Publications
Publication 2021
Publication 2020
Publication 2019
Publication 2018
Publication 2017
Publication 2016
Publication 2015
Publication 2021
| No. | Authors | Manuscript title | Journal | Vol. no., Pages | Year | Index | IF | Quartile | ||
| WOS | SCOPUS | ERA | ||||||||
| 1 | Nurul Nadiah Mahmud, Farah Atiqah Abdul Azam, Mohd Ikram Ramli, Farhana Mohd Foudzi, Kei Ameyama, Abu Bakar Sulong | Rheological Properties Of Irregular-Shaped Titanium-Hydroxyapatite Bimodal Powder Composite Moulded By Powder Injection Moulding | Journal Of Materials Research And Technology | 2255-2264. | 2021 | 1 | 1 | 1 | 5.289 | Q1 |
| 2 | Mohd Yusuf Zakaria, Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Muhammad Hussain Ismail | Application Of Sodium Chloride As Space Holder For Powder Injection Molding Of Alloy Titanium – Hydroxyapatite Composites | Journal Of Materials Research And Technology | 478-486 | 2021 | 1 | 1 | 1 | 5.289 Q2 | Q1 |
| 3 | Mohd Khairul Fadzly Md Radzi, Norhamidi Muhamad, Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Mohd Ramdhan Mohd Khalid, Mohd Rizal Ahmad, Mohd Ikmal Hafizi Azaman, Ahmad Syazwan Ramli, Mohd Azwan Mohd Bakri. | Problems And Constraints Involved In The Injection Moulding Process Of Biocomposites: A Review | Advances In Agricultural And Food Research Journal. | 1–14 | 2021 | – | – | 1 | – | Tiada |
| 4 | Tan Koon Tatt, Norhamidi Muhamad, Andanastuti Muchtar, Abu Bakar Sulong & Kok Yih Shia | Production Of Porous Stainless Steel Using The Space Holder Method | Sains Malaysiana. | 507-514 | 2021 | 1 | 1 | 0.643 | Q4 | |
| 5 | Nisa Naima Khalid, Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong And Farhana Mohd Foudzi | A Review On Bonding Of Polyamide Reinforced Carbon Fibre Via Additive Manufacturing. | Iop Conf. Series: Materials Science And Engineering | 2021 | – | – | – | – | Tiada | |
| 6 | Lohashenpahan Shanmuganantha , Azmi Baharudin , Abu Bakar Sulong , Roslinda Shamsudin And Min Hwei Ng | Prospect Of Metal Ceramic (Titanium-Wollastonite) Composite As Permanent Bone Implants: A Narrative Review | Materials. | 1-24 | 2021 | 1 | 1 | 1 | 3.057 | Q2 |
| 7 | Shabbah Begum, Nor Yuliana Yuhana, Noorashikin Md Saleh, Nur Hidayatul Nazirah Kamarudin, Abu Bakar Sulong. | Review Of Chitosan Composite As A Heavy Metal Adsorbent: Material Preparation And Properties. | Carbohydrate Polymers | 1-9 | 2021 | 1 | 1 | 1 | 7.182 | Q1 |
| 8 | Nabilah Afiqah Mohd Radzuan, Mohammad Afiq Rashid, Dulina Tholibon, Abu Bakar Sulong And Che Hassan Che Haron | Kenaf Reinforced Polypropylene Composites: A Numerical Simulation | Aip Conference Proceedings / 4th International Sciences, Technology & Engineering Conference (Istec) 2020 | 1-9 | 2021 | – | – | – | – | Tiada |
| 9 | Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad | Feedstock properties and debinding mechanism of yttria-stabilized zirconia/ stainless steel 17-4PH micro-components fabricated via two-component micro-powder injection molding process | Ceramics International | 47: 20476-20485 | 2021 | 1 | 1 | 1 | 3.83 | Q1 |
| 10 | N. A. Kasim, M. Z. Nuawi, J. A. Ghani, Muhammad Rizal, N. A. Ngatiman & C. H. C. Haron. | Enhancing Clustering Algorithm With Initial Centroids In Tool Wear Region Recognition | International Journal Of Precision Engineering And Manufacturing. | 843-863. | 2021 | 1 | 1 | 1 | 1.378 | Q4 |
| 11 | Che Hassan Che Haron, Jaharah Abdul Ghani, Muammar Faiq Azhar, Nurul Hayati Abdul Halim, N. Badroush. | Microstructure And Microhardness Alterations Of Inconel 718 Under Cryogenic Cutting. | Journal Of Mechanical Engineering. | 51-64. | 2021 | 1 | 1 | 1 | 0.22 | Tiada |
| 12 | Armansyah Ginting, Che Hassan Che Haron, Issam Bencheikh, Mohammed Nouari 88-112. 2021 1 1 1 | Study On Characteristics Of Altin And Ticn Coating Layers Deposited On Carbide Cutting Tools In Hard Turning Of Steel: Experimental, Simulation And Optimisation | International Journal Of Machining And Machinability Of Materials. | 2021 | – | 1 | 1 | 1.69 | Tiada | |
| 13 | Ahsana Aqilah Ahmad, Jaharah A. Ghani, Che Hassan Che Haron. | Green Lubrication Technique For Sustainable Machining Of Aisi 4340 Alloy Steel. | Jurnal Tribologi. | 1–19 | 2021 | – | 1 | 1 | 0.13 | Tiada |
Publication 2020
| No. | Authors | Manuscript title | Journal | Vol. no., Pages | Year | Index | IF | Quartile | ||
| WOS | SCOPUS | ERA | ||||||||
| 1 | Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad, Najlaa Nazihah Masood, Etta Eshak | Moldability of nano size zirconia for powder injection molding process by using PEG and PMMA binders | Jurnal Kejuruteraan | 335-340 | 2020 | ESCI | – | 1 | – | Tiada |
| 2 | Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad and Che Hassan Che Haron | Effects of high-temperature exposure on the mechanical properties of kenaf composites | Polymers | 41275 | 2020 | 1 | 1 | 1 | 3.164 | Q1 |
| 3 | Youping Gong, Fei Wang, M. S. H. Al Furjan, Lijun Shan, Jingyang He, Xiangjuan Bian,Zhikai Bi, Haiqiang Liu, Wenxin Li, Huifeng Shao, Guojin Chen and Abu Bakar Sulong | Experimental investigation and optimal 3D bioprinting parameters of SA gel porous cartilage scaffold | Applied Sciences | 44562 | 2020 | 1 | 1 | 1 | 2.217 | Q2 |
