Centre for Automotive Research


Penerbitan Tahun 2015

  1. A. Arifin, W.Z.W. Jusoh, S. Abdullah, N. Jamaluddin and A.K. Ariffin, 2015, Investigating the fatigue failure characteristics of A283 grade C steel using magnetic flux detection. Steel and Composite Structures, 19(3): 601-614.
  2. A. Rajabi, M.J. Ghazali, A.R. Daud, 2015, Effect of second phase morphology on wear resistance of Fe-TiC composites, Jurnal Tribologi, 4 (2015) 1-9.
  3. A.L. Maslow, M. J. Ghazali, C.T. Ratnam, R.J Talib & C.H. Azhari, 2015, Braking condition optimisation of semi-metallic epoxidised ENRAN friction materials produced by radiation curing via RSM, International Journal of Fracture Fatigue and Wear, 3: 279-286.
  4. A.R. Ismail, Siti Nur Atikah Abdullah, A.A. Abdullah and B.M. Deros, 2015, A descriptive analysis of factors contributing to bus drivers performances while driving – a case study in Malaysia, International Journal of Automotive and Mechanical Engineering, 11: 2430-2437.
  5. Aghil Shavalipour, Sallehuddin Mohamed Haris, Zulkifli Mohd Nopiah, 2015, Symbolic parametric LQR controller design for an active vehicle suspension system, Journal of Applied Sciences, 1127-1132.
  6. Aghil Shavalipour, Sallehuddin Mohd Haris, Zulkifli Mohd Nopiah, 2015, Algebraic H2 optimal control design in an active vehicle suspension application, International Review on Modelling and Simulations, 377-385.
  7. Azli Ariffin, Meor Iqram Meor Ahmad, Shahrum Abdullah and Wan Zulhelmi Wan Jusoh, 2015, Detection of cracked position due to cyclic loading for ferromagnetic materials based on magnetic memory method, Jurnal Teknologi, 75:7 (2015) 67–70.
  8. Baba Md Deros, Rosnah Mohd Yusuff, Siti Zawiah Md Dawal, Shamsul Bahri Mohd Tamrin, Dian Darina Indah Daruis, Karmegam Karupiah, Ruhaizin Sulaima, 2015, Driving sustainable human performance, Jurnal Teknologi, 77(27): 150.
  9. C.L. Hoo, Sallehuddin Mohamed Haris, Edwin C. Y. Chung and Nik Abdullah Nik Mohamed, 2015, New integral antiwindup scheme for PI motor speed control, Asian Journal of Control, 2115-2132.
  10. Choon Lih Hoo, Edwin Chin Yau Chung, Sallehuddin Mohamed Haris, Nik Abdullah Nik Mohamed, 2015, Steady-state integral proportional integral controller for PI motor speed controllers: A theoretical approach, ICIC Express Letters, 4(5): 1777-1782.
  11. Choon Lih Hoo, Sallehuddin Mohamed Haris, Edwin Chin Yau Chung, Nik Abdullah Nik Mohamed, 2015, Steady-state integral proportional integral controller for PI motor speed controllers, Journal of Power Electronics, 15(1): 177-189.
  12. Eshkoor R.A., Ude A.U., Sulong A.B., Zulkifli R., Ariffin A.K., Azhari C.H., 2015, Energy absorption and load carrying capability of woven natural silk epoxy – triggered composite tubes, Composites Part B: Engineering, 77 (2015) 10-18.
  13. F. Djamaluddin, S. Abdullah, A.K. Arrifin and Z.M. Nopiah, 2015, Modeling and optimization of aluminum foam cylindrical double tubes under axial impact, Journal of Mechanical Engineering and Sciences, 8: 1383-1392.
  14. Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah, Mohd Radzi Abu Mansor, 2015, A review of soot particle measurement in lubricating oil defense, S&T Technical Bulletin, 141-152.
  15. Ghazali F.A., Manurung Y.H.P., Mohamed M.A., Alias S.K., Abdullah S., 2015, Effect of process parameters on the mechanical properties and failure behavior of spot welded low carbon steel, Journal of Mechanical Engineering and Sciences, 8: 1489-1497.
