Universiti Kebangsaan Malaysia


Associate Professor Dr Rozli Zulkifli

  B.Eng(Hons), MSc, PhD

Department of Mechanical & Materials Engineering
Faculty of Engineering and Built Environment
Universiti Kebangsaan Malaysia
43600 Bangi Selangor
Malaysia

 

PUBLICATIONS

(International Journal: 51, National Journal: 6, International Conferences: 47, National Conferences: 7, Internal Conferences: 15, Book Chapters: 4, Technical Report: 1, PhD Thesis: 1, Masters Thesis: 1, Total: 133)

Journal

International Journal

1.       Md. Ayub, Mohd Jailani Mohd Nor, Mohammad Hosseini Fouladi, Rozli Zulkifli and Nowshad Amin. 2012. A Practical Acoustical Absorption Analysis of Coir Fibre Based on Rigid Frame Modeling, Acoustical Physics, Vol. 58(2), pp. 246-255. (ISI Index)

2.       Muhammad Nubli Zulkifli, Azman Jalar, Shahrum Abdullah, Roslinda Shamsudin, Rozli Zulkifli. 2012, Hardness Variation of Ball Bond Wire Bonding, Advanced Materials Research, Vols. 399 – 401, pp. 1048-1051. (ISI Index)

3.       M. Ayub, R. Zulkifli, M.H. Fouladi, N. Amin and M.J.M. Nor. 2011. A Study on the Acoustical Absorption Behavior of Coir Fibre Using Miki Model, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 6(3), pp. 343-349. (Scopus Index)

4.       Mussa, M.A., Abdullah, S., Nor Azwadi, C.S. and Zulkifli, R. 2011. Lattice Boltzmann Simulation of Cavity Flows at Various Reynolds Numbers, International Review on Modelling and Simulations, Vol. 4(4), pp. 1909-1919. (Scopus Index)

5.      Rozli Zulkifli, Mohd Faizal Mat Tahir, Mohd Jailani Mohd Nor dan Ahmad Rasdan Ismail, Pekali Penyerapan Bunyi dan Indek Kehilangan Penghantaran Panel Penyerap Bunyi Menggunakan Gentian Sabut Kelapa, The Journal of Technology (UTM), 54, Januari 2011: 13–24. (Scopus Index)

6.      Ahmad Rasdan Ismail, Norfadzilah Jusoh, Mohd. Nizam Ab. Rahman, Rozli Zulkifli and Kumaran Kardigama, 2011. Thermal Comfort Assessment at Parcel and Logistic Industry: A Field Study in Malaysia, The Journal of Institution of Engineers Malaysia (IEM), Vol. 72(3), pp.36-40.

7.       Zulkarnain, Rozli Zulkifli dan Mohd Jailani Mohd Nor. 2011. Kesan Lapisan Berliang dan Keliangan Plat Berlubang Terhadap Ciri Akustik Gentian Sabut Kelapa Sebagai Bahan Penyerap Bunyi (Effect of Porous Layer Backing and Perforation Ratio of Perforated Plate on Acoustic Characteristics of Coconut Fiber as a Sound Absorbent), Sains Malaysiana, Vol 40(6), pp. 623-629. (ISI Index)

8.       Rozli Zulkifli, Zulkarnain, Mohd Jailani Mohd Nor, Shahrum Abdullah. 2011. Perforated Plate Backing With Coconut Fiber as Sound Absorber For Low and Mid Range Frequencies, Key Engineering Materials Vols. 462-463 (2011) pp. 1284-1289. (ISI Index)

9.       R. Zulkifli and C.H. Azhari. 2011. Effect of silane concentrations on Mode I interlaminar fracture of woven silk/epoxy composites, Advanced Materials Research, 150-151, pp. 1171-1175. (ISI Index) 

10.   Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah & Mohd Sobri Takriff. 2010. Analysis of pulse air jet flow profiles, International Review of Mechanical Engineering 4(5): 495-501. (Scopus index)

11.   Rozli Zulkifli, Zulkarnain and Mohd Jailani Mohd Nor. 2010. Noise absorption properties of coir fiber with porous layer facing, International Review of Mechanical Engineering 4(4): 405-409. (Scopus index)

12.   R. Zulkifli & C.H. Azhari. 2010. Interfacial Treatment of Multi-Layer Woven Silk/Epoxy Composites, International Review of Mechanical Engineering, Vol. 4(1), pp.1-6. (Scopus index)

13.   Rozli Zulkifli, Zulkarnain and Mohd Jailani Mohd Nor. 2010. Noise Control Using Coconut Coir Fiber Sound Absorber with Porous Layer Backing and Perforated Panel, American Journal of Applied Sciences, Vol. 7(2), pp. 260-264. (Scopus index)

14.   Rozli Zulkifli and Che Husna Azhari. 2010. Interfacial Treatment of Multi-Layer Woven Silk Reinforced Epoxy Composites, Advanced Materials Research, Vols. 97-101, pp 1697-1700. (ISI index)

15.   Mohd Jailani Mohd Nor, Md. Ayub, Rozli Zulkifli, Nowshad Amin and Mohammad Hosseini Fouladi. 2010. Effect of Compression on the Acoustic Absorption of Coir Fiber, American Journal of Applied Sciences, Vol. 7(9), pp. 1285-1290. (Scopus index)

16.   Mohd Jailani Mohd Nor, Md. Ayub, Rozli Zulkifli, Nowshad Amin and Mohammad Hosseini Fouladi. 2010. Effect of Different Factors on the Acoustic Absorption of Coir Fiber, Journal of Applied Sciences, Vol. 10(22): pp. 2887-2892. (Scopus index)

17.   Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah and Mohd Sobri Takriff. 2009. Correlations Between Local Nusselt Number And Reynolds Number For Steady And Pulsating Circular Jet, International Journal of Engineering and Technology, Vol. 6, No. 1, pp. 9-20.