| 4 | Nabilah Afiqah Mohd Radzuan, Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron | New processing technique for biodegradable kenaf composites: a simple alternative to commercial automotive parts | Composites Part B: Engineering | 44013 | 2020 | 1 | 1 | 1 | 6.864 | Q1 |
| 5 | Farah Atiqah Abdul Azam, Nishata Royan Rajendran Royan, Nor Yuliana Yuhana, Nabilah Afiqah Mohd Radzuan, Sahrim Ahmad and Abu Bakar Sulong | Fabrication of porous recycled hdpe biocomposites foam: effect of rice husk filler contents and surface treatments on the mechanical properties | Polymers | Jan-14 | 2020 | 1 | 1 | 1 | 3.164 | Q1 |
| 6 | Al Basir, Abu Bakar Sulong, Nashrah Hani Jamadon, Norhamidi Muhamad | Bi-material micro-part of stainless steel and zirconia by two-component micro-powder injection molding: rheological properties and solvent debinding behavior | Metals | 42736 | 2020 | 1 | 1 | 1 | 2.259 | Q1 |
| 7 | Majid Niaz Akhtar, Sumbal Javed, Mukhtar Ahmad, Abu Bakar Sulong, Muhammad Azhar Khand | Sol gel derived MnTi doped Co2 W-type hexagonal ferrites: structural, physical, spectral and magnetic evaluations | Ceramics International | 7842-7849 | 2020 | 1 | 1 | 1 | 3.45 | Q1 |
| 8 | Azam FAA, Razak Z, Radzi MFKM, Muhammad N, Haron CHC and Sulong AB | Influence of Multiwalled Carbon Nanotubes on the Rheological Behavior and Physical Properties of Kenaf Fiber-Reinforced Polypropylene Composites . | Polymers | 12 (2083) | 2020 | 1 | 1 | 1 | 3.164 | Q1 |
| 9 | Nurul Hayati Abdul Halim, Che Hassan Che Haron & Jaharah Abdul Ghani | Sustainable Machining Of Hardened Inconel 718: A Comparative Study. International | Journal Of Precision Engineering And Manufacturing | 1375-1387 | 2020 | 1 | 1 | 1 | 1.378 | Q4 |
| 10 | N.N. Nor Hamran, J.A. Ghani, R. Ramli, C.H. Che Haron.1 | A Review On Recent Development Of Minimum Quantity Lubrication For Sustainable Machining. | Journal Of Cleaner Production | 268:122165 | 2020 | 1 | 1 | 1 | 7.246 | Q1 |
| 11 | Shalina Sheikh Muhamad, Jaharah A. Ghani, Che Hassan Che Haron, Hafizal Yazid | Wear Mechanism Of A Coated Carbide Tool In Cryogenic Machining Of Aisi 4340 | Industrial Lubrication And Tribology. | 509-514 | 2020 | – | 1 | 1 | 0.798 | Tiada |
| 12 | Husni Nazra Abu Bakar, Jaharah A. Ghani , Che Hassan Che Haron. | Influence Of Rounded Cutting-Edge Radius And Machining Parameters On Surface Roughness And Tool Wear In Milling Aisi H13 Steel Under Dry And Cryogenic Machining. | Jurnal Tribologi. | 52-64. | 2020 | – | – | – | 0.13 | Tiada |
| 13 | Shalina Sheik Muhamad, Jaharah A. Ghani, Che Hassan Che Haron, And Hafizal Yazid. | Cryogenic Milling And Formation Of Nanostructured Machined Surface Of Aisi 4340. | Nanotechnology Reviews. | 1104-1117. | 2020 | 1 | 1 | 1 | 3.639 | Q2 |
Publication 2019
| No. | Authors | Manuscript title | Journal | Vol.no., Page | Year | Index | IF | Quartile | ||
| WOS | SCOPUS | ERA | ||||||||
| 1 | Rosli, R.E., Sulong, A.B., Daud, W.R.W., Zulkifley, M.A., Rosli, M.I., Majlan, E.H., Haque, M.A. & Radzuan N.A.M. | The design and development of an HT-PEMFC test cell and test station | International Journal of Hydrogen Energy | 30763-30771 | 2019 | 1 | 1 | 1 | 4.229 | Q1 |
| 2 | Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu | Influence the filler orientation on the performance of bipolar plate | Sains Malaysiana | 669-676 | 2019 | 1 | 1 | 1 | 0.565 | Q3 |
| 3 | Dulina Tholibon, Izdihar Tharazi, Abu Bakar Sulong, Norhamidi Muhamad, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi ,Nabilah Afiqah Mohd Radzuan, David Hui1 | Kenaf fiber composites: a review on synthetic and biodegradable polymer matrix | Jurnal Kejuruteraan | 65-76 | 2019 | – | 1 | 1 | – | Tiada |
| 4 | Mohd Yusuf Zakaria, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Ikram Ramli | Rheological properties of titanium-hydroxyapatite with powder space holder composite feedstock for powder injection moulding | International Journal of Advanced Manufacturing Technology | 2591-2599 | 2019 | 1 | 1 | 1 | 2.601 | Q2 |
| 5 | Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria | Effect of sintering on the microstructure and mechanical properties of alloy titaniumwollastonite composite fabricated by powder injection moulding process | Ceramics International | 11648-11653 | 2019 | 1 | 1 | 1 | 3.057 | Q1 |
| 6 | Nabilah Afiqah Mohd Radzuan , Abu Bakar Sulong, David Hui and Anil Verma | Electrical Conductivity Performance of Predicted Modified Fibre Contact Model for Multi-Filler Polymer Composite | Polymers | 1-Dec 2019 | 2019 | 1 | 1 | 1 | 2.935 | Q1 |
| 7 | Hashim Hanizam, Mohd Shukor Salleh, Mohd Zaidi Omar, Abu Bakar Sulong | Optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes-aluminium alloy composite through Taguchi method | Journal of Materials Research and Technology-JMR&T | 2223-2231 | 2019 | 1 | 1 | 1 | 3.398 | Q1 |
| 8 | Nabilah Afiqah Mohd Radzuan, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi, Zakaria bin Razak, Izdihar binti Tharizi, Abu Bakar Sulong, Che Hassan Che Haron, Norhamidi Muhamad | Kenaf composites for automotive components: enhancement in machinability and moldability | Polymers | 1-Oct 2019 | 2019 | 1 | 1 | 1 | 2.935 | Q1 |
