques. Wood and Biofiber International Conference 2017 (21-23 Nov 2017)
- Sajab, M. S., Chia, C. H., Zakaria, S., Kaco, H., Chook, S.W., Razali, N.F. Graphene Oxide Encapsulated on Regenerated Cellulose Beads. The 2nd International Science, Technology and Engineering Conference 2016 (20-23 Apr 2016)
- Sajab, M. S., Jauhari, W.N.W.A.R., Kaco, H., Chia, C. H., Zakaria, S. Oleophilicity and Hydrophobicity Characteristics of Modified Empty Fruit Bunch Fibers for Oil-Water Separation. Malaysia-Thailand-Japan International Conference on Science and Technology 2016 (28-29 Sept 2016)
- Sajab, M. S., Chia, C. H., Zakaria, S. Graphene Oxide Loaded Regenerated Cellulose as Dye Adsorbent. International Symposium on Advanced Polymeric Materials 2014, 9th (13-16 May 2014)
- Sajab, M. S., Chia, C. H., Zakaria, S. Kinetics of methylene blue adsorption on oil palm empty fruit bunch fibers. FST Postgraduate Colloquium, 13th (24-26 June 2013)
- Sajab, M. S., Chia, C. H., Zakaria, S. The potentials of oil palm empty fruit bunch fibers as adsorbent for wastewater treatment. The International Conference on Water and Wastewater Management (8-10 October 2013)
- Sajab, M. S., Chia, C. H., Zakaria, S. Removal of Copper(II) Ions from Aqueous Solution Using Alkali-treated Kenaf Core Fibres. Kolokium Siswazah ke-10 Fakulti Sains dan Teknologi, (23-24 Jun 2010)
Popular writing, radio & media (8)
- Sajab, M. S. & Hanipa, M.A.F. Biopolimer Boleh Resap: Masa Depan Implan Tulang Pencetakan 3D Mesra Tubuh, Majalah Arus Mampan (Edisi kedua 24/25)
- Sajab, M. S. & Wan Jusoh, W.N. L. Hidrogel Buka Jalan Baharu dalam Pengkulturan Mikroalga, Majalah Sains (3 July 2024)
- Sajab, M. S. & Hanipa, M.A.F. Bernama – Jendela Fikir: KPS Ekovative Challenge (12 Dec 2023)
- Sajab, M. S. Eksploitasi Biosumber sebagai Bahan Mampan Pembuatan Bahan Tambahan, Majalah IMPAK (Siri 4 2023)
- Sajab, M. S. IKIM.FM – Melestarikan Alam: Cabaran Teknologi Hijau bagi Penukaran Produk Mampan serta Bernilai Tinggi dalam Industri Kelapa Sawit (21 Jun 2022)
- Sajab, M. S. & Mohan, D. Penerokaan Polimer Berasaskan Bio Sebagai Bahan Dalam Teknologi Pembuatan Bahan Tambahan, Majalah Sains (20 Aug 2021)
- Sajab, M. S. Polimer Boleh Biorosot Peluang Menutup Ruang Pencemaran Plastik, Majalah Sains (11 Sep 2021)
- Mohan, D. & Sajab, M. S. Cellulose-Based Polymers in Additive Manufacturing, Encyclopedia (9 March 2020)
Teaching & service
Teaching, mentoring & academic service
Average student evaluation of 4.71 / 5 across 60 course offerings since 2015/16.
Undergraduate
- Materials Science & Engineering
- Elementary Skills of Chemical Engineering
- Project Management / Engineering Management
- Process Sustainability
- Research Project I & II
Postgraduate
- Research Methodology & Innovation
- Project Management
- Symbiotic Eco-Community
- Nanomaterial & Nanotechnology
Micro-credentials
- Introduction to Process Sustainability
- Best Practices in Process Sustainability
Thesis examination
- External examiner: 3 Ph.D., 5 M.Sc.
- Internal examiner: 4 Ph.D., 6 M.Sc.
- Viva chair: 3 Ph.D., 5 M.Sc.
