Department of Engineering Education

 Jabatan Pendidikan Kejuruteraan

Publications

Indexed Journal

No.

Paper

1. Azami Zaharim, Yuzainee Md Yusoff, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Ramli Mustapha, Perceptions and Expectation Toward Engineering Graduates by Employers : A Malaysian Study Case, WSEAS TRANSACTIONS on ADVANCES in ENGINEERING EDUCATION, Issue 9, Volume 6, September 2009, pp. 296-305 (ISSN: 1790-1979)
2. Azami Zaharim, Yuzainee Md Yusoff, Mohd Zaidi Omar, Azah Mohamed, Norhamidi Muhamad, Ramli Mustapha, Employers Perception towards Engineering Employability Skills In Asia, WSEAS TRANSACTIONS on ADVANCES in ENGINEERING EDUCATION, Issue 9, Volume 6, September 2009, pp. 306-315 (ISSN: 1790-1979)
3. Azami Zaharim, Mohd Zaidi Omar, Hassan Basri, Norhamidi Muhamad, Farah Liza Mohd Isa, A Gap Study between Employers’ Perception and Expectation of Engineering Graduates in Malaysia, WSEAS TRANSACTIONS on ADVANCES in ENGINEERING EDUCATION, Issue 11, Volume 6, September 2009, pp. 409-419 (ISSN: 1790-1979)
4. M.Z.Omar, N.T. Kofli, K. Mat, Z.M. Darus, S.A. Osman and M.N.A. Rahman, Measuring the Outcomes from Industrial Training Program, European Journal of Social Sciences, Vol. 8, No. 4, 2009, pp. 581-588
5. Zuhairuse Md Darus, Fadzil Hassan, Masran Saruwono, Mohd Zaidi Omar, Zulkiflee Samad, Fadhil Muhamad & Noraziah Mohammad, Meanings and Interchangeability of Continuing Professional Development, Training and Education and Their Connection and Influence on Learning and Development in Built Environment, Asean Journal of Teaching and learning in Higher Education (AJTLHE) Vol 1, No 1, 2009, pp. 1-7
6. Azami Zaharim, Mohd Zaidi Omar, Shahrum Abdullah, Hassan Basri, NorHamidi Muhamad,International Trends and the Profiles of Malaysian Engineers, European Journal of Scientific Research, Vol 28, No 2, 2009, pp. 301-309
7. Mohd Nizam Ab Rahman, Mohd Zaidi Omar, Norhisham Tan Kofli, Kamaruzaman Mat, Siti Aminah Osman, Zuhairuse M Darus. Assessment of Engineering Students Perception after Industrial Training Placement, European Journal of Social Sciences, Vol. 8, No. 3, 2009, pp. 420-431
8. A. Muchtar, M.Z. Omar and A. Hunger, Lessons from the Joint UKM-UDE (Malaysia-Germany) Student Mobility Programs, European Journal of Social Sciences, Vol. 8, No. 3, 2009, pp. 413-419
9. Shahrir Abdullah, Riza Atiq Abdullah O.K. Rahmat, Azami Zaharim, Norhamidi Muhamad, Baba Md. Deros, Noorhisham Tan Kofli, Mardina Abdullah, Mazlan Mohd. Tahir, Andanastuti Muchtar, Che Husna Azhari. 2009. Implementing Continual Review of Programme Educational Objectives and Outcomes for OBE Curriculum Based on Stakeholders’ Input, European Journal of Scientific Research, Vol.29(1), pp.89-99, ISSN 1450-216X
10. Andanastuti Muchtar & Rosadah Abdul Majid. 2009. Nurturing Creativity in Young Children for Heightened Engineering Prowess, European Journal of Social Sciences 8 (3): 406-412
11. Nopiah Z.M., Zainuri N.A., Asshaari I., Othman H., Abdullah S., 2009. Improving generic skills among engineering students through problem based learning in statistics engineering course, European Journal of Scientific Research, 33(2):270-278
12. Azami Zaharim, Mohd Marzuki Mustafa, Khamisah Jafar, Norhamidi Muhamad. 2009. Corak Pencapaian Pelajar Kumpulan Pertama Sistem Pendidikan Berasaskan Hasil Fakulti Kejuruteraan Universiti Kebangsaan Malaysia, ASEAN Journal Of Teaching And Learning In Higher Education, Volume 1, No. 1, pp 58-64, ISSN:1985-5826
13. Shahrir Abdullah, Norhamidi Muhamad, Riza Atiq Abdullah O.K. Rahmat, Baba Md. Deros, Noorhisham Tan Kofli, Mardina Abdullah, Mazlan Mohd. Tahir, & Andanastuti Muchtar. 2009.Penilaian Objektif dan Hasil Program Pendidikan Berasaskan Hasil (OBE): Soal Selidik Majikan Industri dan Alumni, ASEAN Journal of Teaching and Learning in Higher Education 1(2): 1-8
14. Azrilah Abd Aziz, Azlinah Mohamed, NoorHabibah Arshad, Sohaimi Zakaria, Azami Zaharim, Hamza Ahmad Ghulman and Mohd Saidfudin Masodi, Application of Rasch model in Validating The Construct of Measurement Instrument, International Journal Of Education and Information Technologies, Issue 2, Vol 2, 2008