| 9 | Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu, Ahmad Tajuddin Abdullah, Teuku Husaini, Ros Emilia Rosli, Edy Herianto Majlan, Masli Irwan Rosli | Fibre orientation effect on polypropylene/milled carbon fiber composites in the presence of carbon nanotubes or graphene as a secondary filler: application on PEM fuel cell bipolar plate | International Journal of Hydrogen Energy | 30618-30626 | 2019 | 1 | 1 | 1 | 4.229 | Q1 |
| 10 | Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Mohd Khairul Fadzly Md Radzi, Nur Farhani Ismail, Dulina Tholibon, Izdihar Tharazi | Effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites | Composites Part B: Engineering | 168: 159-165 | 2019 | 1 | 1 | 1 | 4.92 | Q1 |
| 11 | Mohd Yusuf Zakaria, Abu Bakar Sulong, Norhamidi Muhamad, Muhammad Rafi Raza, Mohd Ikram Ramli | Incorporation of wollastonite bioactive ceramic with titanium for medical applications: An overview | Materials Science & Engineering C | 97: 884-895 | 2019 | 1 | 1 | 1 | 5.08 | Q1 |
| 12 | Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Teuku Husaini, Edy Herianto Majlan, Masli Irwan Rosli, Muhammad Firdaus Aman | Fabrication of multi-filler MCF/MWCNT/SG-based bipolar plates | Ceramics International | 45( 6): 7413-7418 | 2019 | 1 | 1 | 1 | 3.057 | Q1 |
| 13 | H. Hanizam, M.S. Salleh, M.Z. Omar, A.B. Sulong | Effects of mechanical stirring and short heat treatment on thixoformed of carbon nanotube aluminium alloy composite | Journal of Alloys and Compounds | 83-90 | 2019 | 1 | 1 | 1 | 3.779 | Q1 |
| 14 | Lijun Shan, Abdul Amir H. Kadhum, M.S.H. Al-Furjan, Wenjian Weng, Youping Gong, Kui Cheng, Maoying Zhou, Lingqing Dong, Guojin Chen, Mohd S. Takriff, Abu Bakar Sulong | In situ controlled surface microstructure of 3D printed Ti alloy to promote its osteointegration | Materials | Jan-13 | 2019 | 1 | 1 | 1 | 2.467 | Q2 |
| 15 | Md Ahsanul Haque, Abu Bakar Sulong, Edy Herianto Majlan, Kee Shyuan Loh, Teuku Husaini, Rosemilia Rosli | Oxygen reduction reaction behaviours of carbon nanotubes supporting Pt catalyst for proton exchange membrane fuel cell | Malaysian Journal of Analytical Sciences | 147-154 | 2019 | – | – | 1 | – | Tiada |
| 16 | M. A. Haque, A. B. Sulong, E. H. Majlan, K. S. Loh, T. Husaini, R. Rosli | Physiochemical characteristics of solid electrolyte membranes for high-temperature PEM fuel cell | International Journal of Electrochemical Science | 14: 371 – 386, | 2019 | 1 | 1 | 1 | 1.369 | Q4 |
| 17 | Iswandi, Abu Bakar Sulong, Teuku Husaini | Effects of graphite/polypropylene on the electrical conductivity of manufactured bipolar plate | Malaysian Journal of Analytical Sciences | 355-361 | 2019 | – | – | 1 | – | Tiada |
| 18 | Nurato, Edy Herianto Majlan, Wan Ramli Wan Daud, Teuku Husaini, Masli Irwan Rosli, Abu Bakar Sulong, Darwin Sebayang | Finite element analysis for stress distribution in a proton exchange membrane fuel cell stack | International Journal of Integrated Engineering | 233-240 | 2019 | 1 | 1 | – | – | Tiada |
| 19 | Dulina Tholibon, Izdihar Tharazi, Abu Bakar Sulong, Norhamidi Muhamad, Nur Farhani Ismail, Mohd Khairul Fadzly Md Radzi ,Nabilah Afiqah Mohd Radzuan, David Hui 2019 1 – | Kenaf fiber composites: a review on synthetic and biodegradable polymer matrix | Jurnal Kejuruteraan | 65-76 | 2019 | ESCI | – | – | – | Tiada |
Publication 2018
| No. | Authors | Manuscript title | Journal | Vol.no., Page | Year | Index | IF | Quartile | ||
| WOS | SCOPUS | ERA | ||||||||
| 1 | Majid Niaz Akhtar, Abu Bakar Sulong, A. Umer, Ammar Bin Yousaf, Muhammad Azhar Khan | Multi-component MWCNT/NG/EP-based bipolar plates with enhanced mechanical and electrical characteristics fabricated by compression moulding | Ceramics International | 2018 | 1 | 1 | 1 | 2.986 | Q1 | |
| 2 | Majid Jafarzadehghoushji, R. Alebrahim, Rozli Zulkifli, Abu Bakar Sulong, Shahrum Abdullah, Che Husna Azhari | Crashworthiness characteristics of natural ramie/bio-epoxy composite tubes for energy absorption application | Iranian Polymer Journal | 2018 | 1 | 1 | 1.422 | Q3 | ||
| 3 | Ukwueze, Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad, Zainuddin Sajuri | Solvent de-binding of bi-material green component of two-component powder injection moulded stainless steel and zirconia | International Journal of Mechanical & Mechatronics Engineering | 2018 | 1 | – | Tiada | |||
| 4 | N.F. Ismail, N. Muhamad, A.B. Sulong & C.H.C. Haron | Effects of alkali treatment on mechanical properties of epoxy composites reinforced kenaf fibre using compression moulding process | International Journal of Mechanical & Mechatronics Engineering | 2018 | 1 | – | Tiada | |||
| 5 | Najlaa Nazihah Mas’ood, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farhana Mohd Foudzi, Mohd Ikram Ramli, Farrahshaida Mohd Salleh | Flow behavior and injectability of SS17-4PH with PS and PE binders in powder injection molding | Journal of Advanced Research in Fluid Mechanics and Thermal Sciences | 2018 | 1 | – | Tiada | |||
| 6 | Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Amir Arifin, Farhana Mohd Foudzi , Mohannad Saleh Hammadi Al-Furjan | Effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel-hydroxyapatite composite | PLoS One | 2018 | 1 | 1 | 1 | 2.806 | Q1 | |