18.   R. Zulkifli, K. Sopian, S. Abdullah, M. S. Takriff. 2009. Correlations of Percentage Increases in Local Nusselt Number with Radial Distance for Steady and Pulsating Jet, International Review of Mechanical Engineering, Vol. 3 (5), pp. 613-618. (Scopus index)

19.   Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah and Mohd Sobri Takriff. 2009. Comparison of Local Nusselt Number between Steady and Pulsating Jet at Different Jet Reynolds Number, WSEAS Transactions on Environment and Development, Vol. 5 (5), pp. 384-393 (Scopus Index).

20.   A.R. Ismail, N. Jusoh, R. Zulkifli, K. Sopian and B.M. Deros. 2009. Thermal Comfort Assessment: A Case Study at Malaysian Automotive Industry, American Journal of Applied Sciences, 6(8):1495-1501. (ISI Index)

21.   Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah and Mohd Sobri Takriff. 2009. Experimental Study of Flow Structures of Circular Pulsating Hot Air Jet, American Journal of Engineering and Applied Sciences, Vol. 2(1): 171-175.

22.    Rozli Zulkifli, M.J.M. Nor, A.R. Ismail, M.Z. Nuawi, S. Abdullah, M.F.M. Tahir and M.N.A. Rahman, Comparison of acoustic properties between coir fibre and oil palm fibre, European Journal of Scientific Research, 2009. Vol. 33 (1): 144-152. (Scopus Index)

23.    Rozli Zulkifli, Mohd Jailani Mohd Nor, Ahmad Rasdan Ismail, Mohd Zaki Nuawi and Mohd Faizal Mat Tahir. Effect of Perforated Size and Air Gap Thickness on Acoustic Properties of Coir Fibre Sound Absorption Panels. European Journal of Scientific Research, 2009. Vol. 28(2), pp: 242-252. (Scopus Index)

24.    Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah and Mohd Sobri Takriff, “Comparison of Local Nusselt Number for Steady and Pulsating Circular Jet at Reynolds Number of 16000”, European Journal of Scientific Research, 2009, Vol.29(3): 369-378. (Scopus Index)

25.    Ismail A.R., Manap A.H.A.A., Wahab D.A., Zulkifli R., Makhtar N.K., Sopian K., Concurrent engineering approach in designing pressure vessel, European Journal of Scientific Research, 2009, 30(2):245-252. (Scopus Index)

26.    Ismail A.R., Hashim E., Ghani J.A., Zulkifli R., Kamilah N., Rahman M.N.A., Implementation of EIS: A study at Malaysian SMES, European Journal of Scientific Research, 2009, 30(2):215-223. (Scopus Index)

27.    A.R. Ismail, M.L. Yeo, M.H.M. Haniff, R. Zulkifli, B.M. Deros, N.K. Makhtar, Assessment of postural loading among the assembly operators: a case study at Malaysian automotive industry, European Journal of Scientific Research, 2009, Vol. 30, No. 2. (Scopus Index)

28.    A. R. Ismail, Y. C. Soon, S. Abdullah, R. Zulkifli, K. Sopian, M.N.A. Rahman, Reverse Engineering in Fabrication of Piston Crown, European Journal of Scientific Research, 2009, 29(1):136-146. (Scopus Index)

29.    A.R. Ismail, R. Ismail, R. Zulkifli, N. K. Makhtar, B. M. Deros, A Study on Implementation of Preventive Maintenance Programme at Malaysia Palm Oil Mill, European Journal of Scientific Research, 2009, 29(1):126-135. (Scopus Index)

30.    A. R. Ismail. N. Jusoh, K. Sopian, I.M.S. Usman, R. Zulkifli, M.N.A. Rahman, “Thermal Comfort Assessment: A Study at Malaysia Car Manufacturer”, European Journal of Scientific Research, 2009, Vol. 27(4):510-523. (Scopus Index)

31.    Rozli Zulkifli, Che Husna Azhari, Maryam J. Ghazali, Ahmad Rasdan Ismail and Abu bakar Sulong. Interlaminar Fracture Toughness of Multi-Layer Woven Silk/Epoxy Composites Treated with Coupling Agent. European Journal of Scientific Research, 2009. Vol. 27(3): 454-462. (Scopus Index)

32.    Omar N., Zulkifli R., Hassan R., “Development of a virtual laboratory for radiation heat transfer”, European Journal of Scientific Research, 2009, 32(4):562-571. (Scopus Index)

33.    Abdullah, S., Fahruddin, A., Syarif, J., Omar, M.Z., Zulkifli, R., Fatigue crack growth modelling of Fibre metal laminate (FML) composite, European Journal of Scientific Research, 2009, 35(1): 43-53. (Scopus Index)

34.   Rozli Zulkifli, M.J. Mohd Nor, M.F. Mat Tahir, A.R. Ismail and Mohd Zaki Nuawi, “Acoustic Properties of Multi-Layer Coir Fibres Sound Absorption Panel”, Journal of Applied Sciences, 2008, Vol. 8(20), pp. 3709-3714. (Scopus Index)

35.   Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah And Mohd Sobri Takriff, 2008. Effect of Pulsating Circular Hot Air Jet Frequencies on Local and Average Nusselt Number, American Journal of Engineering and Applied Sciences 1(1): 58-62.

36.   A.R.Ismail, M.R.A.Mansor, M.J.M.Nor, M.Z.Nuawi, R. Zulkifli, M.N.Ab.Rahman & K.Sopian. 2008, Comparative Studies and Impact Analysis of Environmental Noise Modeling from Malaysian Industrial Projects, WSEAS Transactions on Environment and Development, 4(8): 666-675. (Scopus Index)

37.   M.Z. Nuawi, S. Abdullah, A.R. Ismail, R. Zulkifli, M.k. Zakaria and M.F.H. Hussin, “A Study on Ultrasonic Signals Processing Generated From Automobile Engine Block Using Statistical Analysis”, WSEAS Transactions on Signal Processing, 2008, Vol. 4(5), pp. 279-288. (Scopus Index)

38.   Rozli Zulkifli, Koh Su Pei and Che Husna Azhari, “Interlaminar Fracture Properties of Multi-Layer Woven Silk Fibre/Polyester Composites”, Asian Journal of Applied Sciences, 2008, Vol. 1, Issue 2, pp. 177-184.

