Sains Malaysiana 45(8)(2016): 1197–1200

Effect of Annealing Temperatures on TiO2 Thin Films Prepared by Spray Pyrolysis Deposition Method

(Kesan Suhu Sepuhlindap ke atas Filem Nipis TiO2 Disediakan melalui Kaedah Semburan Pemendapan Pirolisis)

 

F.I.M. FAZLI*, N. NAYAN, M.K. AHMAD, M.L. MOHD NAPI, N.K.A. HAMED & N.S. KHALID

 

Microelectronics and Nanotechnology-Shamsuddin, Research Centre (MiNT- SRC), Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor Darul Takzim, Malaysia

 

Received: 20 April 2015/Accepted: 12 October 2015

 

 

ABSTRACT

Titanium dioxide (TiO2) nanoparticles thin film has been successfully synthesized by a spray pyrolysis deposition method by using an air compressor on a fluorine-doped tin oxide (FTO) substrate and was annealed at different temperature. TiO2 is the most common oxide as an electrode in dye sensitized solar cell (DSSC) which still has chances of improvements to increase its efficiency as an electrode. The efficiency of a DSSC was relatively low but modifications on every part of a DSSC were currently in research progress and an increase in adsorbed dye molecules was considered a potential. Thus, the influences of annealing temperature on structural and morphological properties of TiO2 have been studied using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM), respectively, while the efficiency of the films in a solar cell was studied by a solar simulator. The FESEM result showed several degrees of porosity obtained by varying the annealing temperature. The crystallinity of TiO2 investigated by XRD showed that the crystallinity of the TiO2 thin films was generally unaffected by the annealing temperature. The relationship between the properties and the efficiency of the films as an electrode was also studied.

 

Keywords: Crystallinity; electrical properties; semiconductor; spray deposition; surface morphology; thin films; TiO2

 

ABSTRAK

Filem nipis nanopartikel titanium dioksida (TiO2) telah berjaya disintesis oleh kaedah pemendapan semburan pirolisis dengan menggunakan pemampat udara pada substrat fluorin-terdop timah oksida (FTO) dan telah disepuhlindap pada suhu yang berbeza. TiO2 adalah oksida yang paling biasa digunakan sebagai elektrod dalam sel solar pekapencelup (DSSC) yang masih mempunyai peluang untuk penambahbaikan bagi meningkatkan kecekapannya sebagai elektrod. Kecekapan DSSC adalah agak rendah tetapi pengubahsuaian pada setiap bahagian DSSC masih dalam proses penyelidikan dan peningkatan dalam jumlah molekul pewarna yang terjerap dianggap berpotensi untuk meningkatkan kecekapan DSSC. Pengaruh suhu penyepuhlindapan pada sifat struktur dan morfologi TiO2 telah dikaji dengan menggunakan pembelauan sinar-X (XRD) dan pelepasan medan mikroskop elektron pengimbas (FESEM) manakala kecekapan filem dalam sel solar telah dikaji oleh simulator suria. Keputusan FESEM menunjukkan beberapa darjah keliangan diperoleh dengan perubahan suhu sepuhlindap. Kehabluran TiO2 yang dikaji oleh XRD menunjukkan bahawa kehabluran filem nipis TiO2 tidak terjejas oleh suhu penyepuhlindapan. Hubungan antara sifat dan kecekapan filem sebagai elektrod juga telah dikaji.

 

Kata kunci: Filem nipis; morfologi permukaan; penghabluran; semburan pemendapan; semikonduktor; sifat elektrik; TiO2

REFERENCES

Ahmad, M.K., Halid, M.L.M., Rasheid, N.A., Ahmed, A.Z., Abdullah, S. & Rusop, M. 2010. Effect of annealing temperatures on surface morphology and electrical properties of titanium dioxide thin films prepared by sol gel method. Journal of Sustainable Energy & Environment 1: 17-20.

Grätzel, M. 2003. Dye-sensitized solar cells. Journal of Photochemistry and Photobiology C: Photochemistry Reviews 4(2): 145-153.

Hasan, M.M., Haseeb, A.S.M.A., Saidur, R. & Masjuki, H.H. 2008. Effects of annealing treatment on optical properties of anatase TiO2 thin films. International Journal of Chemical and Biological Engineering 1(2): 92-95.

Khalil Ebrahim Jasim. 2012. Natural dye-sensitized solar cell based on nanocrystalline TiO2. Sains Malaysiana 41(8): 1011-1016.

Kang, M.G., Ryu, K.S., Chang, S.H., Park, N.G., Hong, J.S. & Kim, K.J. 2003. Dependence of TiO2 film thickness on photocurrent-voltage characteristics of dye-sensitized solar cells. Bull. Korean Chem. Soc. 5(25): 742-744.

Nakade, S., Saito, Y., Kubo, W., Kanzaki, T., Kitamura, T., Wada, Y. & Yanagida, S. 2003. Enhancement of electron transport in nano-porous TiO2 electrodes by dye adsorption. Electrochemistry Communications 5(9): 804-808.

Perednis, D. & Gauckler, L.J. 2005. Thin film deposition using spray pyrolysis. Journal of Electroceramics 14(2): 103-111.

Roy-Mayhew, J.D., Bozym, D.J., Punckt, C. & Aksay, I.A. 2010. Functionalized graphene as a catalytic counter electrode in dye-sensitized solar cells. ACS Nano 4(10): 6203-6211.

 

*Corresponding author; email: fatinizyanimohdfazli@outlook.com

 

 

 

 

previous