| 7 | Nor Nabilla Kadiman, Muhammad Omar Abdul Rashid, Norhamidi Muhamad dan Abu Bakar Sulong | Effects of sintering temperature on the physical and mechanical properties of injection-molded copper/graphene composite | Journal of Advanced Manufacturing Technology | 2018 | 1 | – | Tiada | |||
| 8 | Mohd Yusuf Zakaria, Abu Bakar Sulong, Mohd Ikram Ramli, Bonaventure Ukwueze, Wan Sharuzi Wan Harun dan Rahimi L. Mahmud | Fabrication of porous titaniumhydroxyapatite composite via powder metallurgy with space holder method | Journal of Advanced Manufacturing Technology | 2018 | 1 | – | Tiada | |||
| 9 | Abu Bakar Sulong, Nabilah Afiqah Mohd Radzuan, Mohd Rizal Mamat,Izdihar Tharazi, Dulina Tholibon, Radwan Dweiri, Mohannad Saleh Hammadi | Kenaf reinforced PLA composite thermoforming: a numerical simulation | International Journal of Integrated Engineering | 2018 | 1 | 1 | 1 | – | Tiada | |
| 10 | Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Che Hassan Che Haron, Mohd Khairol Fadzly Md Radzi, Dulina Tholibon, Izdihar Tharazi & Nur Farhani Ismail | The effects of maleic anhydride grafted PP (MAPP) on the mechanical properties of injection moulded kenaf/CNTs/PP composites | Sains Malaysiana | 2018 | 1 | 1 | 0.47 | Q3 | ||
| 11 | Nor Nabilla Kadiman, Julie Elvyana Romli, Norhamidi Muhamad, Abu Bakar Sulong & Farhana Mohd Foudzi | Pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi | Sains Malaysiana | 2018 | 1 | 1 | 0.47 | Q3 | ||
| 12 | Radwan Dweiri, Hendra Suherman, Abu Bakar Sulong and Jafar F. Al-Sharab | Structure-property-processing investigation of electrically conductive polypropylene nanocomposites | Science and Engineering of Composite Materials | 2018 | 1 | 1 | 0.48 | Q4 | ||
| 13 | A A Abdullah, H Norita, H N Azlina, A B Sulong, N N Masood | Preparation of SS316L MIM feedstock with biopolymer as a binder | IOP Conference Series: Materials Science and Engineering | 2018 | 1 | 1 | – | Tiada | ||
| 14 | Hendra Suherman, Abu Bakar Sulong, Mohd Yusuf Zakaria, Nishata Royan, and Jaafar Sahari | Electrical conductivity and physical changes of functionalized carbon nanotube/graphite/stainless steel (SS316L)/polypropylene composites immersed in an acidic solution | Songklanakarin Journal of Science and Technology | 2018 | 1 | – | Tiada | |||
| 15 | Zakaria Razak , Abu Bakar Sulong, Norhamidi Muhamad, Mohd. Khairul Fadzly Md Radzi, Nur Farhani Ismail, Dulina Tholibon and Izdihar Tharazi | Numerical simulation analysis of wood/PP composites for injection-moulded car battery trays | International Journal of Engineering and Technology(UAE) | 2018 | 1 | – | Tiada | |||
| 16 | Majid Niaz Akhtar, A.B. Sulong, M.N. Akhtar, Muhammad Azhar Khan | Systematic study of Ce3þ on the structural and magnetic properties of Cu nanosized ferrites for potential applications | Journal of Rare Earths | 156-164 | 2018 | 1 | 1 | 2.429 | Q2 | |
| 17 | Abdolali Fayyaz, Norhamidi Muhamad, Abu Bakar Sulong | Microstructure and physical and mechanical properties of micro cemented carbide injection | Powder Technology | 151-158 | 2018 | 1 | 1 | 2.942 | Q1 | |
| 18 | Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong , Mahendra Rao Somalu , Edy Herianto Majlan, Teuku Husaini and Masli Irwan Rosli | Effects of die configuration on the electrical conductivity of polypropylene reinforced milled carbon fibers: an application on a bipolar plate | Polymers | 2018 | 1 | 1 | 1 | 3.364 | Q1 | |
| 19 | Qian Wen Yean, Abu Bakar Sulong, Soon Huat Tan | Asymmetric membrane containing electrospun Cu-BTC/poly(vinyl alcohol) for pervaporation dehydration of 1,4-dioxane | Separation and Purification Technology | 2018 | 1 | 1 | 1 | 3.359 | Q1 | |
| 20 | Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Amir Arifin, Farhana Mohd Foudzi, Mohannad Saleh Hammadi Al-Furjan | Effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel hydroxyapatite composite | PLoS ONE | Jan-17 | 2018 | 1 | 1 | 1 | 2.806 | Q1 |
| 21 | Najla Nazihah Mas’ood, Farhana Mohd Foudzi, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farrahshaida Mohd Salleh, Ukwueze Bonaventure Emeka | Two component materials in powder metallurgy: a review paper focused on the processing technique applied in powder metallurgy | Jurnal Kejuruteraan | 23-31 | 2018 | 1 | – | Tiada | ||
| 22 | Najla Nazihah Mas’ood, Abu Bakar Sulong, Norhamidi Muhamad, Intan Fadhlina Mohamed, Farhana Mohd Foudzi, Mohd Ikram Ramli, Farrahshaida Mohd Salleh | Flow behavior and injectability of SS17-4PH with PS and PE binders in powder injection molding | Journal of Advanced Research in Fluid Mechanics and Thermal Sciences | 121-125 | 2018 | 1 | – | Tiada | ||
| 23 | Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria | Pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit | Sains Malaysiana | 2018 | 1 | 1 | 0.47 | Q3 | ||
| 24 | Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu,Hendra Suherman | Electrical conductivity models of die configuration for polypropylene-reinforced milled carbon fibre | Journal of Advanced Manufacturing Technology | 2018 | 1 | – | Tiada | |||