39.   R. Zulkifli, C.H. Azhari, K.S. Pei and U. Thanapel, "Mechanical Properties of Silk Fibre Reinforced Polymer", Indonesian NanoLetter, 2008, Vol. 2(3), pp. 73-85.

40.   S. Ataollahi, C.H. Azhari, S.T. Taher, A.A. Oshkour, A.K. Ariffin and R. Zulkifli, “Collapse Modes of Square Tube Silk/Epoxy Composite Under Quasi-Static Load”, Indonesian NanoLetter, 2008, Vol. 2(3), pp. 1-4.

41.   Rozli Zulkifli and Kamaruzzaman Sopian, “Studies on Pulse Jet Impingement Heat Transfer: Flow Profile and Effect of Pulse Frequencies on Heat Transfer”, International Journal of Engineering and Technology, 2007, Vol. 4(1): 86-94.

42.   Kamaruzzaman Sopian, Sulaiman Shaari, Nowshad Amin, Rozli Zulkifli, and Mohd Nizam Abdul Rahman, “Performance of a Grid-connected Photovoltaic System in Malaysia”, International Journal of Engineering and Technology, 2007, Vol. 4, No.1, pp. 57-65.

43.   Mohd Nizam Ab Rahman, Baba Md Deros, Rozli Zuklifli, Ahmad Rasdan Ismail,  ISI, A Practical tool for quality performance improvement , The Journal of Institution of Engineers Malaysia (IEM), 2007, Vol. 68(3), pp.56-64.

44.   Rozli Zulkifli and Kamaruzzaman Sopian, “Pulsating Jet Impingement Heat Transfer”, The Journal of Institution of Engineers Malaysia (IEM), 2006, Vol. 67(3), pp.47-53.

45.   R. Zulkifli, L.K. Fatt, C.H. Azhari and J. Sahari, “Interlaminar Fracture Properties of Fibre Reinforced Natural Rubber/Polypropylene Composites”, Journal of Materials Processing Technology, (Elsevier) 2002, Vol. 128, pp. 33-37. (ISI Index)

46.   K. Sopian, R. Zulkifli, J. Sahari and M.Y. Othman, “Thermal Performance of Thermoplastic Natural Rubber Solar Collector”, Journal of Materials Processing Technology, (Elsevier) 2002, Vol. 123, pp. 179-184. (ISI Index)

47.   K. Kim, M. L Sham, H. Hamada, Y. Hirai, K. Fujihara, H. Saidpour, M. Sezen, Y.J. Dong, H.S. Yang, Y.L. Bai and T.X. Mao, C. Bathias, S.V. Hoa, A. Boutella, A.D. Ngo, P. Krawczak, R. Bequignat, J. Pabiot, S. Pinter, G. Banhegyi, L.T. Drzal, H. Ho, C.Y. Yue, K. Padmanabhan, Y. Suzuki, K. Schulte, J. K. Karger-Kocsis, W.J. Cantwell, R. Zulkifli, L. Ye, J.J. Lesko, K. Garcia, “Effect of Surface Treatment on Mode I Interlaminar Fracture Behaviour of Plain Glass Woven Fabric Composites: Part I. Report of the 2nd Round- Robin Test Results”, Composite Interfaces, 2001, Vol. 7, No.3, pp 227-242.

48.   Awaluddin Thayab, Che Husna Azhari dan Rozli Zulkifli, “Pemprosesan dan Perilaku Impak Komposit Propilena/Polietilena Ketumpatan Tinggi Kitar Semula Terteulang Gentian dan Zarah Kaca-E”, Jurnal Teknik Mesin USU, 2000, Vol. 3, No. 2, pp. 93-100.

49.   R. Zulkifli, W.J. Cantwell and M. Blyton “Mode II Interlaminar Failure Mechanisms in Carbon Fibre / PEEK and Carbon Fibre / Epoxy Composites”, Journal of Engineering (UKM), 1999, Vol. 11 (1).

50.   R.Zulkifli, "Interlaminar Fracture Toughness Analysis of Thermoplastic Composites Treated with Silane Coupling Agent", Jurnal Teknik Mesin USU, 1998, Vol. 2, No. 1, pp.1-8.

51.   W.J. Cantwell and R. Zulkifli, “An Investigation into Mode II Failure Mechanisms in Carbon Fibre Reinforced PEEK”, Journal of Materials Science Letters, 1997, Volume 16, Issue 7, pp 0509-0511. (ISI Index).

 

National Journal

  1. M.J. Ghazali, S. Abdullah, R. Zulkifli, “The Characterisation of MML of Aluminium Alloys Induced Wear against Alumina”, Malaysian Journal of Microscopy, 2007, Vol 3, pp. 174-180.
  2. Kamaruzzaman Sopian, Rozli Zulkifli and Lee Kiok Yung, “Thermal Conductivity of Thermoplastic Natural Rubber (TPNR) Composite Filled With Stainless Steel Particle”, The Journal of Technology, Series A, UTM, Vol. 45(A), Dec 2006.
  3. Rozli Zulkifli and Zulkhairi Zainol Abidin, “Effects of Surface Adhesion on Fracture Properties of Glass Fibres/VinylEster Composites”, Journal of Solid State Science and Technology Letters, Vol. 12, No. 1, Dec 2005, pp.101.
  4. Rozli Zulkifli, Kamaruzzaman Sopian and Lee Kiok Yung, "Thermal Conductivity Measurement of TPNR Composites with Rapid Thermal Conductivity Apparatus", Journal of Solid State Science and Technology Letters, Vol. 12, No. 1, Dec 2005, pp.153.
  5. Che Husna Azhari, A. Thayab and R. Zulkifli, “Mechanical Property-Morphology Relationship of E-Glass Reinforced recycled Thermoplastic Filled Composites”, Journal of Technology (UTM), Series A, Advanced Materials, Energy and Transport, 2000, Vol. 33(A), pp. 1-8.
  6. Rozli Zulkifli, Lee Kai Fatt, Che Husna Azhari and Jaafar Sahari, “Interlaminar Fracture Properties of Fibre Reinforced Thermoplastic/Natural Rubber Composites”, Journal Technology and Industry, 1998, No.8, pp.30-37.

