Publication 2018

  1. A new method for the fabrication of a bilayer WO3/Fe2O3 photoelectrode for enhanced photoelectrochemical performance Materials Research Bulletin
  2. A review of key parameters for effective electrophoretic deposition in the fabrication of solid oxide fuel cells Journal of Zhejiang University: Science A
  3. A review on production and characterization of biochars for application in direct carbon fuel cells Process Safety and Environmental Protection
  4. A short overview current research of catalyst for methanol oxidation reaction in direct methanol fuel cell (DMFC) from experimental and theoretical aspect Jurnal Kejuruteraan
  5. A short review on the modeling of solid-oxide fuel cells by using computational fluid dynamics: assumptions and boundary conditions International Journal of Integrated Engineering
  6. A short review on the proton conducting electrolytes for solid oxide fuel cell applications Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
  7. Aplikasi keluli tahan karat sebagai elektrod logam di dalam sistem bioelektrokimia Jurnal Kejuruteraan
  8. Aryl diazonium modification for improved graphite fiber brush in microbial fuel cell Sains Malaysiana
  9. Carbon and non-carbon support materials for platinum-based catalysts in fuel cells International Journal of Hydrogen Energy
  10. Challenges in fabricating solid oxide fuel cell stacks for portable applications: a short review International Journal of Integrated Engineering
  11. Choline Chloride:urea based deep eutectic solvent as additive to proton conducting chitosan films Journal of Engineering Science and Technology
  12. Comparison of performance and ionic concentration gradient of two chamber microbial fuel cell using ceramic membrane (CM) and cation exchange membrane (CEM) as separators Electrochimica Acta
  13. Concurrent growth, structural and photocatalytic properties of hybridized C, N co-doped TiO2 mixed phase over g-C3N4 nanostructured Scripta Materialia
  14. Constructing bio-templated 3D porous microtubular C-doped g-C3N4 with tunable band structure and enhanced charge carrier separation Applied Catalysis B: Environmental
  15. Corrosion inhibition of cold-rolled low carbon steel with pulse fiber laser ablation in water Journal of Materials Engineering and Performance
  16. Development of 2D multiphase non-isothermal mass transfer model for DMFC system Energy
  17. Effect of H3 PO4 and KOH as the activating agents on the synthesis of low-cost activated carbon from duckweeds plants Jurnal Kejuruteraan
  18. Effect of Modified Natural Filler O-Methylene Phosphonic kappa-Carrageenan on Chitosan-Based Polymer Electrolytes Energies
  19. Effect of Temperature on the Mechanical Performance of Highly Conductive Composites for HT-PEMFC Application Jurnal Kejuruteraan
  20. Effect of ZnO filler on PVA-alkaline solid polymer electrolyte for aluminum-air battery applications The Electrochemical Society Journals
  21. Effect of carbon precursor and initial pH on cobalt-doped carbon xerogel for oxygen reduction International Journal of Hydrogen Energy
  22. Effect of deep eutectic solvent in proton conduction and thermal behaviour of chitosan-based membrane Journal of Molecular Liquids
  23. Effect of torrefaction and pyrolysis on the electrochemical reaction in direct carbon fuel cells Journal of Engineering Science and Technology
  24. Effects of Nio loading and pre-calcination temperature on io-sdcc composite anode powder for low-temperature solid oxide fuel cells Ceramics-Silikáty
  25. Effects of applied potential and reactants to hydrogen-producing biocathode in a microbial electrolysis cell Frontiers in Chemistry
  26. Effects of die configuration on the electrical conductivity of polypropylene reinforced milled carbon fibers: an application on a bipolar plate Polymers
  27. Effects of filler Size on the mechanical properties of polymer-filled dental composites: a review of recent developments Journal of Physical Science
  28. Effects of sintering temperature on the structural and electrochemical properties of SrFe0.5Ti0.5O3-d perovskite cathode International Journal of Applied Ceramic Technology
  29. Electrical and electrochemical characteristics of La0.6Sr0.4CoO3-d cathode materials synthesized by a modified citrate-EDTA sol-gel method assisted with activated carbon for proton-conducting Journal of Sol-Gel Science and Technology
  30. Electrical conductivity models of die configuration for polypropylene-reinforced milled carbon fibre Journal of Advanced Manufacturing Technology
  31. Electrochemical characterisation of heat treated metal and non metal anodes using mud in microbial fuel cell Sains Malaysiana
  32. Electrochemical performance of sol-gel derived La0.6Sr0.4CoO3-d cathode material for proton-conducting fuel cell: A comparison between simple and advanced cell fabrication techniques Processing and Application of Ceramics
  33. Electrochemical sunset yellow biosensor based on photocured polyacrylamide membrane for food dye monitoring Sensors
  34. Electrode for proton exchange membrane fuel cells: A review Renewable and Sustainable Energy Reviews
  35. Elektrolit dwi lapisan bagi sel fuel oksida pepejal bersuhu sederhana-rendah: ulasan kajian Jurnal Kejuruteraan