| 25 | Teuku Husaini, Shuhaimi, Abu Bakar Sulong | Effect of Temperature on the Mechanical Performance of Highly Conductive Composites for HT-PEMFC Application | Jurnal Kejuruteraan | 2018 | 1 | – | Tiada | |||
| 26 | Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana, Ruey Shan Chen, Mohd Hafizuddin Ab Ghani, Sahrim Ahmad | UV/O3 treatment as a surface modification of rice husk towards preparation of novel biocomposites | PLOS One | 2018 | 1 | 1 | 1 | 2.806 | Q1 | |
| 27 | Ukwueze, Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad, Zainuddin Sajuri | Solvent de-binding of bi-material green component of two-component powder injection moulded stainless steel and zirconia | International Journal of Mechanical & Mechatronics Engineering | 2018 | 1 | – | Tiada | |||
| 28 | W.S.W. Harun, M.S.I.N. Kamariah, N.Muhamad, S.A.C. Ghani, F. Ahmad, Z. Mohamed | A review of powder additive manufacturing processes for metallic biomaterials | Powder Technology | 2018 | 1 | 1 | 1 | 2.942 | Q1 | |
Publication 2017
| No. | Authors | Manuscript title | Journal | Vol. no., Pages | Year | Index | IF | Quartile | ||
| WOS | SCOPUS | ERA | ||||||||
| 1 | Nabilah Afiqah Mohd Radzuan,Mohd Yusuf Zakaria, Abu Bakar Sulong,Jaafar Sahari | The Effect of Milled Carbon Fibre Filler on Electrical Conductivity In Highly Conductive Polymer Composites | Composites Part B: Engineering | 153-160 | 2017 | 1 | 1 | 1 | 3.85 | Q1 |
| 2 | M. Ahsanul Haque , A.B. Sulong, K.S. Loh, E. Herianto Majlan,T. Husaini, R. Emilia Rosli | Acid doped polybenzimidazoles based membrane electrode assembly for high temperature proton exchange membrane fuel cell: A review | International Journal Hydrogen Energy | 9156-9179 | 2017 | 1 | 1 | 1 | 3.205 | Q2 |
| 3 | Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Jaafar Sahari | A review of electrical conductivity models for conductive polymer composite | International Journal of Hydrogen Energy | 9262-9273 | 2017 | 1 | 1 | 1 | 3.205 | Q2 |
| 4 | Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir and Ahmed A. Al Amiery | Optimizing physio Mechanical Properties of Halloysite Reinforced Polyurethane Nanocomposites by Taguchi Approach | Science of Advanced Materials | Jan-13 | 2017 | 1 | 1 | 1 | 1.812 | Q2 |
| 5 | Majid Niaz Akhtar, A. Rahman, A.B. Sulong, Muhammad Azhar Khan | Structural, spectral, dielectric and magnetic properties of Ni0.5MgxZn0.5-xFe2O4 nanosized ferrites for microwave absorption and high frequency applications | Ceramics International | 4357-4365 | 2017 | 1 | 1 | 1 | 2.758 | Q1 |
| 6 | Tayser Sumer Gaaz, Abdul Amir H Kadhum, Patina Kiah Anak Michael, Ahmed Al AMiery, Abu bakar Sulong, Abu Bakar Sulong, Mohamed H Nassir, Ahmed Hameed Jaaz | Unique Halloysite Nanotubes Polyvinyl Alcohol Polyvinylpyrrolidone Composite Complemented with Physico Chemical Characterization | Polymers | 207-222 | 2017 | 1 | 1 | 2.944 | Q1 | |
| 7 | Mohd Ikram Ramli, Abu Bakar Sulong, Norhamidi Muhamad, Andanastuti Muchtar, Mohd Yusuf Zakaria | Rheological Properties Of Titanium Alloy Ti6Al4V Wollastonite W Composite Using Palm Stearin as Based Binder | Journal of Mechanical Engineering | 87-96 | 2017 | 1 | – | Tiada | ||
| 8 | Mohd Yusuf Zakaria, Abu Bakar Sulong, Mohd Ikram Ramli, Muhammad Rafi Raza | Determination of Critical Powder Loading of Titanium Hydroxyapatite with Powder Space Holder for Powder Injection Molding Feedstocks | Journal of Mechanical Engineering | Nov-21 | 2017 | 1 | – | Tiada | ||
| 9 | Nur Farhani Ismail, Norhamidi Muhamad, Abu Bakar Sulong, Che Hassan Che Haron, Dulina Tholibon, Izdihar Tharazi, Mohd Khairul Fadzly MdRadzi, Zakaria Razak | Mechanical Properties of Compression Molded Epoxy Polymer Composites Reinforced with Kenaf Fibers | Journal of Mechanical Engineering | 1-Dec | 2017 | 1 | – | Tiada | ||
| 10 | Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhamad, Nur Farhani Ismail, Izdihar Tharazi, Mohd Khairul Fadzly Md Radzi | Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design | Journal of Mechanical Engineering | 23-35 | 2017 | 1 | – | Tiada | ||
| 11 | Zakaria Razak, Abu Bakar Sulong, Norhamidi Muhamad, Mohd Khairul Fadzly MdRadzi, Dulina Tholibon, Izdihar Tharazi, Nur Farhani Ismail | Effect of Multi-walled Carbon Nanotube on Mechanical Properties of Kenaf/Polypropylene Composites | Journal of Mechanical Engineering | 107-117 | 2017 | 1 | – | Tiada | ||
| 12 | Ghoushji, M.J., Eshkoor, R.A., Zulkifli, R., Sulong, A.B., Abdullah, S., Azhari, C.H. | Energy Absorption Capability of Axially Compressed Woven Natural Ramie/Green Epoxy Square Composite Tubes | Journal of Reinforced Plastics and Composites | 1028-1037 | 2017 | 1 | 1 | 1 | 0.901 | Q3 |
| 13 | Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu | Electrical properties of extruded milled carbon fibre and polypropylene | Journal of Composite Materials | 3187-3195 | 2017 | 1 | 1 | 1 | 1.242 | Q2 |
| 14 | Salleh, F.M., Sulong, A.B., Raza, M.R., Muhamad,N., Fhang, L.T | Effect of space holders on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding | Sains Malaysiana | 1651-1657 | 2017 | 1 | 1 | 0.35 | Q3 | |
| 15 | Gaaz, TS., Sulong, A.B., Ansari, M.N.M., Kadhum, A.A.H., Al-Amiery, A.A., Nassir, M.H. | Effects of starch loading on the thermo mechanical and morphological properties of polyurethane composites | Materials | Jan-14 | 2017 | 1 | 1 | 2.728 | Q1 | |