 

Conferences

International Conferences

 

  1. Rozli Zulkifli, Ali Ahmed Gitan, Kamaruzzaman Sopian, Shahrir Abdullah. Development of Multiple Pulsating Jets Mechanism for Jet Impingement Heat Transfer. Regional Conference on Automotive Research (ReCAR2011), 14-15 Dec 2011, Royale Bintang, Kuala Lumpur. P096.
  2. Rozli Zulkifli, Teo Kok Thye, Mohd Faizal Mat Tahir, Ahmad Rasdan Ismail and Mohd Jailani Mohd Nor. 2011. Automotive Noise Insulation Composite Panel using Natural Fibres with different Perforation Areas, Regional Conference on Automotive Research (ReCAR2011), 14-15 Dec 2011, Royale Bintang, Kuala Lumpur. P025.
  3. Md. Ayub, Mohammad Hosseini Fouladi, Rozli Zulkifli, Nowshad Amin and Mohd Jailani Mohd Nor. Effect of Porosity on the use of Multiple Perforated Plates with Coir Fiber Acoustic Absorber, 18th International Congress on Sound & Vibration (ICSV18), Rio de Janeiro, Brazil, 10 to 14 July 2011.
  4. B. Daryakenari, S. Abdullah, F.Y. Lim, R. Zulkifli & E. Sundararajan, 2010, “Effect of angular rear bumper on the reduction of drag coefficient on ahmed body“, International Conference on Sustainable Mobility (ICSM 2010), Kuala Lumpur, Malaysia.
  5. Md. Ayub, Mohd Jailani Mohd Nor, Nowshad Amin, Rozli Zulkifli and Mohammad Hosseini Fouladi, A Study on the Acoustical Absorption Performance of Coir Fiber in Composed with Multiple Perforated Plate and Air Gap, 17th International Congress on Sound & Vibration (ICSV17), 18-22 July 2010, Cairo, Egypt.
  6. Rozli Zulkifli, Zulkarnain, Mohd Jailani Mohd Nor, Shahrum Abdullah, Perforated Plate Backing With Coconut Fiber As Sound Absober For Low and Mid Frequencies “Book of Abstract 2010”, 8th International Conference on Fracture and Strength of Solids (FEOFS2010), Kuala Lumpur, Malaysia, 7-9th June 2010, ISBN: 978-983-44698-1-8, ©2010 MACM 
  7. Zulkarnain, Rozli Zulkifli, Mohd Jailani Mohd Nor, Experimental Study Effect of Perforation Ratio and Hole Diameter Of Perforated Plate Backing With Coconut Fiber, 3rd Regional Conference on Noise, Vibration and Comfort (NVC 2010), 28-30th June, 2010, Putrajaya, Malaysia, pp. 284-291
  8. M. Ayub, M. J. M. Nor, N. Amin, R. Zulkifli, A. Arifin, Development of an Automated Acoustic Absorber Panel Using Coir Fiber, 3rd Regional Conference on Noise, Vibration and Comfort (NVC 2010), 28-30th June, 2010, Putrajaya, Malaysia, pp. 292-300
  9. M. Ayub, M. J. M. Nor, N. Amin, M. Hosseini Fouladi, R. Zulkifli, Analytical Modeling Technique For The Prediction Of Coir Fiber Acoustical Behaviour, 3rd Regional Conference on Noise, Vibration and Comfort (NVC 2010), 28-30th June, 2010, Putrajaya, Malaysia, pp. 301-309
  10. A. R. Ismail, M. J. M. Nor, M. F. M. Tahir, H. Mohamad, R. A. Bakar, R. Zulkifli, Environmental Noise Impact to Urban Area In Malaysia: A Case Study Due to Aircraft Noise,  3rd Regional Conference on Noise, Vibration and Comfort (NVC 2010), 28-30th June, 2010, Putrajaya, Malaysia, pp. 443-451
  11. Md. Ayub, Mohd Jailani Mohd Nor, Nowshad Amin, Rozli Zulkifli, Mohammad Hosseini Fouladi, Analysis on Sound Absorption of Natural Coir Fiber Using Delany-Bazley Method, Proceedings of the International Conference on Mechanical Engineering 2009 (ICME2009) 26- 28th December 2009, Dhaka, Bangladesh, ICME09-ABS-016.
  12. Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah and Mohd Sobri Takriff, “Flow Structures of Circular Air Jet at Steady and Different Pulsating Frequency”, Proceeding International Engineering Convention (INTEC 2009), 11-14th May 2009, Damascus, Syria, pp. 114-121.
  13. Rozli Zulkifli, Kamaruzzaman Sopian, Shahrir Abdullah and Mohd Sobri Takriff, “Correlations Between Local Nusselt Number and Reynolds Number for Steady and Pulsating Circular Jet”, Proceeding International Engineering Convention (INTEC 2009), 11-14th May 2009, Damascus, Syria, pp. 427-438.
  14. Rozli Zulkifli, Che Husna Azhari, Maryam J. Ghazali and Abu Bakar Sulong, “Tearing Strength of Woven Silk Fibre/Polyester Composites”, Proceeding International Engineering Convention (INTEC 2009), 11-14 May 2009, Damascus, Syria, pp. 122-128.
  15. Nazlia Omar, Rozli Zulkifli and Rosilah Hassan, “A Web-Based Virtual Laboratory for Heat Transfer”, International Engineering Education Conference, Madinah, Kingdom of Saudi Arabia, 16-19 May 2009, pp. 148-157
  16. Nazlia Omar, Mohd Faizal Ismail, Rozli Zulkifli and Rosilah Hassan, “A Low-Cost Real-Time Temperature and Voltage Monitoring System”, Proceeding International Engineering Convention (INTEC 2009), 11-13 May 2009, Damascus, Syria, pp. 179-187.
  17. Rozli Zulkifli, C.H. Azhari, K.S. Pei and Uthayakumar, “Fracture Properties of Silk Fibre Reinforced Polymer”, 100 Nanotechnology Doctor Conference and 2nd Advanced Materials Research Group, 27-28 October 2008, Serpong, Indonesia.
  18. A.R. Ismail, M. Radzi A.M., M.J.M. Nor, M.Z. Nuawi, R. Zulkifli, K. Sopian, 2008, Noise Modeling Scenario from Industrial Projects in Malaysia, The Proceedings of International Conference on Energy, Environment, Ecosystems And Sustainable Development (EEESD'08), World Scientific And Engineering Academy And Society (WSEAS) International Conference 2008, 11-13 June 2008, Algarve, Portugal. ISBN: 978-960-6766-73-2 ISSN: 1790-5095.     