  16. Haslina Abdullah, Rizauddin Ramli, Dzuraidah Abd Wahab, Jaber Abu Qudeiri, 2015, Simulation approach of cutting tool movement using artificial intelligence method, Journal of Engineering Science and Technology, 35-44.
  17. Hastinatun Mukayat, Ismail Ab. Raman, Khairiah Badri, Wan Mohd Faizal Wan Mahmood and Suria Ramli, 2015, The influence of water in water-microemulsified-diesel and its impact on fuel properties and engine performance, The Malaysian Journal of Analytical Sciences, 19(1): 251 – 260.
  18. Helmisyah Ahmad Jalaludin, Mohd Ruysdi Ramliy, Nik Rosli Abdullah, Salmiah Kasolang, Shahrir Abdullah, Asiah Abd Rahim, Zeno Michael, 2015, Investigation on Characteristics of POME blended diesel engine, Jurnal Teknologi, 75:8 (2015) 1–5.
  19. Ismail A.R., Abdullah S.N.A., Abdullah A.A., Deros B.M., 2015, Whole-body vibration exposure of Malaysian taxi drivers, International Journal of Automotive and Mechanical Engineering, 11: 2786-2792.
  20. K.F. Mustafa, S. Abdullah, M. Z. Abdullah, and K. Sopia, 2015, Combustion characteristics of butane porous burner for thermoelectric power generation, Journal of Combustion, 1-13.
  21. K.S. Alhawari, M.Z. Omar, M.J. Ghazali, M.S. Salleh, M.N. Mohammed, 2015, Evaluation of the microstructure and dry sliding wear behaviour of thixoformed A319 aluminium alloy, Materials and Design, 76 (2015) 169–180.
  22. Karam Singh S.S, Abdullah S., Nik Mohamed N.A, 2015, Reliability analysis and prediction for time to failure distribution of an automobile crankshaft, Eksploatacja i Niezawodnosc, 408-415.
  23. Kareem Z.S., Jaafar M.N.M., Lazim T.M., Abdullah S., Abdulwahid A.F., 2015, Heat transfer enhancement comparisons in different tube shapes, International Review on Modelling and Simulations, 8: 232­238.
  24. Karim Z., Nuawi M.Z., Ghani J.A., Ghazali M.J., Abdullah S., Mansor N.I.I., 2015, Sliding wear evaluation of aluminum alloy (7075-T6) on hardened steel (AISI4340) via non-contact technique by I-kaz multi-level analysis, Wear, 99-104.
  25. M.F.M. Yunoh, S. Abdullah, M.H.M. Saad, Z.M. Nopiah, M.Z. Nuawi, 2015, Fatigue feature extraction analysis based on a K-Means clustering approach, Journal of Mechanical Engineering and Sciences, 8: 1275-1282.
  26. M.R. Jamli, A.K. Ariffin, D.A. Wahab, 2015, Incorporating feedforward neural network within finite element analysis for L-bending springback prediction, Expert Systems with Application, 2604-2614.
  27. Md Ishak N.A.I., Raman I.A., Yarmo M.A., Wan Mahmood W.M.F., 2015, Ternary phase behavior of water microemulsified diesel-palm biodiesel, Frontiers in Energy, 162-169.
  28. Mohamed A. Siba, Wan Mohd Faizal Wan Mahmood, Mohd Z. Nuawi, Rasidi Rasani, and Mohamed H. Nassir, 2015, Modeling and applications of 3D flow in orifice plate at low turbulent reynolds numbers, International Journal of Mechanical and Mechatronics Engineering, 15(4): 19-25.
  29. Mohamed A. Siba, Wan Mohd Faizal Wan Mahmood, Mohd Z. Nuawi, Rasidi Rasani, and Mohamed H. Nassir, 2015, Wall pressure due to turbulent flow through orifice plate, International Journal of Mechanical & Mechatronics Engineering, 15(2): 36-41.
  30. Mohd Azwan Husin, Rozli Zulkifli, Shahrum Abdullah, Wan Ramli Wan Daud, 2015, Effect of NaOH concentration on mode ii critical strain energy release, GIIC for woven mengkuang fibre reinforced epoxy laminated composites, International Journal of Mechanical & Mechatronics Engineering, 15(4): 26-31.
