Sains Malaysiana 45(12)(2016): 1939–1945

http://dx.doi.org/10.17576/jsm-2016-4512-19

 

Ciri Fizikokimia Filem Boleh Makan dan Filem Polietilena Bagi Ubi Keledek (Ipomoea batatas) Goreng

(Physicochemical Properties of Edible Films and Polyetylene Film on Fried Sweet Potatoes (Ipomoea batatas))

 

RIZAFIZAH OTHAMAN*, KAUSAR AHMAD FUAD, FARHAN MOHD NOR

& ROZIDA MOHD KHALID

 

Pusat Pengajian Sains Kimia dan Teknologi Makanan, Fakulti Sains & Teknologi

Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Darul Ehsan, Malaysia

 

Received: 13 June 2016/Accepted: 17 October 2016

 

 

ABSTRAK

Penyelidikan dijalankan bagi menilai kesan penggunaan filem boleh makan dan filem polietilena (PE) sebagai bahan penyalut untuk ubi keledek (Ipomoea batatas) goreng. Kepingan ubi keledek disalut dengan lapisan filem boleh makan yang terdiri daripada 0.045 g/mL selulosa metil (MC), 0.045 g/mL selulosa hidroksipropil metil (HPMC) dan 0.16 g/mL jagung zein (CZ) sebelum digoreng di dalam minyak sawit pada suhu 170-180°C selama 3 min. Manakala ubi keledek juga disalut dengan filem tak boleh makan iaitu polietilena (PE) (nisbah PE kepada minyak 1:100 g/g) sebagai perbandingan. Ubi goreng tanpa salutan filem digunakan sebagai sampel kawalan. Ciri fizikokimia ubi goreng bersalut dianalisa. Keputusan menunjukkan semua filem melekat pada permukaan ubi setelah digoreng. Penggunaan filem CZ menjadikan permukaan filem licin dan wujud tanpa sebarang retakan. Filem MC pula memberi lapisan permukaan yang tidak rata tetapi menyaluti permukaan sampel dengan sekata. Tambahan pula, ubi bersalut MC menunjukkan peratusan lemak paling sedikit (13.6%) selain kandungan kelembapan yang paling tinggi (17.5%) berbanding sampel lain. Secara keseluruhan, MC merupakan filem yang terbaik untuk mengekalkan kelembapan bahan goreng dan mengurangkan penyerapan lemak.

 

Kata kunci: Hidroksipropil metil selulosa; jagung zein; polietilena; selulosa metil; ubi keledek

 

ABSTRACT

 

This study was carried out to evaluate the effect of edible film and polyethylene film (PE) on fried sweet potato (Ipomoea batatas) coating. Slices of sweet potato were coated with edible films which were 0.045 g/mL methylcellulose (MC), 0.045 g/mL hydroxypropyl methylcellulose (HPMC) and 0.16 g/mL corn zein (CZ) before being fried at 170-180°C in palm oil for 3 min. The sweet potato was also coated with inedible polyethylene (PE) film (ratio of PE to oil 1:100 g/g) as comparison. Fried potato without film coating was used as a control sample. The physicochemical characteristics of the coated sweet potato were analyzed. The results indicated that all films could be coated on the surface of the sweet potato. CZ film gave a smooth surface without any crack. MC film gave a non-uniform surface but coated the whole surface of the sample evenly. In addition, MC coated sweet potato showed the least fat percentage (13.6%) and the highest moisture content (17.5%) compared to other samples. Overall, MC is the best edible film to retain moisture and reduce the absorption of fat of fried products.

 

Keywords: Corn zein; hydroxypropyl methylcellulose; methylcellulose; polyethylene; sweet potato

REFERENCES

 

Attila, E.P. & William, O. 2009. Edible films and coating: why, what, and how? Dlm. Embuscado, M.E. & Huber, K.C. (pnyt.). Edible Films and Coatings for Food Applications. New York: Springer. hlm. 1-5.

Bhatt, K.K. & Bhattacharya, S. 2001. Deep fat frying characteristic of chickpea flour suspensions. International Journal of Food Science & Technology 36: 499-507.

Chidanandaiah Keshri, Sanyal, M.K., Kotwal, S.K. & Sudhan, N.A. 2005. Quality changes in enrobed/coated products during storage. Indian Food Industry 24: 57-61.