  19. A. R. Ismail, M. R. A. Rani, Z. K. M. Makhbul, J.A. Ghani, M. Tahir and R. Zulkifli, 2008, Optimum Solution of Environmental Factors Towards Productivity Improvement Using Taguchi Method, The Proceedings of International Conference on Energy, Environment, Ecosystems And Sustainable Development (EEESD'08),World Scientific And Engineering Academy And Society (WSEAS) International Conference 2008, 11-13 June 2008, Algarve, Portugal. ISBN: 978-960-6766-73-2 ISSN: 1790-5095.
  20. Zulkifli, R., Nor, M.J.M., Mat Tahir, F. and Ismail, A.R., “Acoustic Properties of Sound Absorption Panels Using Multi-Layer Coir Fibres”, Proc. 13th International Conference on Applied Mechanics and Mechanical Engineering, 27-29 May 2008, Cairo, Egypt, pp. 92-98.
  21. Zulkifli, R., Uchenna, A.U., Pei, K.S. and Azhari, C.H., “Interlaminar Fracture Toughness Of Multi-Layer Woven Silk Fibre/Polyester Composites”, Proc. 13th International Conference on Applied Mechanics and Mechanical Engineering, 27-29 May 2008, Cairo, Egypt, pp. 154-162.
  22. Mohd Nizam Ab Rahman, Kamaruzzaman Sopian, Ruhizan Mohd Yasin, Juhari Ab Razak, Rozli Zulkifli & Ahmad Rasdan Ismail, “Renewable Energy System in Remote Area and Suggestions for Effective Implementation”, World Renewable Energy Congress (WRECX), pp. 2034-2038.
  23. A.R. Ismail, M. Radzi A.M., M.J.M.Nor, M.Z.Nuawi, R. Zulkifli, K.Sopian, 2008, “Noise Modeling Scenario from Industrial Projects in Malaysia”, Proceedings of Energy, Environment, Ecosystems And Sustainable Development (EEESD'08) , World Scientific And Engineering Academy And Society (WSEAS) International Conference 2008, 11-13th  June 2008, Algarve, Portugal. ISBN: 978-960-6766-73-2 ISSN: 1790-5095. Pp. 374-379.
  24. A. R. Ismail, M. R. A. Rani, Z. K. M. Makhbul, J.A.Ghani, M.Tahir and R.Zulkifli, 2008, “Optimum Solution of Environmental Factors Towards Productivity Improvement Using Taguchi Method”, Proceedings of Energy, Environment, Ecosystems And Sustainable Development (EEESD'08) , World Scientific And Engineering Academy And Society (WSEAS) International Conference 2008, 11-13 June 2008, Algarve, Portugal. ISBN: 978-960-6766-73-2 ISSN: 1790-5095. Pp. 347-352.
  25. A.R. Ismail,  M.R.A. Rani, Z.K.M. Makhbul, B.M. Deros, M.J.M. Nor And R. Zulkifli, 2007, “The Effect Of Environmental Factors On The Workers Performance: A Study At Malaysia Electronics Industry”, The Proceeding of the 25th Conference of the Asean Federation Of Engineering Organizations.
  26. Tjukup Marnoto, Wan Ramli Wan Daud, Kamaruzzaman Sopian, Rozli Zulkifli, Mohd Nizam Ab Rahman, M. AlGhou and Nowshad Amin, 2007, “PERFORMANCE OF A GRID CONNECTED SOLAR HYDROGEN PV SYSTEM IN MALAYSIA”, Proceeding 17th International Photovoltaic Science and Engineering Conference – PVSEC-17, 3-7 December 2007, Fukuoka, Japan, pp. 669-670.
  27. Tjukup Marnoto, Wan Ramli Wan Daud, Kamaruzzaman Sopian, Mohd Nizam Ab Rahman, Rozli Zulkifli, M. AlGhoul and Nowshad Amin , 2007,  “Economic Analysis Of A Grid Connected Solar Hydrogen Pv System”, 17th International Photovoltaic Science and Engineering Conference - PVSEC-17, pp. 909-910.
  28. Mohd Jailani Mohd Nor, Rozli Zulkifli, Mohd Faizal Mat Tahir and Ahmad Rasdan Ismail , 2007, “Comparison of Acoustic Properties Between Coconut Coir Fibre and Oil Palm Fibre”, Proceedings on Regional Conference on Advances in Noise, Vibration and Comfort (NVC2007), 27-28 Nov 2007, Putrajaya, pp. 224-230.
  29. Mohd Jailani Mohd Nor, Rozli Zulkifli, Mohd Faizal Mat Tahir and Ahmad Rasdan Ismail , 2007, “Innovative Acoustic Absorption Panel Design using Natural Fibre”, Proceedings on Regional Conference on Advances in Noise, Vibration and Comfort (NVC2007), 27-28 Nov 2007, Putrajaya, pp. 253-260.
  30. R. Zulkifli and K. Sopian, “Studies On Pulse Jet Impingement Heat Transfer: Flow Profile And Effect Of Pulse Frequencies On Heat Transfer”, Proceedings 2nd International Engineering Convention 2007: Globalisation in Growing Economies – Building Capacity, 10 – 14 March 2007, Jeddah, Saudi Arabia, pp.629-637.
  31. Kamaruzzaman Sopian, Sulaiman Shaari, Rozli Zulkifli and Mohd Nizam Abdul Rahman “Performance Of A Grid-Connected Photovoltaic System In Malaysia”, Proceedings 2nd International Engineering Convention 2007: Globalisation in Growing Economies – Building Capacity, 10 – 14 March 2007, Jeddah, Saudi Arabia, pp.802-810.
  32. Rozli Zulkifli and K. Sopian, “Jet Impingement Heat Transfer: Part 1. Study of Flow Structures of Circular Pulsating Hot Air Jet”, Proceedings of the Eleventh Asian Congress of Fluid Mechanics, 22-25 May 2006, Kuala Lumpur, Malaysia, pp.520-525.
  33. Rozli Zulkifli and K. Sopian, “Jet Impingement Heat Transfer: Part 2. Effect of Pulsating Frequencies on Local and Average Heat Transfer Coefficient”, Proceedings of the Eleventh Asian Congress of Fluid Mechanics, 22-25 May 2006, Kuala Lumpur, Malaysia, pp.526-530.
  34. Rozli Zulkifli, K. Sopian, M.H. Ruslan and M.Y. Othman, 2005, “Modified Heat Transfer Correlations for the V-Groove Solar Collector”, Proceeding The 5th 21st Century COE International Symposium on Global Renaissance by Green Energy Revolution, USM & Univ. of Nagoya, Japan, pp.76, 7-9 August 2005, ParkRoyal Hotel, Ferringhi Beach, Penang, Malaysia.