| 16 | Gaaz, T.S., Sulong, A.B., Kadhum, A.A.H., Al-Amiery, A.A., Nassir, M.H., Jaaz, A.H. | The impact of halloysite on the thermo-mechanical properties of polymer composites | Molecules | 838-858 | 2017 | 1 | 1 | 2.465 | Q2 | |
| 17 | Raza, M.R., Ahmad, F., Muhamad, N., Sulong, A.B., Omar, M.A., Akhtar, M.N., Aslam, M., Sherazi, I. | Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L – stainless steel | Sains Malaysiana | 285-293 | 2017 | 1 | 1 | 0.35 | Q3 | |
| 18 | Gaaz, T.S., Sulong, A.B., Kadhum, A.A.H., Nassir, M.H., Al-Amiery, A.A. | Surface improvement of halloysite nanotubes | Applied Sciences (Switzerland) | 291-299 | 2017 | 1 | 1 | 1.726 | Q2 | |
| 19 | Salleh F.M., Sulong A.B., Raza M.R., Muhamad N., Fhang L.T. | Effects of space holder on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding | Sains Malaysiana | 2017 | 1 | 1 | 0.47 | Q3 | ||
| 20 | Tayser Sumer Gaaz , Abu Bakar Sulong , Abdul Amir H. Kadhum , Mohamed H. Nassir , Ahmed A. Al-Amiery | Absolute variation of the mechanical characteristics of halloysite reinforced polyurethane nanocomposites complemented by Taguchi and ANOVA approaches | Results in Physics | 3287-3300 | 2017 | 1 | 1 | 1.337 | Q2 | |
| 21 | M.F.F.A.Hamidi, W.S.W.Harun, M.Samykano, S.A.C.Ghani, Z.Ghazali, F.Ahmad, A.B.Sulong | A review of biocompatible metal injection moulding process parameters for biomedical applications | Materials Science and Engineering C | 1263-1276 | 2017 | 1 | 1 | 3.42 | Q2 | |
| 22 | Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana,Mohd Hafizuddin Ab Ghani,Sahrim Ahmad | Pengoptimumam pemprosesan komposit rHDPE berpenguat sekam padi dengan kaedah Tindak Balas Permukaan (RSM) | Sains Malaysiana | 2017 | 1 | 1 | 0.35 | Q3 | ||
| 23 | Majid J Ghoushji, Rahim A Eshkoor, Rozli Zulkifli, Abu B Sulong, Shahrum Abdullah and Che H Azhari | Energy absorption capability of axially compressed woven natural ramie/green epoxy square composite tubes | Journal of Reinforced Plastics and Composites | 2017 | 1 | 1 | 1 | 0.901 | Q3 | |
| 24 | Amir Arifin, Abu Bakar Sulong, Lee Choy Fun, Gunawan and Irsyadi Yani | Porous titanium alloy/hydroxyapatite composite using powder compaction route | Journal of Mechanical Engineering and Sciences | 2017 | 1 | 1 | – | Tiada | ||
| 25 | Ukwueze Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad, Zainuddin Sajuri & Farrahshaida Salleh | Two component injection moulding of bimaterial of stainless steel and yttria stabilized zirconia green part | Jurnal Kejuruteraan | 49-55 | 2017 | 1 | – | Tiada | ||
| 26 | Asri,N.F., Husaini,T., Majlan, E.H., Sulong,A.B., Daud, W.R.W. | Electrochemical behaviour and of Ti-6Al-4V and SUS 316L plates with potential application as a bipolar plate in PEMFC | Journal of Mechanical Engineering | 155-170 | 2017 | 1 | – | Tiada | ||
| 27 | Ukwueze Bonaventure Emeka, Abu Bakar Sulong, Norhamidi Muhamad, Zainuddin Sajuri | The characterization and rheological investigation of materials for powder injection molding | Journal of Mechanical Engineering | 97-107 | 2017 | 1 | – | Tiada | ||
| 28 | Gaaz,T.S., Sulong, A.B., Kadhum, A.H. | Influence of Sulfuric Acid on the Tensile Properties of Halloysite reinforced polyurethane composite | Journal of Mechanical Engineering | 1-Oct | 2017 | 1 | – | Tiada | ||
| 29 | Ahmad,R.N., Muhamad,N., Sulong, A.B., Wahi, A., Salleh, F.M. | Rheological properties of titanium niobium based feedstocks for metal injection molding | Journal of Mechanical Engineering | 139-149 | 2017 | 1 | – | Tiada | ||
| 30 | Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana Mohd, Mohd Hafizuddin Abdul Ghani, Sahrim Ahmad | Effect UV/O3 modified rice husk on the mechanical properties of recycle HDPE rice husk composite | Journal of Mechanical Engineering | 13-22 | 2017 | 1 | – | Tiada | ||
| 31 | Nishata Royan Rajendran Royan, Abu Bakar Sulong, Nor Yuliana Yuhana, Mohd Hafizuddin Ab Ghani, Sahrim Ahmad | Pengoptimumam pemprosesan komposit rHDPE berpenguat sekam padi dengan kaedah tindak balas permukaan (RSM) | Sains Malaysiana | 1749-1756 | 2017 | 1 | 1 | 1.269 | Q4 | |
| 32 | Nur Fawwaz Asri, Teuku Husaini, Abu Bakar Sulong, Edy Herianto Majlan, Wan Ramli Wan Daud | Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review | International Journal of Hydrogen Energy | 9135-9148 | 2017 | 1 | 1 | 1 | 3.205 | Q2 |
| 33 | R.E. Rosli, A.B. Sulong, W.R.W. Daud, M.A. Zulkifley, T. Husaini, M.I. Rosli, E.H. Majlan, M.A. Haque | A review of high-temperature proton exchange membrane fuel cell (HT-PEMFC) system | International Journal of Hydrogen Energy | 9293-9314 | 2017 | 1 | 1 | 1 | 3.205 | Q2 |
| 34 | Nur Fawwaz Asri, T. Husaini, Edy Herianto Majlan, Abu Bakar Sulong, Wan Ramli Wan Daud | Electrochemical Behaviour and Interfacial Contact Resistance of Ti-6Al-4V and SUS 316L plates with Potential Application as a Bipolar Plate in PEMFC | Journal of Mechanical Engineering | 155-170 | 2017 | 1 | – | Tiada | ||
| 35 | Sarizal Md Ani, Andanastuti Muchtar, Norhamidi Muhamad & Jaharah A. Ghani | Kesan suhu pensinteran terhadap sifat mekanik dan mikrostruktur alumina zirkonia yang difabrikasi dengan kaedah pengacuan suntikan seramik | Sains Malaysiana | 1979-1986 | 2017 | 1 | 1 | 0.35 | Q3 | |