15. Z. Mustafa, Z.A Norkisme, N.R.M.Suradi, W.R.Ismail, F.A.A Shahbuddin, Z.M. Ali and A. Zaharim,Engineering Education, Profession and Employer: Perception of Engineers in Electronic Sector, 5th WSEAS / IASME International Conference on Engineering Education (EE’08), July 2008, hlm 355-359, ISSN 1790-2769
16. Rozeha A Rashid, Ruzimah Abdullah, Azami Zaharim, Hamzah Ahmad Ghulam and Mohd Saidfudin Masodi, Engineering Students Perfomance Evaluation Of Generic Skills Measurement: ESPEGS Model, 5th WSEAS / IASME International Conference on Engineering Education (EE’08), July 2008, hlm 377-382, ISSN 1790-2769
17. Arzilah Abd Aziz, Azlinah Mohamed, Azami Zaharim, Sohaimi Zakaria, Hamzah Ahmad Ghulman and Mohd Saidfudin Masodi, Evaluation of Information Professional Competency Face Validity Test Using Rasch Model, 5th WSEAS / IASME International Conference on Engineering Education (EE’08), July 2008, hlm 396-403, ISSN 1790-2769
18. Azami Zaharim, A Gap Study Between Employers’ Perception and Expectation of Engineering Graduates in Malaysia, 5th WSEAS / IASME International Conference on Engineering Education (EE’08), July 2008, hlm 404-407, ISSN 1790-2769
19. Mohd Zaidi Omar, Mohd.Nizam Ab.Rahman, Noorhisham Tan Kofli, Kamaruzaman Mat, Zuhairuse Md.Darus, Siti Aminah Osman & Ruhizan Mohd Yasin “Assessment of Engineering Students Perception After Industrial Training Placement “, 4th WSEAS / IASME International Conference on Educational Technologies (EDUTE’08), October 2008, hlm 131-135, ISSN 1790-5109
20. Zuhairuse Md Darus, Fadzil Hassan, Zaidi Omar, Masran Saruwono, Noraziah Mohammad, Zulkifli Abdul Sham, Continuing Professional Development, Training and Education As Part of Technology For Learning Process in Built Enviroment, 7th WSEAS International Conference on Education and Educational Technology (EDU’08), November 2008, hlm 157-162, ISSN 1790-5109
21. Shahrir Abdullah, Riza Atiq Abdullah O.K.Rahmat, Azami Zaharim, Norhamidi Muhamad, Baba Md Deros, Noorhisham Tan Kofli, Mardina Abdullah, Mazlan Mohd.Tahir, Andanastuti Muchtar and Che Husna Azhari, Implementing Continual Review of Programme Educational Objectives and Outcomes for OBE Curriculum Based on Stakeholders’ Input, 7th WSEAS International Conference on Education and Educational Technology (EDU’08), November 2008, hlm 218-223, ISSN 1790-5109
22. M.Z. Omar, N.T. Kofli, K.Mat, Z.M.Darus, S.A.Osman, M.N.A.Rahman, S.Abdullah, Employers’ Evaluation On Attributes Obtained During Industrial Training, 7th WSEAS International Conference on Education and Educational Technology (EDU’08), November 2008, hlm 259-263, ISSN 1790-5109
23. Adi Irfan Che Ani, Azami Zaharim, Zuhairuse Md. Darus, Norngainy Mohd. Tawil, The Formulation of Evaluating Timber Defects as a Tool for Building Survey, WSEAS International Conference on Caltural Heritage and Tourism (CUHT’08), July 2008, hlm 125-130, ISSN 1790-2769
24. Assoc Prof Ar. Zuhairuse Md. Darus, Roslan Saat, Assoc Prof Dr. Azami Zaharim, Assoc Prof Dr. Zaidi Omar & Sr.Dr. Adi Irfan Che Ani, Native Regionalism In Development of Resort In Malaysia, WSEAS International Conference on Caltural Heritage and Tourism (CUHT’08), July 2008, hlm 131-135, ISSN 1790-2769
25. Khairul Anuar Mohd.Ali, Zainol Mustafa, Kamarulzaman Ibrahim, Azami Zaharim & Koh Mei Sin,Correlation Analysis on Buyer-Seller Relationship in Malaysia: With Reference to Similarity and Relationship in Managerial and Quality Perspective, 1th WSEAS International Conference on Multivariate Analysis and its Application in Science and Engineering (MAASE’08), May 2008, hlm 99-104, ISSN 1790-5117
26. S.A. Osman, M.Z. Omar, N.T. Kofli, K.Mat, Z.M.Darus & M.N.A. Rahman, The Importance Of Industrial Training: Students’ Perception in Civil Engineering Sector, 7th WSEAS International Conference on Education and Educational Technology (EDU’08), November 2008, hlm 121-125, ISSN 1790-5109
27. Mohd Zaidi Omar, Mohd.Nizam Ab.Rahman, Noorhisham Tan Kofli, Kamaruzaman Mat, Zuhairuse Md.Darus, Siti Aminah Osman & Ruhizan Mohd Yasin, Assessment of Engineering Students Perception After Industrial Training Placement, 4th WSEAS / IASME International Conference on Educational Technologies (EDUTE’08), October 2008, hlm 131-135, ISSN 1790-5109