  35. Rozli Zulkifli, Kamaruzzaman Sopian and Lee Kiok Yung, 2005, “Thermal Conductivity of TPNR Composites Filled with Carbon Black and Stainless Steel Particle”, Proceeding The 7th 21st Century COE International Symposium on Creation of Hybridized Materials with Super-Functions, USM & Univ. of Nagoya, Japan, pp.77, 7-9 August 2005, ParkRoyal Hotel, Ferringhi Beach, Penang, Malaysia.
  36. Rozli Zulkifli, Che Husna Azhari and Mohd Dali Isa, 2005, “Crack Tip Region Failure Mechanism in Woven Carbon Fibre/PEEK under mode II Loading Conditions”, Proceeding The 7th 21st Century COE International Symposium on Creation of Hybridized Materials with Super-Functions, USM & Univ. of Nagoya, Japan, pp.29, 7-9 August 2005, ParkRoyal Hotel, Ferringhi Beach, Penang, Malaysia.
  37. Rozli Zulkifli, Kamaruzzaman Sopian and Lee Kiok Yung, 2005, “Thermal Conductivity of TPNR Composites Filled with Carbon Black and Stainless Steel Particle”, Proceeding The 7th 21st Century COE International Symposium on Creation of Hybridized Materials with Super-Functions, USM & Univ. of Nagoya, Japan, pp.30, 7-9 August 2005, ParkRoyal Hotel, Ferringhi Beach, Penang, Malaysia.
  38. R. Zulkifli, E. Benard, S. Raghunathan and A. Linton, “Effect of Pulse Jet Frequency on Impingement Heat Transfer”, AIAA Paper 2004-1343, 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, 5-8 January 2004.
  39. Rozli Zulkifli, N. Valliyappan David, Radhi Fahmi and Mohd Jailani Mohd Nor, 2000, “Ultrasonic Characterisation of Rubber Wood Reinforced Polyester: Effect of Fibre Diameter and Volume Fraction”, in: Daud et al. (editors), Proc. International Conference on Advanced Strategic Technologies (ICAST 2000), Volume 1, Putrajaya, Malaysia, 15-17 August 2000, pp. 771-780.
  40. Mohd Jailani Mohd Nor, N. Valliyappan David and Rozli Zulkifli, 2000, “Effect of Silane Coupling  Agent on the Tensile Properties of Oil Palm Frond Fibre/Polyester Composites”, in: Daud et al. (editors), Proc. International Conference on Advanced Strategic Technologies (ICAST 2000), Volume 1, Putrajaya, Malaysia, 15-17 August 2000, pp. 781-790.
  41. K. Sopian, R. Zulkifli, M. Z. Omar and A. Arifin, 2000, “A Study on the Mechanical and Thermal Properties of Carbon Black/Polymer Composites as a Solar Collector”, in: Daud et al. (editors), Proc. International Conference on Advanced Strategic Technologies (ICAST 2000), Volume 1, Putrajaya, Malaysia, 15-17 August 2000, pp. 791-800.
  42. A. Arifin, M. Z. Omar & R. Zulkifli, 2000, “Prediction Of Off-Axis Four-Point Bending Test Parameters In Measuring Interlaminar Shear Strength For Composite Laminates”, in: Daud et al. (editors), Proc. International Conference on Advanced Strategic Technologies (ICAST 2000), Volume 1, Putrajaya, Malaysia, 15-17 August 2000, pp. 667-676.
  43. Rozli Zulkifli, N.Valliyappan David and Mohd Jailani Mohd Nor, Characterization Of Natural Fibre Reinforced Polymer Composite Using Ultrasonic Method, Proc. World Engineering Congress (WEC 1999), pp.493-497, Kuala Lumpur, July 19-21, 1999.
  44. K. Sopian, M.Y. Othman, R. Zulkifli, A.S. A. Wahab, “Wind Energy Potential on Malaysian Resort Islands: A Case Study of Tioman”, Proc. World Renewable Energy Congress (WREC 1999), Kuala Lumpur, June 8–11,1999.
  45. H.Saidpour, M.Sezen, Y.J.Dong, H.S.Yang, Y.L.Bai, T.X.Mao, C.Bathias, P.Krawczak, R.Bequignat, J.Pabiot, S.Pinter, G.Banhegyi, J.K.Kim, M.L.Sham, I.Verpoest, H.Hamada, Y.Hirai, Kazutoshi FUJIHARA, C.Y.Yue, K.Padmanabhan, Y.Suzuki, K.Schlute, J.Karger-Kocsis, W.J.Cantwell, R.Zulkifli, L.Ye, A.Lowe, S.V.Hoa, V.V.Smirnov, L.T.Drzal, W.R. Broughnton, J.J.Lesko & T.Tanimoto, "Effects of Surface Treatment on Mode I Interlaminar Fracture Behavior of Plain Glass Woven Fabric Composites: Report of a Round Robin Test I", In Proc. 11th International Conf. on Composite Materials (ICCM-11), July 1997, Gold Coast, Australia, pp.798-807.
  46. H.Saidpour, M.Sezen, Y.J.Dong, H.S.Yang, Y.L.Bai, T.X.Mao, C.Bathias, P.Krawczak, R.Bequignat, J.Pabiot, S.Pinter, G.Banhegyi, J.K.Kim, M.L.Sham, I.Verpoest, H.Hamada, Y.Hirai, Kazutoshi FUJIHARA, C.Y.Yue, K.Padmanabhan, Y.Suzuki, K.Schlute, J.Karger- Kocsis, W.J.Cantwell, R.Zulkifli, L.Ye, A.Lowe, S.V.Hoa, V.V.Smirnov, L.T.Drzal, W.R. Broughnton, J.J.Lesko & T.Tanimoto, "Effects of Weave Structure on Mode I Interlaminar Fracture Behavior of Plain Glass Woven Fabric Composites as a Function of the Interface: Report of a Round Robin Test II", In Proc. 11th International Conf. on Composite Materials (ICCM-11), July 1997, Gold Coast, Australia, pp.27-35.
  47. H.Saidpour, M.Sezen, Y.J.Dong, H.S.Yang, Y.L.Bai, T.X.Mao, C.Bathias, P.Krawczak, R.Bequignat, J.Pabiot, S.Pinter, G.Banhegyi, J.K.Kim, M.L.Sham, I.Verpoest, H.Hamada, Y.Hirai, Kazutoshi Fujihara, C.Y.Yue, K.Padmanabhan, Y.Suzuki, K.Schlute, J.Karger-Kocsis, W.J.Kantwell, R.Zulkifli, L.Ye, A.Lowe, S.V.Hoa, V.V.Smirnov, L.T.Drzal, W.R. Broughnton, J.J.Lesko & T.Tanimoto, "The Report of Round Robin Test by SIMS: Interlaminar Fracture Behavior on Glass Woven Fabric Reinforced Vinylester Composites", In Proceedings of Recent Advancement of Interfacial Materials Science on Composite Materials (SIMS VI), 7-9 May, 1997, Kansai University, Osaka, Japan, pp.313-320