Publication 2016
| No. | Authors | Manuscript title | Journal | Vol. no., Pages | Year | Index | IF | Quartile | ||
| WOS | SCOPUS | ERA | ||||||||
| 1 | Majid Niaz Akhtar, Abu Bakar Sulong, Muhammad Azhar Khan, Mukhtar Ahmad, Ghulam Murtaza, M.R. Raza, R. Raza, M. Saleem, M. Kashiff | Structural and Magnetic Properties of Yttrium Iron Garnet (YIG) and Yttrium Aluminum Iron Garnet (YAIG) Nanoferrites Prepared by Microemulsion Method | Journal of Magnetism and Magnetic Materials | 425-431 | 2016 | 1 | 1 | 1 | 1.97 | Q2 |
| 2 | Dulina Tholibon, Abu Bakar Sulong, Norhamidi Muhammad, Nur Farhani Ismail, Izdihar Tharazi, Mohd Khairul Fadzly Md Radzi | Tensile properties of unidirectional kenaf fiber polypropylene composite | Jurnal Teknologi | 101-106 | 2016 | 1 | – | Tiada | ||
| 3 | Mohd Khairul Fadzly Md Radzi, Abu Bakar Sulong, Baharuddin Mohd Zanggi, Norhamidi Muhammad | Mouldability of wood filler reinforced polypropylene composite for injection moulded engine cover using mould filing simulation | Jurnal Teknologi | 75-81 | 2016 | 1 | – | Tiada | ||
| 4 | Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum | Effect of HNTs Addition in the Injection Moulded Thermoplastic Polyurethane Matrix on the Mechanical and Thermal Properties | Sains Malaysiana | 1235-1242 | 2016 | 1 | 1 | 0.446 | Q3 | |
| 5 | Tayser Sumer Gaas, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir and Ahmed A. Al Amiery | Optimizing injection molding parameters of different halloysites type reinforced thermoplastic polyurethane nanocomposites via taguchi complemented with ANOVA | Materials | Jan-19 | 2016 | 1 | 1 | 1 | 2.651 | Q1 |
| 6 | Nurul Akidah Baharuddin, Andanastuti Muchtar, Mahendra Rao Somalu, Abu Bakar Sulong, Huda Abdullah | Pengaruh Suhu Sinter terhadap Prestasi Elektrokimia Katod Komposit Sel Bahan Api Oksida Pepejal (SOFC) LSCF-SDCC | Sains Malaysiana | 459-465 | 2016 | 1 | 1 | 0.446 | Q3 | |
| 7 | Majid Niaz Akhtar, Abu Bakar Sulong , Mukhtar Ahmad, Muhammad Azhar Khan,Akbar Ali, M.U. Islam | Impacts of GdeCe on the structural, morphological and magnetic properties of garnet nanocrystalline ferrites synthesized via solegel route | Journal of Alloys and Compounds | 486-495 | 2016 | 1 | 1 | 1 | 2.999 | Q1 |
| 8 | Majid Niaz Akhtar, Abu Bakar Sulong, Saniah Ab Karim, Che Husna Azhari, MR Raza | Evaluation of thermal, morphological and mechanical properties of PMMA/NaCl/DMF electrospun nanofibers: an investigation through surface methodology approach | Iranian Polymer Journal | 1025-1038 | 2016 | 1 | 1 | 1.806 | Q2 | |
| 9 | Muhammad Rafi Raza, Faiz Ahmad, Norhamidi Muhamad , Abu Bakar Sulong , M.A. Omar,Majid Niaz Akhtar, Muhammad Aslam | Effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 L stainless steel | Powder Technology | 135-142 | 2016 | 1 | 1 | 1 | 2.349 | Q2 |
| 10 | Abu Bakar Sulong, Amir Arifin, Zambri Harun | JIG prototype for computer-assisted total knee replacement and its flow simulation | International Journal of Technology | 132-140 | 2016 | 1 | – | Tiada | ||
| 11 | Tayser Sumer Gaaz, Abu Bakar Sulong, Abdul Amir H. Kadhum, Mohamed H. Nassir and Ahmed A. Al-Amiery | Impact of Sulfuric Acid Treatment of Halloysite on Physico-Chemic Property Modification | Materials | Jan-16 | 2016 | 1 | 1 | 1 | 2.651 | Q1 |
| 12 | Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong, Mahendra Rao Somalu | Pengoptimuman Proses Penyemperitan Gentian Karbon Terkisar dan Polipropilena Bagi Komposit Polimer Pengalir | Sains Malaysiana | 1913-1921 | 2016 | 1 | 1 | 0.446 | Q3 | |
| 13 | Majid Niaz Akhtara, Abu Bakar Sulong, M.K. Fadzly Radzi, N.F. Ismail, M.R. Razab, Norhamidi Muhamad, Muhammad Azhar Khan | Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications | Progress in Natural Science: Materials International | 657-664 | 2016 | 1 | 1 | 1 | 1.873 | Q2 |
| 14 | Gaaz, T.S., Sulong, A.B., Ansari,M.N.M., H Kadhum, A.A., Al-Amiery, A.A., Al-Furjan, M.S.H. | Effect of halloysite nanotubes loading on thermo-mechanical and morphological properties of polyurethane nanocomposites | Materials Technology | 430-442 | 2016 | 1 | 1 | 1.227 | Q3 | |
| 15 | Iswandi, Jaafar Sahari, Abu Bakar Sulong, Teuku Husaini | Critical powder loading and rheological properties of polypropylene/graphite composite feedstock for bipolar plate application | Malaysian Journal of Analytical Sciences | 687-696 | 2016 | 1 | – | Tiada | ||
| 16 | Tatt T.K., Muhamad N., Muchtar A., Sulong A.B., Cherng N.M. | Influence of sintering parameters on the compressive yield strength of stainless steel foams produced by the space holder method | Sains Malaysiana | 653-658 | 2016 | 1 | 1 | 0.446 | Tiada | |
| 17 | Wahi A., Muhamad N., Sulong A.B., Ahmad R.N. | Effect of sintering temperature on density, hardness and strength of MIM Co30Cr6Mo biomedical alloy | Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 434-437 | 2016 | 1 | – | Tiada | ||
| 18 | Baharuddin N.A., Muchtar A., Somalu M.R., Sulong A.B., Abdullah H. | Effects of sintering temperature on the electrochemical performance of solid oxide fuel cell (SOFC) composite cathode LSCF-SDCC | Sains Malaysiana | 459-465 | 2016 | 1 | 1 | 0.446 | Q4 | |