- Peer reviewer: 72+ manuscripts for journals such as Carbohydrate Polymers, Int. J. Biological Macromolecules and Additive Manufacturing
Editorial & professional roles
- Guest Editor, Discover Industrial Chemistry and Materials (2026 – 2027)
- Editorial Board, Journal of Research Update in Polymer Science (Scopus) (2024 – 2026)
- Academic Advisor, Majalah Arus Mampan (2024 – present)
- Chief Guest Editor, Jurnal Kejuruteraan (2018)
- Technical Expert, Department of Standards Malaysia (2022 – 2026)
- Thrust Area Leader, Green Conversion Technology, UKM-YSD Chair for Sustainable Development (2021 – 2025)
- Professional Technologist (Ts.), Malaysia Board of Technologists
Invited talks, keynotes & presentations (35)
- Sustainable Biopolymer Nanocomposites for Additive Manufacturing: 6th Symposium on Industrial Science and Technology (SISTEC 2026) (Invited speaker, Sept 2026)
- Sustainable Biocomposites For Additive Manufacturing: IUPAC 51st World Polymer Congress (MACRO 2026) (Invited speaker, July 2026)
- Sesi Pengkongsian Dana Pembangunan Teknologi (TED): Universiti Malaysia Perlis (Invited speaker, Mac 2026)
- Sesi Pengkongsian Dana Pembangunan Teknologi (TED): Universiti Kebangsaan Malaysia (Invited speaker, Mac 2026)
- Functional Application of Sustainable Bio-Polybutylene Succinate in Additive Manufacturing: Festival of Ideas (FOI) 2025 (Exhibitor, Nov 2025)
- Biopolymers for functionalized additive manufacturing: International Training for Novel Functional & Composite Materials 2025 (Expert speaker, Oct 2025)
- STEM Workshop: Sekolah Menengah Integrasi Tahfiz Ilmuwan (SMITIN) (Invited Speaker, Oct 2025)
- Advancing sustainable 3D printing with lignocellulose-derived biopolymer composites: Baltic Conference Series (BCS) (Invited speaker, Oct 2025)
- Functionalized PBS in additive manufacturing: National Innovation and Commercialisation Expo (NICE 2025) (Exhibitor, Sep 2025)
- Exploring lignocellulose-based biopolymers for functionalized additive manufacturing: International Conference and Innovation on Education and Science & Technology (ICIEST 2025) (Keynote speaker, June 2025)
- Empathy-driven engineering: Enhancing student engagement and innovation through the 3DP STEAMulation program: International Conference on Engineering and Built Environment Education (PeKA 2025) (Oral presentation, May 2025)
- Exploring lignocellulose-based biopolymers for functionalized additive manufacturing: 1st Universiti Kebangsaan Malaysia-Kunming University Technical Talk (Keynote speaker, May 2025)
- Bicara Tokoh: Tip & trik untuk mendapatkan dana inovasi: Research & Innovation Week 2025 (Keynote speaker, May 2025)
- Sesi perkongsian dana MOSTI: MOSTI Fund Sharing Session (Invited speaker, March 2025)
- Plastic Pollution in Malaysia: Wanderlab Explorer (WLE) (Invited Speaker, Feb 2025)
- STEAMulation Program: Program STEM untuk Semua (Professor@School) (Speaker, Dec 2024)
- STEM Workshop: Kolej PERMATA Insan (Invited Speaker, Nov 2024)
- Sustainable cultivation of microalgae in 3D printed nanocellulose-based hydrogel: International Symposium on Biomedicine and Biomaterials (ISBB) 2024 (Invited speaker, Sep 2024)
- Research methodology 101: SD Guthrie Research Methodology Workshop (Expert speaker, Aug 2024)
- Plastic recycling and 3D printing technology: Urban Farming and Sustainable Living Program (Expert speaker, Aug 2024)
- Advancements in cellulose-based material ink formulation for enhanced 3D printing application: International Conference on Advanced Materials and Applied Sciences (IConMAS 2024) (Oral presentation, Jun 2024)
- 10th Malaysian International Seminar on Antarctica (MISA10): Yayasan Penyelidikan Antartika Sultan Mizan (YPASM) (Exhibitor, Aug 2024)
- Carbon reduction in eco-village: Building global common good with green synergy: 2024 Green Synergy Solution Workshop (Invited delegates, May 2024)
- Applied Research & Innovations in STEM Education (ARISE): Center for STEM Education Research, Faculty of Education (Invited speaker, Dec 2023)
- Sustainability Living Workshop: Pengurusan Aset Air Berhad (PAAB) (Invited speaker, Dec 2023)
- Green 3D bioprinting of microalgae in cellulose-based biomaterials ink: International Symposium on Chemical Engineering and Materials Science 2023 (Invited speaker, Sep 2023)
- Effect of glycerol on physical and mechanical properties of sugar palm starch biodegradable films: International Conference on Chemical Engineering & Sustainability 2023 (ICCHES 2023) (Oral presentation, Aug 2023)