 

National Conferences


  1. Nazlia Omar, Syahidah Sufi Haris, Rosilah Hassan, Haslina Arshad, Masura Rahmat, Noor Faridatul Ainon Zainal and Rozli Zulkifli, 2011. Automated Analysis of Exam Questions According To Bloom’s Taxonomy, Prosiding Kongress Pengajaran dan Pembelajaran UKM, 17-20 Dis 2011, Vistana Hotel, Penang.
  2. Rozli Zulkifli and Zulkhairi Zainol Abidin, 2005, Analysis of Surface Fracture of Glass Fibre Reinforced Polymer Composites, Proceeding 14th Scientific Conference of Electron Microscopy Society Malaysia, USM & EMSM, 5-7 December 2005, Vistana Hotel, Penang.
  3. Rozli Zulkifli and Khairul Izham, 2005, Analysis of Printed Circuit Board Scrap Particle as Filler Materials in Conducting Polymer Composites, Proceeding 14th Scientific Conference of Electron Microscopy Society Malaysia, USM & EMSM, 5-7 December 2005, Vistana Hotel, Penang.
  4. Rozli Zulkifli, Che Husna Azhari and Mohd Dali Isa, 2005, Fracture Analysis of Woven Carbon Fibre/PEEK under mode II Loading Conditions, Proceeding 14th Scientific Conference of Electron Microscopy Society Malaysia, USM & EMSM, 5-7 December 2005, Vistana Hotel, Penang.
  5. Che Husna Azhari, Awaluddin Thayab dan Rozli Zulkifli, “Mechanical Property-Morphology Relationship of E-Glass Reinforced Recycled Thermoplastic Filled Composites”, Malaysian Science & Technology Congress 2000, Symposium C, Gabungan Persatuan-Persatuan Sains dan Teknologi Malaysia, 7-9 Nov 2000.
  6. Awaluddin Thayab, Rozli Zulkifli dan Che Husna Azhari, “Pemprosesan dan Perilaku Impak Komposit Termoplastik Polipropilena/Polietilena Ketumpatan Tinggi Kitar Semula Bertetulang Gentian dan Zarah Kaca-E”, Kertas Seminar Bersama UKM/Universiti Brunei Darussalam (UBD), Brunei, 4 April 2000.
  7. Awaluddin Thayab, Che Husna Azhari dan Rozli Zulkifli, “Teknik Daur Ulang Sebagai Alternatif: Sifat Mekanik dan Morfologi”, Seminar Riset & Pengembangan Material Komposit (Fibreglass), Universiti Sumatera Utara, Medan, 27 Julai 2000.

 