  31. Mohd Radzi Abu Mansor, Tan Chun Hyiin, Nik Muhammad Hafiz, Wan Mohd Faizal Wan Mahmood, W Ghopa Wan Aizon, Shahrir Abdullah, 2015, Fundamental study on combustion characteristics of direct injection gaseous fuel, ARPN Journal of Engineering and Applied Sciences, 10(17): 7375-7379.
  32. Mohd Rashdan Awang, Rozli Zulkifli and Shahrir Abdullah, 2015, Minichannel LCP for EV battery cooling: effect of fin spacing, International Journal of Mechanical & Mechatronics Engineering, 15(4): 68-73.
  33. N.A. Aziz, D.A. Wahab, R. Ramli, C.H. Azhari, 25015, Modelling and optimisation of upgradability in the design of multiple life cycle products: a critical review, Journal of Cleaner Production, 282-290.
  34. Nor Kamaliana Khamis, Nadzirah Basrah, Baba Md Deros, Mohd Zaki Nuawi, 2015, Electromyography as an objective measurement for evaluating physical fatigue: an overview, Jurnal Teknologi, 77:27 (2015) 51–57.
  35. Prakash Thamburaja, Benjamin Klusemann, Sara Adibi and Swantje Bargmann, 2015, The plastic yield and flow behavior in metallic glasses, Applied Physics Letters, 051903.
  36. Putra T.E., Abdullah S., Schramm D., Nuawi M.Z., Bruckmann T., 2015, Generating strain signals under consideration of road surface profiles, Mechanical Systems and Signal Processing, 60-61 (2015) 485–497.
  37. Reza Alebrahim, Sallehuddin Mohammed Haris, Nik Abdullah Nik Mohamed, Shahrum Abdullah, 2015, Vibration analysis of self-healing hybrid composite beam under moving mass, Composite Structures, 119 (2015) 463–476.
  38. Rusalbiah Che Mamat*, Baba Md Deros, Mohd Nizam Ab Rahman,Muhamad Khalil Omar, Shukriah Abdullah, 2015, Soft lean practices for successful lean production system implementation in Malaysia automotive SMES: a proposed framework, Jurnal Teknologi, 77:27 (2015) 141–150.
  39. Safat B. Wali, Mahammad A. Hannan and Shahrum Abdullah, Aini Hussain, Salina A. Samad, 2015, Shape matching and color segmentation based traffic sign detection system, Przeglad Electrotechniczny (Electrical Review), 36-40.
  40. Saud Binjuwair, Taib Iskandar Mohamad, Ahmed Almaleki, Abdullah Alkudsi, Ibrahim Alshunaifi, The effects of research octane number and fuel systems on the performance and emissions of a spark ignition engine: A study on Saudi Arabian RON91 and RON95 with port injection and direct injection systems, Fuel, 158: 351-360.
  41. T.F. Go, D.A. Wahab, H. Hishamuddin, 2015, Multiple generation life-cycles for product sustainability: the way forward, Journal of Cleaner Production, 16-29.
  42. Taib Iskandar Mohamad, 2015, In-water injection of high-pressure pulsed gas jet: A simple analytical tool for direct injection of gaseous fuels in automotive engine, Fuel, 160 (2015) 386–392.
  43. Zairulazha Zainal, Rizauddin Ramli, Mohd Marzuki Mustafa, 2015, Angle discrete interval selection technique (ADIST) on optical flowvectors in estimating orientation of vision system, ICIC Express Letters, 817-822.
  44. Zuber M.A., Wan Mahmood W.M.F., Harun Z., Zainol Abidin Z., La Rocca A., Shayler P., Bonatesta F., 2015, Modeling of in-cylinder soot particle size evolution and distribution in a direct injection diesel engine, SAE Technical Papers.
  45. Zulkifli Mohd Nopiah, Ahmad Kadri Junoh and Ahmad Kamal Ariffin, 2015, A novel hybrid fuzzy nonlinear weighted goal programming for optimising interior acoustics level in car cabin, Journal of Vibration and Control, 21(9): 1721­1744.

Translate »