- Climate Action Festival: Universiti Kebangsaan Malaysia (Speaker, Jan 2023)
- The potential of lignocellulose-based biopolymer in additive: 31st Regional Conference on Solid State Science and Technology (RCSSST2022) (Oral presentation, Sep 2022)
- Cellulose-based biomaterials ink for 3D bioprinting: International Symposium on Biomedicineand Biomaterials (ISBB) 2022 (Invited speaker, May 2022)
- Facile synthesis of 3D printed tailor-shape electrode PLA-GnP for electrochemical sensing: 1st International Conference on Micromachines and Applications (ICMA2021) (Oral presentation, Apr 2021)
- Kelestarian plastik melalui pencetakan 3D: Hari Profesion Teknikal Negara 2020 (Expert speaker, Dec 2020)
- Extending the use of lignocellulosic biomass in additive manufacturing technology: Nanomaterials: Applications & Properties (NAP-2020) (Invited speaker, July 2019)
- Integration of Fenton Technology in Biohydrogen Production from Oil Palm Biomass: International Conference on New Energy and Future Energy Systems (NEFES 2018) (Invited speaker, Aug 2018)
- Bicara Alumni FST: Simposium Sains dan Teknologi 2018 (Invited speaker, May 2018)
Conference & event organising committees (22)
- Round Table Discussion – CCUS: Current Scenario, Challenges & Expectations (Co-chair, 2026)
- International Conference on Future Science and Engineering (INCFUSE 2026) (Technical committee, 2026)
- Design for Plastics Circularity Challenge 2025 (University partner, 2025)
- Malaysia–Germany: Bridging Research & Expert Exchange in Conjunction with Research, Innovation & Commercialization Highlights (RICH) (Vice-chair, 2025)
- Sustainability Challenge 2025 (Technical committee, 2025)
- Microalgae Workshop II (Technical committee, 2025)
- Mechanization, Automation & Digitalization for Palm Oil Sustainability (MAD4PalmOil): Local Talent Empowering Palm Oil Industry Modernization (Technical committee, 2024)
- Design for Plastics Circularity Challenge 2024 (Co-chair, 2024)
- Program Jalinan Kasih Komuniti Penyayang (Advisor, 2024)
- 6th Asian Biohydrogen and Biorefinery Symposium (ABBS2021) (Head of technical committee, 2021)
- UKM Engineering Webinar Series 2021 (Technical committee, 2021)
- Sustainability Challenge 2019 (Technical committee, 2019)
- Palm Oil Sustainability Seminar 2017 (Sub-committee, 2017)
- Sustainability Challenge 2017 (Technical committee, 2017)
- Workshop on Crystallization & Crystal Characterization (Technical committee, 2017)
- POME To Energy Workshop (Technical committee, 2016)
- International Symposium on Advanced Polymeric Materials (ISAPM) (Secretary II, 2016)
- Conference on Nanotechnology and Bioresource Technology (NBT) (Sub-committee I, 2016)
- International Symposium on Advanced Polymeric Materials (ISAPM) (Sub-committee, 2014)
- National Physics Conference (NPC) (Sub-committee I, 2012)
- International Symposium on Advanced Polymeric Materials (ISAPM) (Sub-committee, 2012)
- National Physics Conference (NPC) (Sub-committee I, 2011)
Background
Education & career
Career
2022 – present
Associate Professor
Dept. of Chemical & Process Engineering, UKM
2024 – present
Director
Roobah Sdn. Bhd. (PEMULA@UKM)
2019 – 2022
Senior Lecturer
Dept. of Chemical & Process Engineering, UKM
2015 – 2019
Senior Lecturer
Research Center for Sustainable Process Technology (CESPRO), UKM
2015
Postdoctoral Researcher
Universiti Kebangsaan Malaysia
Education
2014
Ph.D. (Materials Science)
Universiti Kebangsaan Malaysia
2011
M.Sc. (Materials Science)
Universiti Kebangsaan Malaysia
2009
B.Sc. (Materials Science)
Universiti Kebangsaan Malaysia
International research visits
2025 – 2026
Northwest Minzu University, China
Visiting Researcher
2025
Sichuan Polytechnic University, China
Visiting Researcher
2019
Thailand Institute of Scientific and Technological Research (TISTR)
Visiting Researcher
2013
Lappeenranta University of Technology, Finland
Visiting Researcher
Work with us
Let’s build sustainable materials together
Prospective Ph.D. and Master’s students, industry partners and visiting researchers are welcome to get in touch about research collaboration, contract research and student opportunities.
Office
Department of Chemical & Process Engineering
Faculty of Engineering & Built Environment
Universiti Kebangsaan Malaysia
43600 UKM Bangi, Selangor, Malaysia
Phone +603 8921 6425
Email mohdshaiful@ukm.edu.my
Profile last updated: November 2026 · Back to top ↑