  36. Enhanced biogas production from agro waste by Co-digestion with crude oil Jurnal Kejuruteraan
  37. Enhanced electrochemical performance of LSCF cathode through selection of optimum fabrication parameters Journal of Solid State Electrochemistry
  38. Enhanced hydrogen selectivity from catalytic decomposition of formic acid over FeZnIr nanocatalyst at room temperature Research on Chemical Intermediates
  39. Enhanced mechanical flexibility and performance of sodium alginate polymer electrolyte bio-membrane for application in direct methanol fuel cell Journal of applied polymer science
  40. Enhanced proton conductivity and methanol permeability reduction via sodium alginate electrolyte-sulfonated graphene oxide bio-membrane Nanoscale Research letters
  41. Enhancement in photocatalytic degradation of methylene blue by LaFeO3 -GO integrated photocatalyst-adsorbents under visible light irradiation Korean Journal of Chemical Engineering
  42. Experimental and DFT investigation on the influence of electron donor/acceptor on the hydrogen bonding interactions of 1-(1,3-Benzothiazol-2-yl)-3-(R-Benzoylthiourea) Sains Malaysiana
  43. Experimental and theoretical study of Cu2 O photoelectrode and Cu2 O doped with Ag, Co, Ni and Zn metals for water splitting application Jurnal Kejuruteraan
  44. Fabrication process of cathode materials for solid oxide fuel cells Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
  45. Facile preparation of ultra-low Pt loading graphene-immobilized electrode for methanol oxidation reaction International Journal of Hydrogen Energy
  46. Factors influencing thermal stress development in solid oxide fuel cells Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
  47. Heat treatment effect on the phase and morphology of NiO-BCZY prepared by an evaporation and decomposition of solution and suspension method Sains Malaysiana
  48. Highly photoactive Cu2O nanowire film prepared with modified scalable synthesis method for enhanced photoelectrochemical performance Solar Energy Materials and Solar Cells
  49. Improved fermentability of pretreated glycerol enhanced bioconversion of 1,3-propanediol Industrial and Engineering Chemistry Research
  50. Improvement of colloidal stability in colloidal processing for highly translucent, nanosized zirconia Sains Malaysiana
  51. In-depth understanding of core-shell nanoarchitecture evolution of g-C3N4@C, N co-doped anatase/rutile: Efficient charge separation and enhanced visible-light photocatalytic performance Applied Surface Science
  52. Incorporation of thermally labile additives in carbon membrane development for superior gas permeation performance Journal of Natural Gas Science and Engineering
  53. Increasing the proton conductivity of sulfonated polyether ether ketone by incorporating graphene oxide: Morphology effect on proton dynamics. Japanese Journal of Applied Physics
  54. Influence of oxygen ion enrichment on optical, mechanical, and electrical properties of LSCF perovskite nanocomposite Ceramics International
  55. Influence of presintering parameters on the mechanical properties of presintered dental zirconia block International Journal of Integrated Engineering
  56. Influence of silver addition on the morphological and thermal characteristics of Nickel Oxide-Samarium Doped Ceria Carbonate (NiO-SDCC) composite anode International Journal of Integrated Engineering
  57. Influences of the processing method and sintering temperature on the translucency of polycrystalline yttria-stabilized tetragonal zirconia for dental applications Ceramics International
  58. Integrasi sistem penulenan biohidrogen dan aplikasi sel fuel Jurnal Kejuruteraan
  59. Interconnect development for solid oxide fuel cell application Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
  60. Kajian elektrolit polimer berasaskan getah asli terubah suai (MG49) dalam sel suria terpeka pewarna Sains Malaysiana
  61. Kajian fotomangkin berasaskan grafin untuk penurunan karbon dioksida Jurnal Kejuruteraan
  62. Kenaf reinforced PLA composite thermoforming: a numerical simulation International Journal of Integrated Engineering
  63. Kesan pemendapan elektroforesis gam arab terhadap kakisan SS316 L dalam persekitaran asid Jurnal Kejuruteraan
  64. Kesan resonans plasmon aurum terhadap prestasi fotoelektrokimia fotokatod Cu2O Sains Malaysiana
  65. Mathematical modeling, simulation, and analysis for predicting improvement opportunities in the continuous catalytic regeneration reforming process Chemical Engineering Research and Design
  66. Molecular dynamics simulations of sodium alginate/ sulfonated graphene oxide membranes properties Heliyon
  67. Morphological and physical behaviour on the Sm0.5Sr0.5CoO3-S/Sm0.2 Ce0.8O1.9 incorporation with binary carbonate as potential cathode materials for SOFC Key Engineering Materials
  68. Morphological studies on the agglomeration of FeCo supported nitrogen-doped reduced graphene oxide catalyst prepared at varying annealing temperature Jurnal Kejuruteraan
  69. Nanocatalyst FeN4/C molecular orbital behaviour for Oxygen Reduction Reaction (ORR) in Cathode Direct Methano Fuel Cell (DMFC) Jurnal Kejuruteraan