| 19 | Muhammad Rafi Raza, Faiz Ahmad, Norhamidi Muhamad , Abu Bakar Sulong , M.A. Omar,Majid Niaz Akhtar, Muhammad Aslam | Effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 L stainless steel | Powder Technology | 135-142 | 2016 | 1 | 1 | 1 | 2.349 | Q2 |
Publication 2015
| No. | Authors | Manuscript title | Journal | Vol. no., Pages | Year | Index | IF | Quartile | ||
| WOS | SCOPUS | ERA | ||||||||
| 1 | Mohd Yusuf Zakaria, Abu Bakar Sulong, Jaafar Sahari, Hendra Suherman, | Effect of the addition of milled carbon fiber as a secondary filler on the electrical conductivity of graphite/epoxy composites for electrical conductive materials | Composite Part B | 75-80 | 2015 | 1 | 1 | 3.242 | Q1 | |
| 2 | Amir Arifin, Abu Bakar Sulong, Norhamidi Muhamad, Junaidi Syarif, Mohd Ikram Ramli | Powder injection molding of HA Ti6Al4V composite using palm stearin as based binder for implant material | Material and Design | 1028-1034 | 2015 | 1 | 1 | 3.171 | Q1 | |
| 3 | J. Rajabi, A. B. Sulong, N. Muhamad, M. R. Raza | Powder compaction of bi-materials:stainless steel 316L and nanocrystaline yttria stabilized zirconia | Materials Technology | 313-320 | 2015 | 1 | 1 | 1 | 0.746 | Q3 |
| 4 | Amir Arifin, Abu Bakar Sulong, Norhamidi Muhamad, Junaidi Syarif | Characterization of hydroxyapatite ti6al4v composite powder under various sintering temperature | Jurnal Teknologi | 27-31 | 2015 | 1 | – | Tiada | ||
| 5 | Md Radzi M. K. F., Sulong, A. B., Muhamad, N., Mohd Latiff, M. A., and Ismail, N. F. | Effect of Filler Loading and NaOH Addition on Mechanical Properties of Moulded Kenaf Polypropylene Composite | Pertanika Journal Tropical Agricultural Science | 583-590 | 2015 | 1 | – | Tiada | ||
| 6 | Ismail, N. F., Sulong, A. B.*, Muhamad, N., Tholibon, D., MdRadzi, M. K. F. Wan Ibrahim, W. A. S. | Review of the Compression Moulding of Natural Fiber Reinforced Thermoset Composites Material Processing and Characterisations | Pertanika Journal of Science and Technology | 533-547 | 2015 | 1 | – | Tiada | ||
| 7 | Rajabi J., Zakaria H., Muhamad N., Sulong A.B., Fayyaz A. | Fabrication of miniature parts using nano-sized powders and an environmentally friendly binder through micro powder injection molding | Microsystem Technologies | 1131-1136 | 2015 | 1 | 1 | 1 | 0.952 | Q3 |
| 8 | W.M.F Wan Mahmood, J.A. Ghani, N. Saibani, Z. Harun, A.B. Sulong, M.J. Ghazali, M.R.A. Mansor, S. Abdullah | Performance of undergraduate students in conducting research in two engineering programmes | Journal of Engineering Science and Technology | 52-60 | 2015 | 1 | 1 | – | Tiada | |
| 9 | S.A. Muhammed Ali, Ros Emilia Rosli, Andanastuti Muchtar, Abu Bakar Sulong, Mahendra Rao Somalu, Edy Herianto Majlan | Effect of sintering temperature on surface morphology and electrical properties of samarium-doped ceria carbonate for solid oxide fuel cells | Ceramics International | 1323-1332 | 2015 | 1 | 1 | 1 | 2.086 | Q1 |
| 10 | Muhammad Rafi Raza, Abu Bakar Sulong, Norhamidi Muhamad, Majid Niaz Akhtar, Javad Rajabi | Effects of binder system and processing parameters on formability of porous Ti/HA composite through powder injection molding | Materials and Design | 386-392 | 2015 | 1 | 1 | – | Tiada | |
| 11 | Wong Yee Ning, Norhamidi Muhamad, Abu Bakar Sulong, Abdolali Fayyaz, Muhammad Rafi Raza | Effects of Vanadium Carbide on Sintered WC-10%Co Produced by Micro-powder Injection Molding | Sains Malaysiana | 1175-1181 | 2015 | 1 | 1 | 0.48 | Q3 | |
| 12 | Tayser Sumer Gaaz, Abu Bakar Sulong , Majid Niaz Akhtar , Abdul Amir H. Kadhum, Abu Bakar Mohamad and Ahmed A. Al Amiery | Properties and applications of polyvinyl alcohol, halloysite nanotubes and their nanocomposites | Molecules | 22833-22847 | 2015 | 1 | 1 | 1 | 2.095 | Q3 |
| 13 | Fayyaz A., Muhamad N., Sulong A.B., Yunn H.S., Amin S.Y.M., Rajabi J. | Micro-powder injection molding of cemented tungsten carbide: Feedstock preparation and properties | Ceramics International | 3605-3612 | 2015 | 1 | 1 | 1 | 2.086 | Q1 |
| 14 | Eshkoor R.A., Ude A.U., Sulong A.B., Zulkifli R., Ariffin A.K., Azhari C.H. | Energy absorption and load carrying capability of woven natural silk epoxy – Triggered composite tubes | Composites Part B: Engineering | Oct-18 | 2015 | 1 | 1 | 2.602 | Q1 | |
| 15 | Nizaroyani Saibani,Muhammad Idham Sabtu,Zambri Harun, Wan Mohamad Faizal Wan Mahmood,Norhamidi Muhamad dan Jaafar Sahari | Comparison of emotional intelligence scores among engineering students of an academic programme | Journal of Engineering Science and Technology | 41-51 | 2015 | 1 | – | Tiada | ||
| 16 | Mohd Nizam Ab Rahman, Mahmood Doroodian, Yusniza Kamarulzaman, Norhamidi Muhamad | Designing and Validating a Model for Measuring Sustainability of Overall Innovation Capability of Small and Medium-sized Enterprises | Sustainability | 537-562 | 2015 | 1 | 1 | 1 | 1.077 | Q3 |
| 17 | Muhammad Rafi Raza, Abu Bakar Sulong, Norhamidi Muhamad, Majid Niaz Akhtar, Javad Rajabi | Effects of binder system and processing parameters on formability of porous Ti/HA composite through powder injection molding | Materials and Design | 386-392 | 2015 | 1 | 1 | – | Tiada | |