Feeney, R.D., Haralampu, S.G. & Gross, A.T. 1993. Potato and their food products coated with edible oil barrier films. U.S. Patent: 5, 217, 73.

Gambel, M.H., Rice, P. & Selman, J.D. 1987. Relationship between oil uptake and moisture loss during frying oil potato slice from c.v. Record U.K. tubers. Journal Food Science 22: 233-241.

Kulp, K. & Loewe, R. 1990. Batters and Breadings in Food Processing. St. Paul: American Association of Cereal Chemists.

Loewe, R. 1993. Role of ingredients in batter systems. Cereal Foods World 38(9): 673-677.

Mallikarjuna, P., Balasubramaniam, V.M., Chinnan, M.S. & Phillips, R.D. 1997. Edible coatings for deep-fat frying of starchy products. Journal of LWT-Food Science and Technology 30: 709-714.

María, A.G., Adriana, P., Miriam, N.M. & Noemí, E.Z. 2009. Characterization of starch and composite edible films and coatings. Dlm. Embuscado, M.E. & Huber, K.C. (pnyt.). Edible Films and Coatings for Food Applications. New York: Springer. hlm. 169-209.

Maskat, M.Y., Yip, H.H. & Mahali, H.H. 2005. The performance of a methyl cellulose-treated coating during the frying of a poultry product. International Journal of Food Science and Technology 40: 811-816.

Mehyar, G.F., Al-Ismail, K., Han, J.H. & Chee, G.W. 2012. Characterization of edible coatings consisting of pea starch, whey protein isolate, and Carnauba wax and their effects on oil rancidity and sensory properties of wal-nuts and pine Nuts. Journal of Food Science 77(2): E52-E59.

Meyers, M.A. 1990. Functionality of hydrocolloids in batter coating system. Dlm. Kulp, K. & Loewe, R. (pnyt). Batters and Breadings in Food Processing. St Paul: American Association of Cereal Chemists. hlm. 117-142.

Park, H.J. & Chinnan, M.S. 1995. Gas and water barrier properties of edible films from protein and cellulosic materials. Journal of Food Engineering 25: 497-507.

Park, H.J., Bunn, J.M., Weller, C.L., Vergano, P.J. & Testin, R.F. 1994. Water vapor permeability and mechanical properties of grain protein-based films as affected by mixtures of polyethylene glycol and glycerin plasticizers. Transactions of ASAE 37: 1281-1285.

Pinthus, E.J., Singh, R.P., Rubnov, M. & Saguy, I.S. 1997. Effective water diffusivity in deep-fat fried restructured potato product. International Journal of Food Science & Technology 32: 235-240.

Pinthus, E.J., Weinberg, P. & Saguy, I.S. 1993. Criterion for oil uptake during deep-fat frying. Journal Food Science 58(1): 204-205, 222.

Pomes, A.F. 1971. Zein. Dlm. Mark, H.F., Gaylord, N.G. & Bikales, N.M. (pnyt). Encylopedia of Polymer Science and Technology: Plastic, Resins, Rubber, Fibers. New York: Interscience Publishers. hlm. 125-132.

Rhim, J.W. & Shellhammer, T.H. 2005. Lipid-based edible films and coatings. Dlm Han, J.H. (pnyt). Innovations in Food Packaging. London: Elsevier.

Shukla, R. & Cheryan, M. 2001. Zein: The industrial protein from corn. Industrial Crops and Products 13: 171-192.

Suderman, D.R. 1983. Application of batters and breadings to seafood. Dlm. Suderman, D.R. & Cunningham, F.E. (pnyt). Batter and Breading. Connecticut: AVI Publishing Company. Inc. hlm. 1-14.

Suhaila, M., Norhasimah, A.H. & Mansoor, A.H. 1998. Food components affecting the oil absorption and crispness of fried batter. Journal of the Science of Food and Agriculture 78: 39-45.

Varela, G., Bender, A.E. & Morton, I.D. 1988. Current Facts about the Frying Food. Chichester: Horwood Limited.

Wall, J.S. & Paulis, J.W. 1978. Corn and sorghum grain proteins. Dlm. Pomeranz, Y. (pnyt). Advances in Cereal Science and Technology. St Paul: American Association of Cereal Chemists. hlm. 135-219.

 

 

*Corresponding author; email: rizafizah@ukm.edu.my

 

previous