  70. Ni-based catalyst supported on Mesostructured Silica Nanoparticles (MSN) for Methanol Oxidation Reaction (MOR) Jurnal Kejuruteran
  71. Novel anodic catalyst support for direct methanol fuel cell: characterizations and single cell performances Nano Research Letters
  72. Numerical analysis of flow distribution behavior in a proton exchange membrane fuel cell Heliyon
  73. Optical, mechanical and electrical properties of LSCF-SDC composite cathode prepared by sol-gel assisted rotary evaporation technique Journal of Sol-Gel Science and Technology
  74. Optimization of energy management system for fuel-cell hybrid electric vehicles: issues and recommendations Applied Energy
  75. Overview of computational fluid dynamics modelling in solid oxide fuel cell Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
  76. P-type Cu2ZnSnS4 as multifunctional material for photovoltaic and thermoelectric application: theoretical investigation Jurnal Kejuruteraan
  77. Passivated dye-sensitised TiO2 photoanode with conductive polymer with improved photocatalyst stability for photoelectrochemical application Ionics
  78. Penyediaan pelet elektrolit Sr0.6Ba0.4Ce0.9Ga0.1O3-d melalui kaedah glisina nitrat bagi aplikasi sel fuel oksida pepejal konduktor proton Jurnal Kejuruteraan
  79. Performance of a direct formic acid fuel cell fabricated by ultrasonic spraying International Journal of Hydrogen Energy
  80. Performance of crosslinked sodium alginate/ sulfonated graphene oxide as polymer electrolyte membrane in DMFC application: RSM optimization approach International Journal Of Hydrogen Energy
  81. Performance of titanium-nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells Journal of the Taiwan Institute of Chemical Engineers
  82. Perovskite-based mixed protonic-electronic conducting membranes for hydrogen separation: Recent status and advances Journal of Industrial and Engineering Chemistry
  83. Perovskite-based proton conducting membranes for hydrogen separation: A review International Journal of Hydrogen Energy
  84. Photocatalytic properties of two dimensional graphene and layered transition metal dichalcogenides based photocatalyst for photoelectrochemical hydrogen generation: an overview International Journal of Hydrogen Energy
  85. Physical properties optimization of POME-groundnut-naphthenic based graphene nanolubricant using response surface methodology Journal of Cleaner Production
  86. Platinum-based catalysts on various carbon supports and conducting polymers for direct methanol fuel cell applications: a review Nanoscale Research Letters
  87. Polymer-based approach in ceramic materials processing for energy device applications Academic Journal of Polymer Science
  88. Polyol synthesis of reduced graphene oxide supported platinum electrocatalysts for fuel cells: Effect of Pt precursor, support oxidation level and pH International Journal of Hydrogen Energy
  89. Preleminary study of alkalined Direct Ethanol fuel cell by using crosslinked quatinized Poly (vinyl alcohol) Grahene oxide membrane Jurnal Kejuruteraan
  90. Preliminary study of alkaline direct ethanol fuel cell by using crosslinked Quaternized Poly (vinyl alcohol)/Graphene oxide membrane Jurnal Kejuruteraan
  91. Recent perspectives and crucial challenges on Unitized Regenerative Fuel Cell (URFC) Jurnal Kejuruteraan
  92. Sifat serbuk dan sifat elektrik bahan katod La0.6Sr0.4CoO3-d yang disediakan melalui kaedah sol-gel terubahsuai bagi aplikasi sel fuel oksida pepejal Jurnal Kejuruteraan
  93. Silica-related membranes in fuel cell applications: an overview International Journal of Hydrogen Energy
  94. Simulation of PEMFC stack for portable power generator application Jurnal Kejuruteraan
  95. Structural and Optical Properties Investigation on H-Bonded 1D Helical Self-Assembly of 1,1-Dibenzyl-3-(2-Bromobenzoyl)Thiourea Molecules for Nonlinear Optical Application Sains Malaysiana
  96. Structural and morphological study of sulfonated graphene oxide prepared with different precursor Jurnal Kejuruteraan
  97. Structural, optical and electrical properties of Ce0.8Sm0.2-xErxO2-d (x=0-0.2) Co-doped ceria electrolytes Ceramics International
  98. Study on the physical and chemical composition of agro wastes for the production of 5-hydroxymethylfurfural Bioresource Technology
  99. Supramolecular structures of rhenium(I) complexes mediated by ligand planarity via the interplay of substituents Acta crystallographica. Section C, Structural chemistry
  100. Synthesis and characterization of Zn-doped LiCoO2 material prepared via glycine-nitrate combustion method for proton conducting solid oxide fuel cell application Jurnal Kejuruteraan
  101. Synthesis, Structure and DFT study of a Rhenium(I) Pyridylpyrazole Complex as a Potential Photocatalyst for CO2 Reduction Sains Malaysiana
  102. Synthesis, structure and spectroscopic properties of oxovanadium tris(3,5-dimethylpyrazolyl)borate aroylthiourea complexes Sains Malaysiana
  103. Thermophysical properties of glycerol and polyethylene glycol (PEG 600) based DES Journal of Molecular Liquids
  104. Titanate-based perovskites for photochemical and photoelectrochemical water splitting applications: a review International Journal of Hydrogen Energy