Internal/Local Conferences

  1. Rozli Zulkifli, Khairul Izham Halil, Mohd Zaidi Omar, Ahmad Rasdan Ismail dan Mohd Nizam Ab Rahman, 2005, Analisis Bahan Sekerap Papan Litar Tercetak Sebagai Bahan Pengisi Dalam Komposit Polimer Pengaliran, Prosiding Penyelidikan Dan Pengembangan 2005, Jilid 1, No. 1, hlm.31-38.
  2. Kamaruzzaman Sopian, Rozli Zulkifli dan Lee Kiok Yung, 2005, Pengukuran Kekonduksian Haba Komposit Getah Asli Termoplastik Berpengisi Partikel Keluli Tahan Karat, Prosiding Penyelidikan Dan Pengembangan Jabatan Kej Mekanik & Bahan UKM 2005, hlm. 39-46.
  3. Mohd Shukri Abdullah, Rozli Zulkifli, Mohd Zaki Nuawi dan Firdaus Mohd Hamzah, 2005, Kajian Kesan Haba Terhadap Sifat Mekanik Polimer Komposit Bertetulang Gentian Asli, Prosiding Penyelidikan Dan Pengembangan Jabatan Kej Mekanik & Bahan UKM 2005, hlm. 53-60.
  4. Mohd Zaidi Omar, Mariyam Jameelah Ghazali, Shahrum Abdullah, Rozli Zulkifli dan Ahmad Rasdan Ismail, 2005, Interpretasi Lengkung Daya-Anjakan Yang Dihasilkan Melalui Ujian Mampatan, Prosiding Penyelidikan Dan Pengembangan Jabatan Kej Mekanik & Bahan UKM 2005, hlm. 69-76.
  5. Amri Zaini Sulaiman, Rozli Zulkifli, Mohd Jailani Mohd Nor dan Fadzlita Mohd Tamiri, 2005, Kajian Sifat Penyerapan Bunyi Menggunakan Gentian Asli Sabut Kelapa, Prosiding Penyelidikan Dan Pengembangan Jabatan Kej Mekanik & Bahan UKM 2005, hlm. 127-134.
  6. Mohd Zaki Nuawi, Firdaus Mohd Hamzah dan Rozli Zulkifli, 2005, Permodelan Siri Masa Isyarat Daya Pemesinan, Prosiding Penyelidikan Dan Pengembangan Jabatan Kej Mekanik & Bahan UKM 2005, hlm. 135-142.
  7. Md Nizam Ab Rahman, Baba Md Deros, Ahmad Rasdan Ismail dan Rozli Zulkifli, 2005, Kajian Pelaksanaan Pengurusan Kualiti Menyeluruh Dari Perspektif Pihak Pengurusan, Prosiding Penyelidikan Dan Pengembangan Jabatan Kej Mekanik & Bahan UKM 2005, hlm. 227-232.
  8. Ahmad Rasdan Ismail, Ehsannawan Hashim, Mohd Nizam Ab Rahman, Rozli Zulkifli dan Mohd Zaidi Omar, 2005, Kesan Pelaksanaan Sistem Inventori Yang Berkesan Kepada Pulangan Pelaburan: Kajian Kes Di Industri Kecil Dan Sederhana, Prosiding Penyelidikan Dan Pengembangan Jabatan Kej Mekanik & Bahan UKM 2005, hlm. 233-240.
  9. Awaluddin Thayab, Che Husna Azhari dan Rozli Zulkifli, “Pemanfaatan Teknologi Plastik Kitar Semula Dalam Pelestarian Sekitaran”, Simposium 30 Tahun UKM, PPS, Bangi, 17 Julai 2000.
  10. Awaluddin Thayab, Che Husna Azhari dan Rozli Zulkifli, 2001, “Struktur Adunan dan Morfologi Komposit Polipropilena/Polietilena Ketumpatan Tinggi Kitar Semula Tertetulang Kaca-E”, Pascasidang Penyelidikan & Pengembangan 2001, Jabatan Kejuruteraan Mekanik dan Bahan, m/s 184-189
  11. Mohd Jailani Mohd Nor, Rozli Zulkifli dan N. Valliyappan David, “Pencirian Bahan Komposit Polimer Bertetulang Gentian Asli Menggunakan Kaedah Ultrasonik”, Seminar IRPA-UKM 1999, Awana Resort, Genting Higlands, 30 Julai – 1 Ogos 1999, m/s 645-648.
  12. Mohd Jailani Mohd Nor, Rozli Zulkifli dan N. Valliyappan David, 1999. Pengecilan Bunyi dan Kaitannya Dengan Pecahan Isipadu Gentian Asli Menggunakan Kaedah Tanpa Musnah Ultrasonik, Dalam: (peny.), Pascasidang Penyelidikan & Pengembangan 1999, Jabatan Kejuruteraan Mekanik dan Bahan, UKM , Sept 2-3.
  13. Rozli Zulkifli, Kamaruzzaman Sopian, Zulkefli Sulian dan Jaafar Sahari, 1999. Sifat Tegangan dan kekonduksian Terma Komposit Karbon Hitam/Getah Asli Termoplastik, Dalam: (peny.), Pascasidang Penyelidikan & Pengembangan 1999, Jabatan Kejuruteraan Mekanik dan Bahan, UKM, Sept 2-3.
  14. Rozli Zulkifli, Mohd Jailani Mohd Nor dan N. Valiyappan David, 1999. Pencirian Sifat Mekanik Bahan Komposit Polimer Bertetulang Gentian Asli Pelepah Kelapa Sawit, Dalam: (peny.), Pascasidang Penyelidikan & Pengembangan 1999, Jabatan Kejuruteraan Mekanik dan Bahan, UKM, Sept 2-3.
  15. Jaharah A. Ghani, Shalby Reduan and Rozli Zulkifli, "Tools for Batch Production System", Faculty of Engineering (UKM) Colloquium, Medan, Sumatera Utara, 28 Nov. - 2 Dec. 1996, (FK 53/93).

 

Book Chapters


  1. Rozli Zulkifli and Che Husna Azhari, Surface Treatment and Fracture Analysis of Natural Silk Composites, Advances in Materials Processing (Volume 3) 2012, edited by Che Husna Azhari, Andanastuti Muchtar, Zaidi Omar and M.J. Ghazali.
  2. Yusof Ali, Rozli Zulkifli, Ahmad Rasdan Ismail, Mohd Nizam Abd Rahman & Mohd Zaidi Omar (editors), Prosiding Kolokium: Penyelidikan dan Pengembangan 2005, Jabatan Kejuruteraan Mekanik & Bahan, UKM (ISBN: 983-2975-55-7) 
  3. Rozli Zulkifli, Lee Kai Fatt, Che Husna Azhari and Jaafar Sahari, "Effect of Natural Rubber on the Interlaminar Fracture Properties of Fibre Reinforced Thermoplastic Composites" in A.M.S. Hamouda, S.Sulaiman and M.Ahmadun (editors), Advances in Materials and Processing Technologies, SIRIM Press, Vol. 1, pp.232-238, 1998.
  4. K. Sopian, R.Zulkifli, J.Sahari and M.Y.Othman, “Thermal Performance of Thermoplastic Natural Rubber Solar Collector” in A.M.S. Hamouda, S.Sulaiman and M.Ahmadun (editors), Advances in Materials and Processing Technologies, SIRIM Press, Vol. 1, pp.247-253, 1998.


 

| Home | Teaching | Research | Publications | Professional Affiliations | Awards | Supervisions | | Motivations | Etc | Photo | |

 

 

updated 10 May 2012